Straw drying equipment successfully tested in Shandong

Drying equipment

The straw drying machine developed and produced by Shenyang Yitong Venture Drying Equipment Co., Ltd. was successfully tested in Shandong and passed strict tests and acceptances by the national environmental protection and quality departments. This set of drying unit is a special drying equipment for the straw board production line of British COMPAK company, with an annual output of 30,000 cubic meters of straw board.

干燥设备

Straw drying equipment

The straw production panel technology is a revolutionary result of the British company COMPAK's bio-fiber zero formaldehyde environmental protection panel technology. The wheat stalks, rapeseed stalks, corn stalks and other crop stalks are the main raw materials for production, and the supporting technologies of the British COMPAK company include many processes, such as low-pressure high-speed nozzle injection MDI glue and demoulding, to achieve a major breakthrough in the field. The high-tech adhesive polymer resin MDI is mixed with straw to form a stable and uniform industrial-grade agricultural fiber board. The quality of the finished product can be changed by changing the size of the fiber, the density of the panel material, and the amount of MDI used. The product is lightweight, high-strength, moisture-proof, formaldehyde-free, and reusable, and is widely used in the construction industry, furniture decoration industry, and industrial packaging. In other fields, it caused a new revolution in sheet metal. A lot of formaldehyde processing technology has been used in the past to solve the plate processing technology, a large amount of formaldehyde must be used, causing environmental pollution problems.

Kangbai green straw board technology has successful cases in many parts of the world such as the United Kingdom, the United States, Germany, Spain, Indonesia, Canada and Vietnam. Since entering China in 2002, a number of green environmental protection straw homogenization board production lines have been built in the country, which is in line with the national new energy industry policy and has a very good market prospect. However, due to the relatively high technical requirements for the straw drying process, the drying equipment has been dependent on imports. This successful acceptance marks that the high-tech zero-formaldehyde straw board drying equipment has been completely domesticated, and the equipment index has reached or even surpassed the UK imported equipment. .

At present, COMPAK has signed a close cooperation contract with Shenyang Yitong Venture Drying Equipment Co., Ltd. to designate Shenyang Yitong Company as the only straw drying unit in China to provide the manufacturer, and on this basis, realize resource sharing and closely develop related technologies. And equipment. This cooperation has greatly enhanced the technological and market advantages of Shenyang Yitong Venture Drying Equipment Co., Ltd. in the field of biomass drying such as straw, sawdust and sawdust.

News link:

Straw dryer is widely used in drying corn stalks, drying soybean stalks, drying cotton stalks, drying wheat stalks, drying high-stem stalks, drying wood chips, drying chips, drying sawdust, and drying gingko biloba leaves. Mulberry leaf drying and other agricultural cellulose materials drying. The equipment can use hot air to heat the fluid, or it can use steam to conduct heat transfer. Drying speed, drying intensity, short residence time. Automatic control, stable and reliable operation. The coal-fired system adopts a fuzzy controller and the temperature can be automatically controlled to ensure the quality of the dried product. Safe production and reliable operation. Multi-stage waste heat is utilized in the system, and the overall thermal efficiency is increased by more than 10%, so that the cost of drying is greatly reduced.

Oxygen Plant

Oxygen Plant is one kind of oxygen generation system producing oxygen. There are several types, one is small Oxygen Concentrator, producing small flow rate oxygen up to 20 liter per minute, it is mainly used at home. Another type is bigger flow rate oxygen plant, also using pressure swing adsorption technology. With this technology, oxygen with flow rate up to 200 Nm3/hr is suitable. For oxygen production flow rate from 200 to 3000 Nm3/hr, more suitable solution is using vacuum pressure swing adsorption technology. Its operation cost is more lower than PSA for this big flow rate oxygen production. For oxyen production bigger than 3000 Nm3/hr, normally use cryogenic technology. With this technology, oxygen production capacity can be 100000 Nm3/hr.

Cylinder Filling Oxygen Plant,Psa Oxygen Plant,Medical Oxygen Plant,Hospital Oxygen Plant,Gaseous Oxygen Plant

Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagases.com