Tip: The tanker is the same as ours. If you want to be beautiful and durable, you need to take good care of it. The maintenance chassis and engine of the tanker must be maintained according to the instruction manual. Don't disassemble without permission The tanker is the same as ours. If you want to be beautiful and durable, you need to take care of it. The maintenance chassis and engine of the tanker must be maintained according to the instruction manual. Do not dismantle the engine chassis and other important components in order to avoid unnecessary trouble for future maintenance. 1. Tank truck vacuum gauge 2, tanker oil pump When the tanker is not properly sucking or sucking oil, we need to consider starting to troubleshoot. Check whether the oil in the oil tanker's oil pump is normal, and ensure that the oil suction depth does not exceed 5m and the vent valves are in place. If there is no oil in the oil pump, 10L oil should be added. 3, tank car sound and other A. There are some simple troubleshooting methods for tanker trucks that drivers of friends need to pay attention to, according to some voices of tankers to determine whether the vehicles are in normal operation. b. When abnormal sound occurs in the power take-off of the tanker, the first consideration is whether the pressure of the tanker is not enough or the power take-off is not applied to the gear. Only the pneumatic power take-off device will make the air pressure read more than 0.3Mvpa. An abnormal sound occurs in the power take-off device of the tanker. Another condition is that the power take-off device is not attached to the gear, which may cause abnormal sound caused by the airtight seal. The application of oil tanker oil pumps is to be repaired and maintained at designated service stations within a certain period of time, so that their service life will be longer and they will be better used for transportation. Also strictly follow the instructions for use and maintenance. Huahe Forklift Truck,Yanmar Engine Forklift,3 Ton Diesel Forklift Truck Huaxin Electric Motor Co., Ltd. , http://www.wfgenerator.com
In the process of using the tanker for a long time will inevitably encounter some failures, although maintenance stations throughout the country are all over, but far water can not save the near fire, then you need the driver's friends to understand some of the daily simple maintenance knowledge, timely processing of oil Some common problems with tankers.
Tanker vacuum gauge is also need to be treated with caution, when the tanker vacuum indicates low or no value, the cause of this failure may be the suction pipe part is not tight or the pump impeller clearance increases, more Seriously, the vacuum gauge may have been damaged. At this time, it is necessary to inspect and repair the tanker vacuum gauge, or replace the vacuum gauge with a new one.
Tanker filter nets should be regularly dismantled and cleaned, and tanker trucks should be regularly cleaned. Safety valves must always be checked and cleaned as required. Regularly check whether the connections of the piping system are well connected and reliable.
After each working of the tanker, the end caps of the inlet and outlet and the ends of the oil hose should be timely covered.
If the tanker has a long service life, the tanker must be regularly inspected to solve the problem in time, so as to ensure the longest service life of the tanker.