What should be done to maintain the magnetic separator?

Wet magnetic separator is commonly used iron ore equipment (iron ore magnetic separator) and manganese ore equipment (manganese ore magnetic separator), is the mainstream of the strong magnetic separator mineral processing equipment. After sorting by a wet magnetic separator, it can generally increase 10%-30% grade.

There are many types of minerals available for wet magnetic separators, so the maintenance of magnetic separator equipment is an extremely important and regular task. It should be closely coordinated with the extreme operation and maintenance, and there should be full-time personnel on duty inspection. . In the safe production of wet magnetic separators, maintenance work must be done well. In general, the maintenance work of wet magnetic separators has the following aspects:

Newly installed tires are prone to loosening and must be checked frequently.

The shaft bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean, the seal must be good, and the main lubrication of the machine Department 1, rotating bearings 2, roll bearings 3, all gears 4, moving bearings, sliding planes. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.

Pay attention to check the wear of the wearing parts, and always pay attention to replacing worn parts.