Recently, a friend told us to cry that he was fined by the traffic police. The reason was that he had not posted an annual inspection mark. He felt very aggrieved because all the procedures were all in place and they were in the car. He also showed it to the traffic police, but the traffic police simply ignored him and continued to pass the ticket to the end! If the vehicle does not have a strong risk sign, an annual inspection mark, and a green environmental protection standard, the traffic police will certainly impose penalties, and sometimes it will swiftly deduct traffic. However, as with the friend mentioned above, the procedures are all complete. Will the penalty be punished? The reason is that the annual inspection qualified sign, the compulsory traffic accident sign, and the green environmental protection label are not affixed to the prescribed location. According to Article 13 of the "Regulations for the Implementation of the Road Traffic Safety Law," the vehicle's inspection qualified sign and insurance sign should be affixed to the top right corner of the front window of the motor vehicle. . Why do the owners refuse to post these signs? We have conducted relevant investigations in response to this situation, but we have been surprised by the results. 1. Concern that it is not easy to clean up after applying the logo, only the label can be placed in the car; 2. A lot of car owners think that there is no fear, feel that their procedures are complete, do not paste it is not posted it, when the time to get out to the police to see on the line, the friend who said above is this mentality. 3. Some car owners feel that multiple standards have to be affixed, but they are also more and more affixed and are not beautiful. In any case, it is against the law not to stick on the windshield of a car, so don’t be lucky enough to stick it. If you are concerned that it will not be easy to remove the logo, there is still a way to waive this concern. You can try it out. Tips: First put a new logo on a transparent plastic or packaging film, and then evenly coated with solid glue, directly attached to the top right of the front windshield. In this case, whether it is changing the glass or sticking a new standard, it will be much easier . And the glue trace above is wiped clean with a damp cloth! There is also an electrostatic film, which can be first attached to the electrostatic film on the annual inspection and traffic risk signs, and then stuck to the upper right of the window so that it can be easily replaced. Raw material (free-flowing dry powder or small granules ) is loaded in the granulating bowl of which the bottom is made by perforated plate. Clean hot air flows through the perforated plate to completely fluidize the material. Meanwhile, liquid binder is sprayed onto the fluidized material. Fine powder collides with droplets and stick together to form granules or agglomerates with good flowability and instant solubility. Fluid Bed Granulator,Fluidized Bed Granulator,Top Spray Granulator,One Step Granulator Changzhou Bole Tech Co.,Ltd , https://www.bolecoater.com