Phos-Copper-Tin Brazing Alloys/Aluminum Base Brazing Alloys/Brazing Wire and Brazing Ring

Model NO.: SCUP
Slag Characteristic: Alkaline
Stainless Steel Welding Rod Type: Chromium Stainless Steel
Function: Surfacing Electrode, Low Hydrogen Type Electrode, Hardfacing Electrode, High Efficient Iron Powder Electrode, Gravity Electrode, Moisture-Proof Electrode
Welding Power: AC
Certification: Ce, RoHS, UL, TUV
Delivery Time: 20 Days
Quality: High
Appearance: Rolling Wire/Straight/Ring
Melting Point: International Standard
Weight: 5kg/Box
Flux Containing: Containing Flux
Product Name: Brass(Copper-Zinc)
Trademark: As per Buyer
Specification: 5KG/Box
Origin: China
HS Code: 8311200000
Model NO.: SCUP
Slag Characteristic: Alkaline
Stainless Steel Welding Rod Type: Chromium Stainless Steel
Function: Surfacing Electrode, Low Hydrogen Type Electrode, Hardfacing Electrode, High Efficient Iron Powder Electrode, Gravity Electrode, Moisture-Proof Electrode
Welding Power: AC
Certification: Ce, RoHS, UL, TUV
Delivery Time: 20 Days
Quality: High
Appearance: Rolling Wire/Straight/Ring
Melting Point: International Standard
Weight: 5kg/Box
Flux Containing: Containing Flux
Product Name: Brass(Copper-Zinc)
Trademark: As per Buyer
Specification: 5KG/Box
Origin: China
HS Code: 8311200000
Brazing Wires Catalogue
 
Phos-copper Brazing Alloys
(Non-Silver Brazing Alloys)
Product Introduction
Andwin phosphor-copper brazing alloy is material with the binary alloy of copper-phosphors base, which has good mobility and processing property. It applies to contact welding, gas flame welding, HF brazing alloy has self-beazability and doesn't need brazing flux.
Product Number Chemical Composition(%) Impurity Melting Range  
Characteristic 		 
Application
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Cu P Sn Other
SCu-P-1 Surplus 7.5-8.5      
≤0.15 		1310/710 1436/780 Close to eutectic crystal composition low melting point easy flow into a small clearance Brazing seam  Use for Copper and Copper alloy parts, refrigeration compressor, not  suitable for brazing attacking shocking bend' parts
Scu-P-2 Surplus 6.8-7.5     1310/710 1472/790 Contain less phosphors, has better plastic nature, a little melting point Use for Copper and Copper alloy parts, air conditioning, refrigerator. Heater.
SCu-P-3 Surplus 6.1-6.8     1310/710 1508/820 Contain less phosphors, has better plastic nature, a little melting point Can make into many kinds of brazing ring, wires, brazing copper and cooper brazing ample clearance tie in.
                     
 
 
 
 
 
 
                         
Phos-copper-tin Brazing Alloys
(Non-Silver Brazing Alloys)
Product Introduction
Andwin phosphor-copper-tin brazing alloy, made by adding adding approrite stannum(Sn) to phosphor-copper brazing material, can lower melting point and improve mobility and wetting ability and also make the colour of brazing material turn into black.
Product Number Chemical Composition(%) Impurity Melting Range  
Characteristic 		 
Application
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Cu P Sn Other
SCuP-5Sn Surplus 4.8-5.8 7.0-8.0 Ni0.4-1.2  
≤0.15 		1148/620 1238/670 Low melting point.
Easy flow 		Use for Copper or Brass parts of water hater, radiant heating etc
ScuP-6Sn Surplus 5.0-6.0 5.0-6.0   1202/650 1472/800 Little high melting point.
Easy flow 		Use for Copper or Brass parts of water hater, radiant heating. Brazing ample clearance tie-in
SCuP-7Sn Surplus 6.5-7.5 6.5-6.75   1184/640 1256/680 Low melting point.
Easy flow 		Use for copper and cooper parts of water heater, water fountain fuel gas ware, radiant heating and deanser polishes etc
 
 Phos-Copper-Tin Brazing Alloys/Aluminum Base Brazing Alloys/Brazing Wire and Brazing Ring
 
                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Aluminum Base Brazing Alloys
Product Number Chemical Composition(%) Other Melting Range  
Characteristic
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Al Si Cu Zn Mg Fer
SA-1 Surplus 11--13 <0.3 <0.2 <0.1 <0.8  
 
 
 
 
 
Cr≤0.15 		557 582 Easy flow, good wettability and rust resistant Suitable for flame and funace brazing aluminium-aluminum alloys
SA-2 Surplus 9.3-10.7 3.3-4.7 <0.2 <0.15 <0.8 520 585
SA-3 Surplus 11-13 <0.25 <0.2 1-2 <0.8 559 591 Characterisitics similar to SA-1, suitable for vacuum brazing
Sa4043(Er4043) Surplus 4.5-6.0 0.3 0.1 0.05 0.8     Good crack resistance and versatility. Suitable for aluminum alloy gas welding and argon arc
  Sa4043(Er4047) Surplus 11-13 0.3 0.2 0.1 0.8    
 
 
 Phos-Copper-Tin Brazing Alloys/Aluminum Base Brazing Alloys/Brazing Wire and Brazing Ring
Cu-Al Flux Cored Brazing Alloys
 
Products Introduction 
 
Flux-Cored wire SH0215 is an innovation brazing materiale specially designed for electric components, it can braze esasily joints between Cu-Al, Copper wire and aluminum sheet,Al-al,etc. The brazing alloy has chemical composition up to 99% to imported alloys and it's completely in conformity Flux-cored wire SH2015 is specially suggested for the AL-AL brazing, it can guarantee high resistance and few chemical residue after brazing in paste which will be an easy solution or operators. We are available to supply such alloy in different shape and dimension according to request of customer.
 
Product Number Chemical Composition(%) Other Melting Range  
Characteristic
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Al Si Cu Zn Mg Fer
SA-1 Surplus 11--13 <0.3 <0.2 <0.1 <0.8  
 
 
 
 
 
Cr≤0.15 		557 582 Easy flow, good wettability and rust resistant Suitable for flame and funace brazing aluminium-aluminum alloys
SA-2 Surplus 9.3-10.7 3.3-4.7 <0.2 <0.15 <0.8 520 585
SA-3 Surplus 11-13 <0.25 <0.2 1-2 <0.8 559 591 Characterisitics similar to SA-1, suitable for vacuum brazing
Sa4043(Er4043) Surplus 4.5-6.0 0.3 0.1 0.05 0.8     Good crack resistance and versatility. Suitable for aluminum alloy gas welding and argon arc
  Sa4043(Er4047) Surplus 11-13 0.3 0.2 0.1 0.8    

Phos-Copper-Tin Brazing Alloys/Aluminum Base Brazing Alloys/Brazing Wire and Brazing Ring
Gordon
Changzhou Andwin International Corporation Limited
Add.:  No.91 Hanjiang Road New District Changzhou Jiangsu, CHINA
Website:  www.czandwin.com
   
Mob.:  0086 18136599633  / Tel.: 0086 519 83984950-801 / Fax.: 0086-519-83984950-808
      


  Brazing Wires Catalogue
 
Phos-copper Brazing Alloys
(Non-Silver Brazing Alloys)
Product Introduction
Andwin phosphor-copper brazing alloy is material with the binary alloy of copper-phosphors base, which has good mobility and processing property. It applies to contact welding, gas flame welding, HF brazing alloy has self-beazability and doesn't need brazing flux.
Product Number Chemical Composition(%) Impurity Melting Range  
Characteristic 		 
Application
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Cu P Sn Other
SCu-P-1 Surplus 7.5-8.5      
≤0.15 		1310/710 1436/780 Close to eutectic crystal composition low melting point easy flow into a small clearance Brazing seam  Use for Copper and Copper alloy parts, refrigeration compressor, not  suitable for brazing attacking shocking bend' parts
Scu-P-2 Surplus 6.8-7.5     1310/710 1472/790 Contain less phosphors, has better plastic nature, a little melting point Use for Copper and Copper alloy parts, air conditioning, refrigerator. Heater.
SCu-P-3 Surplus 6.1-6.8     1310/710 1508/820 Contain less phosphors, has better plastic nature, a little melting point Can make into many kinds of brazing ring, wires, brazing copper and cooper brazing ample clearance tie in.
                     
 
 
 
 
 
 
                         
Phos-copper-tin Brazing Alloys
(Non-Silver Brazing Alloys)
Product Introduction
Andwin phosphor-copper-tin brazing alloy, made by adding adding approrite stannum(Sn) to phosphor-copper brazing material, can lower melting point and improve mobility and wetting ability and also make the colour of brazing material turn into black.
Product Number Chemical Composition(%) Impurity Melting Range  
Characteristic 		 
Application
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Cu P Sn Other
SCuP-5Sn Surplus 4.8-5.8 7.0-8.0 Ni0.4-1.2  
≤0.15 		1148/620 1238/670 Low melting point.
Easy flow 		Use for Copper or Brass parts of water hater, radiant heating etc
ScuP-6Sn Surplus 5.0-6.0 5.0-6.0   1202/650 1472/800 Little high melting point.
Easy flow 		Use for Copper or Brass parts of water hater, radiant heating. Brazing ample clearance tie-in
SCuP-7Sn Surplus 6.5-7.5 6.5-6.75   1184/640 1256/680 Low melting point.
Easy flow 		Use for copper and cooper parts of water heater, water fountain fuel gas ware, radiant heating and deanser polishes etc
 
 Phos-Copper-Tin Brazing Alloys/Aluminum Base Brazing Alloys/Brazing Wire and Brazing Ring
 
                     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Aluminum Base Brazing Alloys
Product Number Chemical Composition(%) Other Melting Range  
Characteristic
Solidus
ºF/ºC 		Liquidus
ºF/ºC
Al Si Cu Zn Mg Fer
SA-1 Surplus 11--13 <0.3 <0.2 <0.1 <0.8  
 
 
 
 
 
Cr≤0.15 		557 582 Easy flow, good wettability and rust resistant Suitable for flame and funace brazing aluminium-aluminum alloys
SA-2 Surplus 9.3-10.7 3.3-4.7 HDPE Resin

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a thermoplastic polymer produced from the monomer ethylene. HDPE is commonly recycled, and has the number "2" as its resin identification code.It is sometimes called "alkathene" or "polythene" when used for HDPE pipes. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber.

Pp

Hdpe Resin,High Density Polyethylene,Hd Polyethylene,Hdpe High Density Polyethylene

Jiangsu Zijun International Trade Co., Ltd. , https://www.zijunplastic.com