Safety Seats Injection Molding Parts
There are many kinds of Plastic Injection Components, customized drawings, factory direct sales prices are more favorable, various material specifications are complete, from design to processing, we have all-inclusive, professional customer service, and provide you with the best solution.we will quickly quote you, the customer confirms the quotation and places an order, the product processing is completed and the packaging logistics is arranged, and the customer confirms the receipt Goods praise. Plastic Injection Insert Molding is versatile and durable, we only make high-quality Plastic Parts.
Plastic mold casting systems can be divided into three categories according to different types of molds: Safety Seats Injection Molding Parts,Abs Plastic Injection Handle Molding Parts,Plastic Injection Molding Abs Cover,Custom Plastic Injection Molding Car Parts Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com
Factory selling
High Quality Control
Fast Delivery
UN38.3 test standard lithium battery test equipment/ Vibration test systems is used to educational, research, and laboratory environments. Structural response testing, Modal analysis, separation and compacting of powders, small component vibration screening, Vibration transducer calibration and so on.
UN38.3 test standard lithium battery test equipment/ Vibration test systems feature:
1. Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
Horizontal Stand features:
Within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.
Horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust.
Static pressure track, V-shape, with capacity of slope-resistant and bias-loading resistant.
Built-in oil pump, good structure and easy operating.
Vertical Extended-bench features:
VT vertical extended-bench and specified clamps, precision calculated, elaborate design, to ensure the customer acquired the best performance according to perfect
Structure, high quality material and workmanship.
Model
Rated Sine Force (N)
Rated Random Force (N)
Frequency Range (Hz)
Rated Acceleration  (m/s 2 )
Rated Speed(m/s)
Rated Replacement (p-p)mm
Max. Loading (Kg)
moving coil (Kg)
Dimension of Moving coil(mm)
ES 1
1000
1000
3-3500
400
1.2
25
70
2.5
Φ 150
ES 2
2000
2000
3-3500
800
1.6
25
70
2.5
Φ 150
ES 2a
2000
2000
3-3500
300
1.6
40
70
8
Φ 230
ES 3
3000
3000
3-3500
1000
1.6
25
100
3.5
Φ 150
ES 3a
3000
3000
3-3500
400
1.6
40
120
9
Φ 230
ES 6
6000
6000
3-3500
1000
1.6
25
180
6.5
Φ 230
ES 6a
6000
6000
3-3500
1000
1.6
51
250
12
Φ 230
ES 10
10000
10000
3-3000
1000
1.8
51
270
14
Φ 240
ES 20
20000
20000
3-3000
1000
1.8
51
300
30
Φ 320
ES 30
30000
30000
3-2800
1000
1.8
5l
450
40
Φ 450
ES 40
40000
40000
3-2800
1000
1.8
51
500
50
Φ 450
ES 50
50000
50000
3-2700
1000
1.8
51
750
50
Φ 450
ES 60
60000
60000
3-2700
1000
1.8
51
750
60
Φ 450
ES 100
100000
100000
3-2500
1000
1.8
51
1000
90
Φ 450
ES 120
120000
120000
3-2200
1000
1.8
51
1100
90
Φ 500
ES 160
160000
160000
3-2100
1000
1.8
51
1500
150
Φ 600
ES 200
200000
200000
3-2000
1000
1.8
51
2500
200
Φ 650
ES 350
350000
350000
3-1700
1000
1.8
51
4500
300
Φ 870
(1) Door mold, gate and gate parting line, mold and peeling, the most simple design, convenient processing, and low cost, so more and more people use the door system to operate.
(2) Nozzle mold: The gate and gate line are not divided into types. Usually, a set of nozzle parting line is designed directly in the product design. The design is more complicated and the processing is difficult. The fine nozzle system is often selected according to the product requirements.
(3) Hot runner mold, the mold is the same structure and fine nozzle, the biggest difference is that one or more heat flow, temperature and hot pumping nozzle, but not cold feeding and demoulding, the runner and gate are directly on the product, So the port does not need demoulding, also known as pouring system, this system can save raw materials, suitable for products with expensive raw materials, high demand, difficult mold design and processing, and high cost. The heat flow channel system, also known as the heat flow channel system, is mainly composed of a heat flow channel cover, a heat flow channel plate and a temperature control electrical box. There are two commonly used heat flow channel systems: single-point heat flow channels and multi-point heat flow channels. Using a single-point thermal gate, the molten plastic is injected directly into the cavity with a single thermal gate sleeve. Multi-point hot sprue is used to branch molten material into each hot sprue sleeve and then through the hot sprue plate into the mold cavity
Un38.3 Test Standard Lithium Battery Test Equipment/ Vibration Test Systems
Model NO.: ES-6
Package: Standard Wooden Case
Size: Our Standard Size or Customzied
Delivery: 45 Days
Warranty: One Year Free Warranty
Certifications: CE
Trademark: ASLi
Specification: Customized
Origin: China
HS Code: 903180909
Long historay manufacturer (Start from 1988)