2X Series Oil Type Rotary Vane Vacuum Pump

Model NO.: 2X
Origin: Shanghai, China
HS Code: 8414100090
Model NO.: 2X
Origin: Shanghai, China
HS Code: 8414100090
Application
2X Sliding Vane Rotary Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed		 4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure		 ≤ 6× 10 -2
(kw)
Motor Power		 0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise		 ≤ 4 Degrees C
dB(A)
LW Noise		 ≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter		 Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed		 450 550 320 320 450 420
(L)
Injection Amount of Oil		 0.7 0.9 2 2.8 2 4.2
(cm)
Size		 55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight		 54 70 135 196 240 428
Application
2X Sliding Vane Rotary Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed		 4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure		 ≤ 6× 10 -2
(kw)
Motor Power		 0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise		 ≤ 4 Degrees C
dB(A)
LW Noise		 ≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter		 Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed		 450 550 320 320 450 420
(L)
Injection Amount of Oil		 0.7 0.9 2 2.8 2 4.2
(cm)
Size		 55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight		 54 70 135 196 240 428

Brake Parts Cleaner

Automobile Brake Cleaner Spray is a cleaning agent in Lidi's Car Care Spray series.Brake Pad Cleaner Spray is a special cleaning agent for cleaning and cleaning automobile brake discs and brake parts.


Brake Parts Cleaner Feature:
1. It can effectively remove metal shavings, oil stains and dust on brake parts, and keep the brake discs in good heat dissipation.
2. It can eliminate noise and brake vibration, improve braking performance and ensure driving safety.
3. It can also promote uniform braking and prevent the production of asbestos powder. It is a good helper for car brake disc maintenance and maintenance.
4. Spray directly onto clean parts. Dry the part, taking care to protect the paint when spraying.


How to clean the brake system?
1. Observe what kind of braking system the car uses.
2. Remove the wheel.
3. Observe whether there is rust around the brake disc and hub.
4.Remove the brake pump, brake disc and brake caliper.
5.Clean the surface and periphery of the brake disc.
6. Clean the brake pads, the inside of the brake caliper and the inside of the brake cylinder.

7. Clean end effect

8. Installation and Recovery

9. Put the tire back in place (test that the brake system is working properly).


Caution:
1. Keep away from Children;
2. Operate in ventilated place;
3. Store the product in the place under 40 centigrade;
4. Don't put it in the car and keep away from heat and fire.

Brake Parts Cleaner,Brake Pad Cleaner Spray,Brake Cleaner Spray,Disc Brake Cleaner

Guangzhou Lidi Automobile Supplies Co., Ltd. , https://www.lambosscn.com