China Tubeless Patch,Tubeless Tyre Patch manufacturers, welcome Tubeless Tire Patch,Tubeless Tyre Repair Patch purchasers from worldwide to visit our site. Tubeless Patch,Tubeless Tyre Patch,Tubeless Tire Patch,Tubeless Tyre Repair Patch KRONYO United Co., Ltd. , https://www.kronyotirerepairkit.com
Parts specifications:
The specifications of the wood-based panels are basically all inch sizes (1220mm×2440mm, 1220mm×1830mm), and the panel furniture is based on artificial panels. Therefore, if the specification of the parts is 392, 595, 195, etc. The size is suitable, will increase the utilization rate of the plate and reduce the waste.
In addition, after considering the specifications of the parts in accordance with the raw material specifications, consider whether the dimensions can be further reduced. For example, a drawer side panel, its width is set to 1150mm, the width of the raw material sheet is generally 1220mm this size is very conducive to increase the yield.
Thickness of parts:
There are many habits in the production of furniture. These habits are both good and bad. For example, furniture in the north tends to have heavy habits, and it is customary to use thick plates and large plates. This use of materials is disadvantageous in some cases. Such as drawer side panels, we commonly used 16mm, 18mm thick plate; but many manufacturers in the South, in high-end furniture has been commonly used 12mm thick plate.
Practice has proved that in the shape and strength, this size has stood the test. To expand, some small laminates, partitions, so that the side panels, top panels (such as bedside cabinets), can use 12mm thin.
The structure of the parts:
Many components, such as side plates and bulkheads, require thicker plates for molding purposes. In this case, sheets cannot be used for the purpose of saving materials. However, we can use the “inner structureâ€, which is often called “hollow structureâ€. Making wooden frames made of wood and then covering them with plywood saves both material and weight.
This move has been developed to be more mature and widely adopted. However, some weight-bearing parts, such as desk tops, are not suitable for this structure.
Furniture structure:
Furniture must have a solid structure, which is often said to be "solid", and some furniture can still meet the requirements of "solid" after omitting certain components. Looking at many of the commonly used products in the past, you can find many components that can be omitted. This savings is often huge and often overlooked. In addition, to break through the conventional framework, we must design more novel and novel products that are simple in structure and shape, so that we can get more results with less effort.
Making arrangements:
With the production of furniture, there will be many remaining materials that cannot be fully utilized. At this time, some products suitable for the size of these raw materials should be designed to make some small furniture, often because these furniture are very arbitrarily and creative, but they are very popular.
Outdated materials:
Some old materials that are outdated by some colors and patterns do not have a long-term backlog. They can make full use of furniture parts that are not exposed to light, such as partitions in floor panels and cabinets. It does not have to be consistent with the color and pattern of the outer surface material. Facts have proved that this method does not affect the appearance, does not affect the use of methods, but also more popular.
In addition to providing you with quality products, the artisan artisan health plate will also teach you a lot of little knowledge to bring convenience to you and your family! Fine materials, artisans, ecological your home!
Decoration plate can be such a province
For home improvement, many homeowners are ignorant. Most owners buy plates to go back and do furniture. They will follow the recommendations of woodworking masters to buy a certain number of plates. Even so, many of the owners who have been renovated will certainly know that there will be material leftovers, scraps and other issues. The artisan editor of the Top Ten Brands of Chinese Plates wants to say that, in fact, we can save the plates from the specifications, thickness, and structure of the plates.