Round Downpipe Roll Forming Machine
Round Downpipe Roll Forming Machine is used for building, it can as rain gutter uses.
This machine includes one set Decoiler, guiding equipment, main roll forming machine, PLC control system, hydraulic cutting and receving table.
It has two cutting modes: flying saw cutting and mould cutting.
Specifications:
Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Receiving table
Pictures of machine:
Training and Installation : Round Downpipe Roll Forming Machine,Gi Round Downpipe Roll Forming Machine,Gl Round Downpipe Roll Forming Machine,Round Downpipe Roll Cold Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyeemachines.com
Eddy current separator, non-ferrous metal separator is mainly used for recycling of non-ferrous metal. Typical Material is: wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part ,non-ferrous metal scrap, dross for printing ,broken glass contains non-ferrous .electronic wastes etc.
The main structure is consisted of five parts ,which are permanent roller parts, conveying belt transfer device, vibration feeder, material taker and machine frame( High grade magnetic roller is available if necessary)
Feature:
1.with high efficiency ,stable working structure ,light frame.
2.with high adaptability, great processing capacity
3.It is widely used in environmental-protection area, especially in the non-ferrite recycle field
4Convenient operation and run for a long time .
5the speed of belt and the rotation speed of high frequency magnetic roller are both adjustable.
 Technical Parameters
NO.
Model
Capacity
(m³/h)Diameter of
 the separator roller   Â
 (mm)Speed of the
 separation rollerÂ
(r/min)Drum
 speedÂ
(r/min)Driving Power
(kw)Weigh
(kg)
Separator roller
Belt speed
1
BTWFX-40
≤4
320
50-2800
60-150
4
1.1
1200
2
BTWFX-60
≤6
320
50-2800
60-150
5.5
1.1
1350
3
BTWFX-80
≤8
320
50-2800
60-150
5.5
1.5
1500
4
BTWFX-100
≤10
400
50-2800
60-150
7.5
1.5
1900
5
BTWFX-120
≤12
400
50-2800
60-150
7.5
1.5
2100
FAQ
A:Â Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
Q: Are you a factory ?Â
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q:Â Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.      Â
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.Â
Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement. Â Â
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3Â Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.Â
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
5.Work Shop View:
Â
Introduction:
Eddy current separator, non-ferrous metal separator is mainly used for recycling of non-ferrous metal. Typical material is: wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part ,non-ferrous metal scrap, dross for printing ,broken glass contains non-ferrous .electronic wastes etc.
The main structure is consisted of five parts ,which are permanent roller parts, conveying belt transfer device, vibration feeder, material taker and machine frame( High grade magnetic roller is available if necessary)
Feature:
1.with high efficiency ,stable working structure ,light frame.
2.with high adaptability, great processing capacity
3.It is widely used in environmental-protection area, especially in the non-ferrite recycle field
4Convenient operation and run for a long time .
5the speed of belt and the rotation speed of high frequency magnetic roller are both adjustable.
 Technical Parameters
NO.
Model
Capacity
(m³/h)Diameter of
 the separator roller   Â
 (mm)Speed of the
 separation rollerÂ
(r/min)Drum
 speedÂ
(r/min)Driving Power
(kw)Weigh
(kg)
Separator roller
Belt speed
1
BTWFX-40
≤4
320
50-2800
60-150
4
1.1
1200
2
BTWFX-60
≤6
320
50-2800
60-150
5.5
1.1
1350
3
BTWFX-80
≤8
320
50-2800
60-150
5.5
1.5
1500
4
BTWFX-100
≤10
400
50-2800
60-150
7.5
1.5
1900
5
BTWFX-120
≤12
400
50-2800
60-150
7.5
1.5
2100
FAQ
A:Â Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
Q: Are you a factory ?Â
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q:Â Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.      Â
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.Â
Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement. Â Â
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3Â Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.Â
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
5.Work Shop View:
Â
Raw material
PPGI or GI
Material thickness range
0.2-0.8mm
Rollers
18 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and mateiral
76mm, material is 40Cr
Material of cutting blade
Cr12 mould steel with quenched treatment
Forming speed
12-15m/min(excluding cutting stoping time)
Main motor power
4 KW
Hydraulic station power
3KW
Mode of cutting
Hydraulic cutting or flying saw cutting or mould cutting
Control system
PLC Frequency Control System with touch screen
Working process:
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Eddy Current Magnetic Separator for Metal Separation/Tin Ore/Metal Mixed Solid Waste/Aluminum and Copper Separating
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Customized
Customized: Customized
Condition: New
Dimension: Customized
Capacity: 0.05~250 Tph
After-Sales Service: Engineers Available Overseas
Installation: Engineers Guide
Application: Ore Magnetic Separation
Magnetic Intensity: High Intensity
Trademark: BAITE
Transport Package: Polywood and Steel Frame
Specification: stainless steel
Origin: China
HS Code: 84741000
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Customized
Customized: Customized
Condition: New
Dimension: Customized
Capacity: 0.05~250 Tph
After-Sales Service: Engineers Available Overseas
Installation: Engineers Guide
Application: Ore Magnetic Separation
Magnetic Intensity: High Intensity
Trademark: BAITE
Transport Package: Polywood and Steel Frame
Specification: stainless steel
Origin: China
HS Code: 84741000
Introduction: