150LB/300LB/600LB/900LB Stainless Steel Reduced Bore Fully Welded Ball Valve (GARQ61PPL)

Model NO.: GARQ61PPL
Type: Floating Ball Valve
Function: Bypass-Valve
Temperature: Normal Temperature
Application: Industrial Usage
Trademark: GOOLE, OEM
Origin: China(Mainland)
HS Code: 8481804090
Model NO.: GARQ61PPL
Type: Floating Ball Valve
Function: Bypass-Valve
Temperature: Normal Temperature
Application: Industrial Usage
Trademark: GOOLE, OEM
Origin: China(Mainland)
HS Code: 8481804090
Application:
 
City Gas:gas outlet pipe,supply pipe for main line and all brach lines etc.
District heat supply:Outlet pipe,main line and brach line for large heat supply equipment.
Heat exchanger:on-off of pipe and all loops.
Steel plant:various fluid pipes,discharging pipe for exaust gas,supply pipe for gas,thermal power and fuel.
Various industrial equipment:various heat treatment pipes,pipe for all kinds of industrial gas and thermal power.
 
Features:
 
  1. Outer leakage won't occur for welded ball valve.
Valve seat consists of teflon sealing ring strengthened by carbon fiber and belleville spring,so it can adjust well to change on pressure and temperature without any leakage risk within marked pressure and temperature range.
  1. The whole process of sphere is tracked and detected with advanced computer and detector,so the process precision is very high,operation is very simple and easy,no bad interference.
  2. Body material is same as material of pipe,when vehicles pass through the groud or even earthquake happens,the stress is evenly distributed without any deformation risk.
  3. Sealing ring is made of PTFE containling 20% carbon,Ensure no leakage will happen.
  4. Buried ground fully welded ball valve can be installed in small and shallow well being set on ground rather than large valve well,so the construction cost and project time can be saved a lot.
  5. The length of valve body and height of stem can be designed in accordance with the requirement of project.
  6. The service life can be more than 15 years when used at normal operational and using conditions.

Brief Introduction:
Full welded ball valve is a new develped ball valve,compared with ordinary ball valves,its performance is more reliable and has much longer service life,it has a wide application in the following industrial field :
 
  1. Urban Gas Supply:Main and distribution pipelines.
  2. Urban Central Heat Supply:Main and distribution pipelines.
  3. Heat Exchanger.
  4. Steel Factory:Pipelines for discharging waste gas,supplying coal gas and heat,etc.
  5. Industrial Equipment:heat treatment pipelines,gas pipelines and thermal pipelines.
 
Construction Features:
1.Floating Ball/Trunnion Mounted.
2.Full bore/Reduced port.
3.Metal seal/Soft seal.
4.Fire Safe Design; Anti-static device; Blow-out proof stem.
5.Belleville spring ensure no leakage. 
  
Product Rang:
Pressure Rating:150-600lb,1.6-4.0 Mpa
Connecting Size:1/2"-40",DN15-1000mm.
Connecting type:Thread,Welding,Flange,etc.
Applicable Temp(ºC):-19-150.
Applicable Medium:Water,Oil,Natural gas,etc.
Operating Mode:Lever,Gear,Electric,Pneumatic,etc.
 
Material Available:
Body: ST37.8 / A105 / LF2 / F304 / F316. Etc.
Ball : F304 / F316 ( Option upon request )
Seat: PTFE+C / Nylon / PEEK. Etc.
 
Main Parts and Materials.
No. Part Name Part Material
1-1. Welding end Steel St 37.0
1-2. Female end Steel St 52/St 37.0
1-3. Flange Steel R St 37-2
2. Belleville spring 65 Mn
3. Body Steel St 37.0
4. Ball CF8
5. Seat PTFE,20% C
6. Back-up ring 2Cr13
7. Friction packing PTFE,20% C
8. O-ring Viton
9. O-ring EPDM
10. Gasket St 37.0
11. Pin Steel
12. Stem nut Steel
13. Back-up ring PTFE,20% C
14. Stem guide Steel St 52
15. Stem 2Cr13
16. Handle Steel

Main External Dimensions.

150LB/300LB/600LB/900LB Stainless Steel Reduced Bore Fully Welded Ball Valve (GARQ61PPL)
 
Size A B L D D1 D2
in mm mm mm mm mm mm mm
1/2 15 129 64 210 15 21.3 42
3/4 20 129 64 230 15 26.7 42
1 25 159 76 230 20 33.4 48
1 1/4 32 159 85 260 25 42.2 60
1 1/2 40 230 95 300 32 48.3 76
2 50 230 100 300 40 60.3 89
2 1/2 65 300 159 300 50 76.1 114
3 80 300 170 300 65 88.9 140
4 100 450 192 325 80 114.3 185
5 125 450 208 325 100 141.3 216
6 150 450 241 350 125 168.3 219
Application:
 
City Gas:gas outlet pipe,supply pipe for main line and all brach lines etc.
District heat supply:Outlet pipe,main line and brach line for large heat supply equipment.
Heat exchanger:on-off of pipe and all loops.
Steel plant:various fluid pipes,discharging pipe for exaust gas,supply pipe for gas,thermal power and fuel.
Various industrial equipment:various heat treatment pipes,pipe for all kinds of industrial gas and thermal power.
 
Features:
 
  1. Outer leakage won't occur for welded ball valve.
Valve seat consists of teflon sealing ring strengthened by carbon fiber and belleville spring,so it can adjust well to change on pressure and temperature without any leakage risk within marked pressure and temperature range.
  1. The whole process of sphere is tracked and detected with advanced computer and detector,so the process precision is very high,operation is very simple and easy,no bad interference.
  2. Body material is same as material of pipe,when vehicles pass through the groud or even earthquake happens,the stress is evenly distributed without any deformation risk.
  3. Sealing ring is made of PTFE containling 20% carbon,Ensure no leakage will happen.
  4. Buried ground fully welded ball valve can be installed in small and shallow well being set on ground rather than large valve well,so the construction cost and project time can be saved a lot.
  5. The length of valve body and height of stem can be designed in accordance with the requirement of project.
  6. The service life can be more than 15 years when used at normal operational and using conditions.

Brief Introduction:
Full welded ball valve is a new develped ball valve,compared with ordinary ball valves,its performance is more reliable and has much longer service life,it has a wide application in the following industrial field :
 
  1. Urban Gas Supply:Main and distribution pipelines.
  2. Urban Central Heat Supply:Main and distribution pipelines.
  3. Heat Exchanger.
  4. Steel Factory:Pipelines for discharging waste gas,supplying coal gas and heat,etc.
  5. Industrial Equipment:heat treatment pipelines,gas pipelines and thermal pipelines.
 
Construction Features:
1.Floating Ball/Trunnion Mounted.
2.Full bore/Reduced port.
3.Metal seal/Soft seal.
4.Fire Safe Design; Anti-static device; Blow-out proof stem.
5.Belleville spring ensure no leakage. 
  
Product Rang:
Pressure Rating:150-600lb,1.6-4.0 Mpa
Connecting Size:1/2"-40",DN15-1000mm.
Connecting type:Thread,Welding,Flange,etc.
Applicable Temp(ºC):-19-150.
Applicable Medium:Water,Oil,Natural gas,etc.
Operating Mode:Lever,Gear,Electric,Pneumatic,etc.
 
Material Available:
Body: ST37.8 / A105 / LF2 / F304 / F316. Etc.
Ball : F304 / F316 ( Option upon request )
Seat: PTFE+C / Nylon / PEEK. Etc.
 
Main Parts and Materials.
No. Part Name Part Material
1-1. Welding end Steel St 37.0
1-2. Female end Steel St 52/St 37.0
1-3. Flange Steel R St 37-2
2. Belleville spring 65 Mn
3. Body Steel St 37.0
4. Ball CF8
5. Seat PTFE,20% C
6. Back-up ring 2Cr13
7. Friction packing PTFE,20% C
8. O-ring Viton
9. O-ring EPDM
10. Gasket St 37.0
11. Pin Steel
12. Stem nut Steel
13. Back-up ring PTFE,20% C
14. Stem guide Steel St 52
15. Stem 2Cr13
16. Handle Steel

Main External Dimensions.

150LB/300LB/600LB/900LB Stainless Steel Reduced Bore Fully Welded Ball Valve (GARQ61PPL)
 
Size A B L D D1 D2
in mm mm mm mm mm mm mm
1/2 15 129 64 210 15 21.3 42
3/4 20 129 64 230 15 26.7 42
1 25 159 76 230 20 33.4 48
1 1/4 32 159 85 260 25 42.2 60
1 1/2 40 230 95 300 32 48.3 76
2 50 230 100 300 40 60.3 89
2 1/2 65 300 159 300 50 76.1 114
3 80 300 170 300 65 88.9 140
4 100 450 192 325 80 114.3 185
5 125 450 208 325 100 141.3 216
6PVC Ceiling Panel Machine

PVC Ceiling Panel Machine is used to produce PVC ceiling wall panel with different size, such as 200mm, 250m,300mm, 400mm, 600mm and so on. it is beglon to plastic extruder, used for Plastic Profile Extrusion Machine

Production flow of PVC ceiling production line:

Material batching mixing-extruding-molding-vacuum calibrating and cooling-hauling-cutting- final PVC ceiling

Surface treating ways:

hot stamp printing

high glossy printing

lamination by decoration film

The basic machines needed for production of PVC ceiling wall panel:

PVC Mixer

PVC panel extrusion line

(Including autoloader, conical twin screw extruder, mould, vacuum calibration chamber, hauling machine, auto cutter- stacker)

hot stamp printer or two color printing line or lamination

PVC pipe crusher& PVC miller

Air compressor

- Water chiller (optional)

- high glossy two color PVC ceiling wall panel printing line

Production flow of PVC ceiling production line:

Material batching mixing-extruding-molding-vacuum calibrating and cooling-hauling-cutting- final PVC ceiling

Surface treating ways:

hot stamp printing

high glossy printing

- lamination by decoration film


The basic machines needed for production of PVC ceiling wall panel:

PVC mixer

PVC panel extrusion line

(Including autoloader, conical twin screw extruder, mould, vacuum calibration chamber, hauling machine, auto cutter- stacker)

hot stamp printer or two color printing line or lamination

PVC pipe crusher& PVC miller

Air compressor

Water chiller (optional)

high glossy two color PVC ceiling wall panel printing line

Pvc Ceiling Panel Machine,Pvc Ceiling Machine,Pvc Ceiling Making Machine, pvc ceiling extrusion line

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com