S&A has an Australian customer in cryogenic storage tank, who has
cooperated with S&A for more than six months. Previously, the
customer sent an e-mail to S&A to learn the model of water chiller
for cooling gas storage equipment.
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
Bonded Injection Moulding NdFeB There are two main Bonded NdFeB Magnet manufacturing methods: Bonded Injection Moulding Ndfeb,Neodymium Bonded Electrical Magnet Ring,Ndfeb Plastic Injected Bonded Magnet Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com
After learning the technical parameters of the customer`s equipment,
S&A found that the cooled water chiller CW-5300AI with 1800W cooling
capacity, lift of 25M and the maximum flow of 16L/min perfectly matches
the Australian gas storage equipment. So, S&A recommended the
CW-5300AI water chiller to the customer.
At the same time, the Australian customer also focused on the problems
about whether S&A water chiller has refrigerant charging valve and
whether the power socket is applicable. The plug of all S&A water
chillers has different models for the power sockets of many countries,
which not only applies to Australia, but also applies to other
countries. In addition, all S&A cooled water chillers are equipped
with refrigerant charging valve, so as to enable customers to
infuserefrigerant.
S&A has a perfect laboratory test system to simulate the use
environment of water chillers, conduct high-temperature test and improve
quality continuously, aiming to make you use at ease; and S&A has a
complete material purchasing ecological system and adopts the mode of
mass production, with annual output of 60000 units as a guarantee for
your confidence in us.
The technical parameter of CW-5300: http://Products/ChillerCW53001800Wco.html
ï‚·Bonded Injection Plastic Moulding NdFeB
ï‚·Bonded Compression Moulding NdFeB
Injection Plastic NdFeB magnet, a kind of new-generation composite material made from permanent magnetic powder and plastic, has outstanding magnetic properties and plastic properties and features high size precision and exceptional shock resistance. It can be processed into various components with complicated shapes, thus can be used in the industries of micro or special motors, office equipment, intrument, meter, and beeper. Custom design will be available.
Production Chart of Bonded Injection Plastic Moulding NdFeB
Bonded NdFeB Magnet has advantages and that's why customers choose:
1. Design and manufacturing of orientation moulds were carried out.
2. Having high dimensional precision and impact-resistance. Capable of forming products with inlay.
3. The Injection Plastic Moulding parts are suitable for forming products with various shaps and thin walls.
4. Muti-polar magnetization can be carried out according customers' requirements.
Application of Bonded Injection Moulding NdFeB magnets:
•Different kinds of micro-special motor
•House electric apparatus
•Synchronization electric motor
•DC motors
•Instruments for Auto
•Time gauge