Not long ago, after more than a year of research and development, the second-generation medicinal material drying machine was successfully produced at the county's Jinfeng Machinery Plant, indicating that the plant has taken another step forward in the field of dryers. In recent years, Jinfeng Machinery Factory has been committed to the research and development of herbal medicine dryers. Since the first herbal medicine dryer was introduced in 2010, the products have been gradually upgraded. At present, its products have already gained popularity in the province. According to Chen Liang, general manager of Jinfeng Machinery Plant, the factory was founded by his father Chen Sikai. The harvester was produced in his early years, and later he mainly produced gasifiers, among which the gasifier won the County Science and Technology Progress Award. In the 90s of last century, the plant produced a dryer, which was mainly used for drying edible mushrooms. In 2001, after graduating from Jinhua Institute of Technology, Chen Liang came to his father factory and has been engaged in the production and operation of mechanical products. After many years of exploration, Chen Liang felt that companies should develop into specialized production. As a result, the father and son decided that the gasifier business will continue to be operated by the Jiufan Machinery Plant, a subsidiary of Jinfeng Machinery Factory. Chen Liang will target the field of medicinal wood dryers for specialized production. Chen Liang said: "In the past, there were many varieties of products in the company. Many of the products in the machinery industry were carried out. It was difficult to do fine and strong because of too many kinds of products." Since 2010, Jinfeng Machinery Factory has begun targeting drug drying. Machine, has been producing such products. By the end of this year, the first-generation dryers had introduced four models, the smallest one capable of baking 300 kilograms of medicinal materials and the largest one capable of drying 1.2 tons. “The introduction of herbal medicine dryers is suitable for our country's efforts to promote sulphur-free processing of Chinese herbal medicines. It can be said that we have responded to the trend of herbal medicine processing and development. In recent years, the sales volume of dryers has been increasing year by year.†Chen Liang introduced that the sales volume reached more than 60 years last year. Taiwan, this year has more than 80 units, sales area mainly in Zhejiang Province, while sold to Anhui, Guizhou and other places. Xinyi is the main producing area of ​​medicinal materials in my county and is also the location of Zhejiang Bawei Market. The large purchasers and purchasers of medicinal materials purchase more, and Chen Liang often communicates with them and after-sales service is in place. There is a problem in the use of the customer, he will rush over to help solve it. "If there are two problems with the same model of equipment, I will not let it appear for the third time." Chen Liang said. In the exchanges with drug farmers and drug dealers, Chen Liang felt that it was necessary to upgrade the original dryer. Since last year, he embarked on the design of a new generation of medicinal material dryers. He encountered technical difficulties in research and development. He went to colleges and universities to visit experts and professors. “I often wake up in the morning and a new solution will appear in my mind.†Chen Liang’s R&D products can be said to be full of dedication, and sometimes she dreams of some technical problems. Through continuous efforts, the second-generation herbal medicine dryer has finally been successfully trial-produced. Subsequently, he invited a number of drug farmers to conduct drying experiments, which generally reflected good results. The second-generation dryer has the advantages of small work intensity, uniform heating, large capacity, and wider use. “The original dryer had to turn over the medicinal materials during the operation and required three people to operate. Now it is an assembly line operation that requires no turning; the minimum number of disposable medicinal materials is 1.5 tons, and the maximum is 2.4 tons; due to the inside of the hot air flow. The cycle has achieved the effect of saving energy and shortening the drying time." For the new product, Chen Liang is quite satisfied. At present, there are many large purchases and sales of medicinal materials and Jinfeng Machinery Plant has reached the second generation of dryer purchase intent. Chen Liang said that specialization is the direction of the development of the enterprise, only the professional ability to do fine products to do fine, in the future, Jinfeng Machinery Factory will strive to do a better medicine dryer products. First, the unlocking method is to use a two-dimensional code to open, whether it supports other unlocking methods, such as mechanical keys or cards or fingerprints, these can be negotiated with us. Qr Code Lock,Door Locks Qr Code,Qr Code Hotel Door Lock,Qr Code Smart Door Lock Dongguan Kaisijin Intelligent Technology Co., Ltd , https://www.dgoemsmartlock.com
Second, convenience. It`s easy to lose keys and proximity cards. It`s troublesome to go out for a run, but mobile phones have become as important as our organs. When we use our mobile phones to get the QR code to open the door, we won`t lose them. Open it directly and swipe the door very convenient. If you share the key with your friends, you can set the number of unlocking times, the time limit for unlocking, etc. Anyway, who can open it and how long it will last is all up to you. No more silly going downstairs to pick up guests.
The third is to facilitate management. Its software has functions such as key sharing, management, access control record viewing, and role unlocking authority. It is suitable for places such as hotel apartments that require strict management of a large number of entrance guards and rooms.