Giving you the parts of an IR horizontal single-stage single-suction centrifugal pump, can you assemble them? Or to you a complete IR horizontal single-stage single suction centrifugal pump, you will disassemble it? IR horizontal single-stage single-suction centrifugal pump should be checked before assembly of parts have no affect the assembly defects, and scrub clean before assembly. 1, will be around the connecting bolts, plug, etc. were tightened in the corresponding parts. 2, the 0 ring, paper pad, felt, etc. were placed on the corresponding parts. 3, the seal ring and packing, packing ring, packing gland, etc. are installed into the pump cover. 4, the rolling bearing mounted on the shaft, and then loaded into the suspension, and then close the gland, bearing pressure on the rolling, and set the shaft on the connecting bolts. 5, the shaft sleeve on the shaft, then the pump cover mounted on the suspension, and then the impeller, stop pad Wai, impeller nuts, etc. installed and tightened. 6, Finally, the above components into the pump body, and tighten the pump body, pump cover bolts. In the above assembly process, some small parts, such as flat key, gear oil pan, gear shaft, o-ring seals and other easy to escape or wrong order, should pay special attention. Know the order of the pump assembly, demolition is also much easier, pump disassembly order can basically reverse the order of the assembly.
QUANTUM Workshop has been supplying steel equipment and structure manufacturing service from the year of 2011. We focus on producing the highest quality conveyor equipment and metal products with advanced steel fabrication processes and machinery. Our commitment to quality metal products, superior customer service and ability to manufacture and assemble has earned us the trust and recognition from our clients in Australia and Asian countries.
Our Fabrication capacity includes but is not limited to:
Structure Engineering Design and Shop detailing services
All Industrial Conveyors, belt conveyor, Chain Conveyor, Bucket Elevator, Screw Conveyors etc.
Heavy industry workshop building structures
Industrial process plant buildings, trusses, trestles
Mining equipment, plate works (chutes, hoppers, bins, tanks etc.)
Non-pressure vessel/tanks
Pipe spools fabrication
Steel Structures Installation
Raw Material can be carbon steel, stainless steel etc. Surface protection can be painted or hot dip galv.
As a diversified supplier, we are able to handle complex projects and can offer a one-stop shop service from detail design and shop detailing to supply and fabrication. This allows for a large reduction in indirect cost and risks. All work is done under one roof and will reduce the number of interfaces and contracts, thus saving on management cost and risks for our clients.
Customized Steel Fabrication,Steel Structure Manufacturing,Structural Steel Fabrication,Custom Metal Fabrication Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.ycectech.com
IR horizontal single-stage single-suction centrifugal pump assembly and disassembly order
ã€Print】 ã€Close】