Industrial gear oil

Industrial gear oils are used to lubricate positive, oblique, herringbone, bevel gears and worm gears. Divided into the following: 1 closed gear oil. General gear oil is used for gear lubrication of light load operation; extreme pressure gear oil contains more extreme pressure anti-wear agent for gear lubrication of medium, heavy load or impact load, used in the metallurgical industry, generally used in American gears Manufacturers' Association and American Steel Corporation's specifications. 2 open gear oil. High viscosity, strong adhesion. With heavy lubricating oil plus asphalt or polymer adhesive preparation, for the convenience of use can add thinner. 3 Worm gear oil. With refined petroleum lubricating oil or synthetic oil plus the appropriate amount of fat or oil agent adjusted.

advantage

The lowest mechanical stress under high loads will not cause premature fatigue due to two-way friction.

Ensure the longest service life of machine components and reduce operating costs.

Even if splash effects occur due to unfavorable flow conditions, trouble-free operation is ensured.

Under the highest load conditions, the long service life of the oil can still be maintained.

Provides reliable rust and discoloration protection for machine parts.

application

Especially suitable for most modern high-efficiency hydraulic actuators.

Can be used as locomotive hydraulic transmission working oil.

Can be used as a medium for a load transmitter in a fixed integration.

According to the requirements of the equipment manufacturer, it can be used for special hydraulic systems, hydraulic clutches and torque converters.