Beit shares the maintenance of turbine flowmeter sensors



The structure of the intelligent integrated turbine flowmeter is an explosion-proof design. It can display the total flow rate, the instantaneous flow rate and the flow rate percentage. The battery uses a long-lasting lithium battery. The service life of a single-function integrated battery can reach more than 5 years. , Multi-function display battery life can reach 12 months or more.
The intelligent integrated meter can display many flow units in cubic meters, gallons, liters, standard cubic meters, standard liters, etc. The fixed pressure can be set, the temperature parameter compensates for the gas, and the pressure and temperature parameters change. For occasions that are not large, the flowmeter can be used for fixed compensation integration.
The maintenance of the turbine flowmeter sensor part requires the following:
Use and adjust:
When used, the liquid to be tested should be kept clean, free from fibers and particles and other impurities.
When the sensor is used, the sensor should be filled with liquid slowly, and then the outlet valve should be opened. The sensor is strictly prohibited from being impacted by high-speed fluid when it is in a liquid-free state.
The maintenance period of the sensor is generally six months. During inspection and cleaning, please be careful not to damage the parts in the measuring chamber, especially the impeller. Please pay attention to the positional relationship between the guide and the impeller when assembling.
When the sensor is not in use, the internal liquid should be cleaned, and protective sleeves should be put on both ends of the sensor to prevent dust from entering and then stored in a dry place.
â—† When used, the filter should be regularly cleaned. When not in use, the internal liquid should be cleaned. Like the sensor, add the dust jacket and store it in a dry place.
The transmission cable of the sensor can be laid overhead or buried (when buried, iron pipes should be put on.)
Before the sensor is installed, connect with the display instrument or oscilloscope, connect the power supply, blow or hand-push the impeller, so that it can quickly rotate and observe the display, and then install the sensor when it is displayed. If there is no display, check the relevant parts and troubleshoot.
The quality, integrity and product quality of Suzhou Beit Intelligent Instrument Co., Ltd. have been recognized by the industry. Beit Instrument has always adhered to the principle of “treat hardship, treat people with sincerity, pursue excellence, customer first, quality first”, and constantly forge ahead and develop steadily.
Beit hopes to provide you with effective and reliable measurement solutions and measurement equipment based on our years of experience in development, production and system design. At the same time, we can design and manufacture special products to meet customer needs.
Beit company welcomes friends from all walks of life to come to visit, guide and negotiate business. We sincerely hope to cooperate with people from all walks of life sincerely for common development and create brilliance.

Baking Tools Decoration Cake Mold

Brand: Silicone Baking Pan

Parameter:


Product Features

1. 100% food-grade silicone comply with FDA and/or LFGB international standards.

2. Eco-friendly, harmless, non-toxic and non-stick finish.

3. Working temperature –40℃ to 230℃.

4. Safe for dishwasher, microwave, oven and freezer.

5. Durable and long life time.

6. No abnormal odor nor staining and easy to clean.

Chuangxin Rubber, Plastic & Metal Co., Ltd. , https://www.chuangxinsilicone.com