Runde produce end feed Brass Fittings for European market.the quality satisfy Kitemark,end feed brass fittings,EF brass fittings,solder joint brass fittings,EN1254 brass fittings,brass pressure fittings,wrot joint brass fittings. end feed brass fittings,EF brass fittings,solder joint brass fittings,EN1254 brass fittings,brass pressure fittings,wrot joint brass fittings Taizhou Runde Company , https://www.zjbrassfittings.com
Yu Jiang, General Manager of China Guangdong Nuclear Power's Dasheng Accelerator Division, introduced that in order to better solve the world-wide problem of sewage treatment, CGNPC Dasheng cooperated with the Institute of Nuclear and New Energy Technology of Tsinghua University to undertake the National 863 Program, the Ministry of Science and Technology, Sino-Russian International Special tasks such as scientific and technological cooperation projects and IAEA technical assistance projects successfully developed special electron accelerators and irradiation reactors for sewage treatment, effectively combining ionizing radiation technology with conventional wastewater treatment processes to efficiently treat toxic, hazardous or refractory industrial wastewater.
"Ionizing radiation treatment of sewage does not require the addition of additional chemical reagents. It has the advantages of wide adaptation, rapid reaction, and high degradation efficiency. It has been listed by the International Atomic Energy Agency as the main research direction for the peaceful use of atomic energy in the century." According to Yu Jiang, the China Nuclear Power Corp. Shengli and Tsinghua University have conducted long-term and in-depth research and cooperation in the treatment of industrial wastewater by electron beam irradiation, and formed core equipment and processing technologies with completely independent intellectual property rights. At present, China Guangdong Nuclear Power Co., Ltd. is a world leader in ionizing radiation pretreatment technology and devices for industrial wastewater.
According to Zhang Jianfeng, chairman and general manager of CGN Tech, the textile printing and dyeing industry produces a large amount of waste water, contains complex pollutants, contains a lot of harmful substances that are difficult to biodegrade, and Jinhua Demonstration Project uses electron beam irradiation technology to perform advanced treatment on printing and dyeing wastewater. At present, the daily processing capacity is 1,500 to 2,000 cubic meters, which can highly remove the residual pollutants in the wastewater and achieve high-level discharge of wastewater or reuse of water. The technology can also be applied to the wastewater treatment of papermaking, chemical, pharmaceutical and other industries, as well as the wastewater treatment of industrial parks with complex water quality. It can also be used for the harmless treatment of hazardous wastes such as antibiotics wastewater and fungus residue and the development of the market. Broad prospects.
China's First Electron Beam Irradiation Treatment Industrial Wastewater Project Operation
China Guangdong Nuclear Power Group, headquartered in Shenzhen, reported on the 15th that the China's first demonstration project for the treatment of industrial scale printing and dyeing wastewater with electron beam irradiation was formally launched in Zhejiang Jinhua, marking the entry of a new brand of electronic accelerator applications in China. field.