Installation process of the fan: ensure the stability of the fan bracket during the installation process, avoid large vibration during the moving process, install a flexible air duct at the exit section of the fan, and securely tie the connection position between the two to avoid Big air leakage. When installing the fan, it needs to maintain a certain height to allow the fan and the duct to connect smoothly. Installation process of the duct: During the implementation of the entire ventilation scheme, one of the most used and most influential materials is the duct, which can usually be divided into flexible and rigid. Among them, the rigid seal official generally has a higher cost first, more difficult to handle, a large error in the construction process, and it is difficult to recover after deformation, so most of the actual construction process will choose flexibility. Duct. Be sure to pay attention to the smoothness when arranging the duct. If you choose a PVC zippered duct, you need to pay attention to the following points: 1) You need to keep the inner and reverse sides of the duct consistent with the wind direction, and minimize the windage; 2) to avoid the position on the face of the hand The blasting causes excessive air duct consumption. It is necessary to install an old air duct with a length of 40m at the end position of the air duct, and the distance between the outlet and the face of the hand is controlled to be between 30m40m; 3) in order to avoid the transportation process If the air duct is hanged, the air cylinder must have a certain height. 4) If the space of the flat guide is limited, it is necessary to close the dome as much as possible when installing the air duct to avoid the phenomenon that the air cylinder is suspended and damaged by the transport vehicle. ; 5) Once the air duct is damaged, it must be glued in time. Pure Water Filling System,Pure Water Filling Equipments,High Quality Pure Water Filling Machine Zhangjiagang Mark Beverage Machinery Co., Ltd. , https://www.markfilling.com