According to the number of screws, it can be divided into single-screw, twin-screw, triple-screw, and multi-screw. Twin-screw can be divided into parallel twin-screw and conical twin-screw. The most significant difference between parallel and conical twin-screw extruders is the screw machine. The geometry of the cylinder is different, which leads to many differences in structure and performance. Although the characteristics of the two are different, they have their own advantages. Parallel Twin Screw Barrel,Extruder Screw Barrel,Plastic Extrusion Screw,Injection Molding Screws And Barrels Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com
1. Cleans and protects sensitive electronic equipment.
2. Helps prevent contact failure.
3. Multi-surface, Quick-drying formula.
Application:
1. Shut off power and allow any hot surfaces to cool. Make sure all stored power is drained from the system
2. SHAKE CAN WELL
3. Hold can 6"-8" away from the surface and spray directly onto the electronic device or circuit board to eliminate and remove
any contaminants that may cause loss of electrical contact
4. Tilt surface while cleaning and allow any excess cleaner to run off
5. Allow product to dry completely and thoroughly vent the system before restoring power
Attention:
1. Keep out of reach of children.
2. Store in a cool and dry place, and avoid direct sunlight.
3. In case of contact with eyes, please flush with a great of water and go to the hospital immediately
4. Keep away from flame, spark and another kind of ignition.
5. For eyes or skin contact, flush with water for 15 minutes.
China-Car-Accessories-China-Provide-Nonflammable-Electronical-Equipment-Aerosol-Contact-Cleaning-Spray-Contact-Cleaner
Features: