The three main points when washing a car


No car wash after the rain

Many owners believe that the rain-washing vehicle after rain will be very clean and there is no need to go to a special car care shop to wash the car. This is not the case. First of all, the rain, especially the mud, contains many invisible particles. The undulation of the body, these particles rubbed like carpentered paint. Therefore, in order to better protect the car paint must wash the body after the rain, and secondly, the acidity of the rainwater in the city is now higher, the team washing rainwater will have a corrosive effect on the car paint.

The correct method: After the rain, we must first thoroughly clean the car. For car paint minor damage, such as acid rain, alkaline water, aviation oil and diesel oil stains, cement points, etc., you can use vehicle mix or polishing agent. deal with. The specific method is to pour the polish on a soft cloth, and wipe it gently along the scratches to remove the stain. If you can make some car waxes, it will be even brighter. After the rain, wash the car in time, do not allow the paint to air dry naturally after the car wash, but it should be wiped clean, otherwise it will easily appear after removing the original non-responsibility water marks.

Instantly clean up stains on the body

In the hot summer months, the asphalt on the hard side of the road will be stained. At this time, it should be removed immediately. However, during the cleaning process, avoid scraping with a blade or using gasoline to avoid damage to the paint. Driving in the rain or at night is accompanied by many small insects on the paint film. Most of these insects secrete acidic substances. If the secretions and dead bodies are not cleared in time, many small spots will appear on the paint film and it will be difficult to restore the original state.

Correct practice: Asphalt removal can buy a can of asphalt remover in Auto City. Waxing is best done once a month before the rain, so as to play a sealing role.

Detergent does not meet the requirements

Some car owners use car washing powder or soap to wash cars in order to save money. Because there is too much alkali in washing powder or soap, it is easy to neutralize car paint oils and corrode car paint. Even some tires show signs of aging after about two years of use—there are transverse elongated cracks on the sidewalls. Excluding the use of factors such as improper maintenance of tires by vehicle owners or long-term low air pressure, frequent use of road shoulders, etc., it is highly probable that alkaline washing liquids cause premature tire aging.

The right approach: choose a better quality professional car washes. Professional car wash PH value is neutral, will not attack the surface of the car, such as containing water wax components, but also in the car wash at the same time to give the body a moisturizing effect, often car wash, the car wash more bright. In the cleaning of the car should pay attention to the different parts of the vehicle material, and more chaotic, scattered, should choose to use different cleaning agents. Most interior decorators who use car interiors will use alkaline cleaners. Although they have the effect of whitening and decontamination, they will have certain troubles. Alkaline cleaners will soak in flannel, leather chairs, and ceilings. , Eventually there will be knots and cracks. The professional practice should be to choose a cleaning solution with a PH value of no more than 10, to match the special beauty machine in the car. When cleaning, there is a large amount of circulating water to bring out the dirt and detergent, and the water inside this part The air is pumped out so that the moisture does not get too heavy and it will rot or fall off over time.

Steel Recycling Machine

For steel scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic steel recycling machine can help. If your scraps are small chips, you can choose our Steel Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Steel Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our steel shear to cut your scraps to be smaller pieces.

Steel Shavings Recycling Machine, Steel Turnings Recycling Machine, Steel Scraps Recycling Machine, Steel Chips Recycling Machine, Waste Steel Recycling Machine

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com