Recently, Southeast (Fujian) Automobile Industry Co., Ltd. and Mitsubishi Motors Sales (China) Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recalls. Recall batch/involved: (1) The Mitsubishi brand Wingshen Automobile produced by Southeast (Fujian) Automobile Industry Co., Ltd. from August 24, 2009 to November 30, 2013, totaling 40,146 vehicles; (II) The Outlander EX Jinjie, Lancer EX and Lancer Wing Lushen Automobiles, which were imported by Mitsubishi Motors Sales (China) Co., Ltd. from January 12, 2009 to October 14, 2010, totaled 18,147 vehicles. Start recall time: from April 20, 2015. Reason for recall: Due to the manufacturer's manufacturing reasons, the resistance of the capacitor used in the internal transformer circuit (12V→5V) of the vehicle's delay alarm controller (ETACS-ECU) is too large. The voltage inside the alarm controller changes, and the monitored internal voltage system may be abnormal, causing the control function of the delay alarm controller to stop. The vehicle warning light flashes, the engine cannot start, the headlights and the turn signals flash, and the wiper action is abnormal, which poses a safety hazard. Solution: Southeast (Fujian) Automobile Industry Co., Ltd. and Mitsubishi Motors Sales (China) Co., Ltd. will inspect the time delay alarm controller of the vehicle within the recall range and replace the improved parts for the problematic vehicles for free. Security risks. Southeast (Fujian) Automobile Industry Co., Ltd. and Mitsubishi Motors Sales (China) Co., Ltd. will actively contact relevant users through their authorized service outlets to arrange recalls. Estimated length of repair: depending on the inspection. It is recommended that the relevant owner pays the relevant 4S shop for repair in time. If the recall claim period is missed (usually 6 months or 1 year), the post-maintenance will be self-funded. Manufacturer's customer service phone: Users can log on to Mitsubishi Motors Sales (China) Co., Ltd. website , or call Southeast (Fujian) Automobile Industry Co., Ltd. service hotline 400-661-1666, Mitsubishi Motors Sales (China) Co., Ltd. service hotline 800-820-6630/400-821-6630 for consultation. Query by VIN (Vehicle Identification Number) whether it is in the recall range: Mitsubishi Motors recall range VIN code query. Welding neck flange are distinguished from other types by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the flange proper from the standpoint of strength and resistance to dishing. Welding Neck Pipe Flange,Weld Neck Rf Flange Dimension,Good Quality Din 2631Flange,Custom Din 2631Flange New Century Forging Co., Ltd , https://www.ncmflange.com
The welding neck flanges are normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The welding neck flange is the best designed butt-welded flange of those currently avaliable because of its inherent structural value. It is expensive because of the design.