Extruded Denitrification Extruded Activated Carbon Extruded Denitrification Extruded Activated Carbon,Industrial Activated Carbon,Impregnated Activated Carbon,Denitrification Activated Carbon Shanxi Xinhui Activated Carbon Co.,Ltd. , https://www.shanxixinhuicarbon.com
2. Pricing of antique furniture The value orientation of antique furniture is mainly based on “age, material, rarity, integrity, and appearance of stylingâ€. Hardwood rosewood and yellow pear furniture can be sold at astronomical prices. Therefore, people who are keen on antique furniture may wish to refer to the styles of rosewood and huanghuali furniture, and choose the furniture for softwood materials.
3. The processing of antique furniture is a necessary process for rejuvenation of antique furniture. The precision of processing can be seen from the following: The finishing of drawer bottoms, the fineness of grinding, the uniformity of painting, and the graininess Whether it is complete, whether the drapes on the back of the cabinet are in good condition, etc., are all areas that need attention.
4, the maintenance of antique furniture
a. To prevent water from being cracked, for example, regardless of whether the weather is hot or cold, place a cloth under the cup and wipe off the water stains immediately. Usually, as long as it is used normally, there is no need to worry too much. In overheated rooms where heating is used during the winter, it is best to use a humidifier at the same time to allow the furniture to crack.
b. Always wax and clean No matter whether hardwood or softwood can be directly exposed to sunlight or wipe with a damp cloth. Because long-term sunlight exposure will cause cracking and fading of wood, while wet cloth is easily stained with dust on the antique furniture surface caused by wear and tear, even if it will be worn out carved it regretted!
When cleaning, it is best to use a bristle brush to gently brush the dust, and then wipe it with a dry cloth until it is completely dust-free. The carved part can be lightly brushed with a brush, and then selected by water wax, bright wax, beeswax, etc. Wax for maintenance.
When waxing, use a clean cotton cloth to dip the wax, apply light and heavy force slowly, and gradually push it away from the surface, until the wax is stable and evenly attached to it, and the wood grain can be clearly visible, usually every six months Wax once. Because antiques are usually covered with a layer of clear lacquer to cut off the air, thick wax oil is not good for furniture, but diligently scrubbing dust is the best way to avoid sanding.
c. Note the difference between soft and hard. In general, the antique furniture bought by the consumers should have been preserved by a professional antique restoration master. The improper handling of precious antique furniture may cause a lack of skill, so the proposal is too complicated. The maintenance work is still handed over to professionals. Therefore, the main treatment at home is still daily cleaning, waxing and other work.
Due to the fact that antique furniture is the largest wood species, wood species can be divided into two types, softwood and hardwood. After most of the wooden furniture is treated with raw lacquer, softwood furniture is protected by a layer of paint. As for hardwood furniture, the above wax is used for maintenance, and the wood itself is beautifully textured.
China Engineering Decoration First Portal Website Decoration Network
Maintenance and purchase of antique furniture
1, the purchase and maintenance of antique furniture Antique furniture can be divided into "cork" and "hardwood" two categories. Hardwood has higher density, finer texture, and heavier quality, so hardwood is more valuable than softwood. Rosewood and pear are very expensive. Cork is made of nanmu, eucalyptus, eucalyptus, cypress, eucalyptus, Chinese fir, white wood, eucalyptus, and so on.