Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

Model NO.: MFS-250
Voltage: 340-480V
Power(Kw): 250kw
Principle: Mixing Heat Exchanger
Structure Material: Metal Material
Core: Core Evaporative Heat Exchanger
Ceramic Heating Equipment Type: Ceramic Electric Heater
Recuperative Heat Exchanger Type: Tube Type Heat Exchanger
Application: Heater
Trademark: YUELON
Transport Package: Standard Wooden Case
Specification: CE
Origin: Zhejiang
HS Code: 8514400090
Model NO.: MFS-250
Voltage: 340-480V
Power(Kw): 250kw
Principle: Mixing Heat Exchanger
Structure Material: Metal Material
Core: Core Evaporative Heat Exchanger
Ceramic Heating Equipment Type: Ceramic Electric Heater
Recuperative Heat Exchanger Type: Tube Type Heat Exchanger
Application: Heater
Trademark: YUELON
Transport Package: Standard Wooden Case
Specification: CE
Origin: Zhejiang
HS Code: 8514400090
Models: MFS-200
Rated output power: 200kw
Frequency rage: 0.5-10KHz
Input current: 330A
Input voltage: 3Phase 380V50Hz
Duty cycle: 100%
Water flow: 10-20m3/h
Weight: 230KG
Dimension: 820×780×1800mm

Features:

1. IGBT inversion technology based LC series circuit .
2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency 
tracking automatically.
3. diode rectifier cause high power factor more than 0.95
4. working continuously with 100% duty cycle, power can be instantly turned on or shut off.
5. perfect protective circuit and cooling system design, which ensure the good reliability of machine.
6. low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy 
saving 15%-30% compared with SCR induction heating machine. 
7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees 
by eliminating smoke, waste heat, noxious emissions and loud noise.
8. operating and installation easily and safely
9. can substitute traditional heating methods.
 

Application of medium frequency induction machine:

A. Heating (hot forging, hot fitting and smelting):
1 Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.

2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting, for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.

3. Smelting mainly aims to melt the metal into liquid by using the high temperature, which is mainly applicable to the smelting of iron, steel, copper, aluminum, zinc as well as various noble metals.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2. Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quench for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

C. Welding (braze welding, silver soldering and brazing)
It mainly aims to melt the solder by heating it to a certain temperature for the purpose of connecting two types of metals of the same material or different materials.

1. Welding of various hardware cutting tools, such as diamond tool, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit.
2. Welding of various hardware mechanical gadget: Silver soldering and brazing of metals of the same variety or different varieties, such as hardware toilet and kitchen products, refrigerating copper fitting, lamp decoration fitting, precision mold fitting, hardware handle, eggbeater, alloy steel and steel, steel and copper as well as copper and copper.

3. Compound pot bottom welding is mainly applicable to the braze welding of circular, square as well as other irregular plain pot bottom. It is also applicable to plain braze welding of other metals.
4. Welding of heating disc of electric hot-water kettle mainly refers to the braze welding of stainless steel flat base, aluminum sheet and tubular electric heating elements of various forms.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

D. Annealing (tempering and modulation):
1. Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)


We offer complete service : 

Before sales
Our professional technical recommend the right machine,and can also customise special machine as customer's requirement and special parts.
 
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
 
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine. Provide long-terms technical support.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

Certifications

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

  Models: MFS-200
Rated output power: 200kw
Frequency rage: 0.5-10KHz
Input current: 330A
Input voltage: 3Phase 380V50Hz
Duty cycle: 100%
Water flow: 10-20m3/h
Weight: 230KG
Dimension: 820×780×1800mm

Features:

1. IGBT inversion technology based LC series circuit .
2. phase locking looping technology and soft switch ensure good reliability, realize power and frequency 
tracking automatically.
3. diode rectifier cause high power factor more than 0.95
4. working continuously with 100% duty cycle, power can be instantly turned on or shut off.
5. perfect protective circuit and cooling system design, which ensure the good reliability of machine.
6. low energy consumption: converts up to 97.5% above of the expended energy into useful heat. energy 
saving 15%-30% compared with SCR induction heating machine. 
7. environment friendly, clean, non-polluting process which will help protect the environment, improves working conditions for your employees 
by eliminating smoke, waste heat, noxious emissions and loud noise.
8. operating and installation easily and safely
9. can substitute traditional heating methods.
 

Application of medium frequency induction machine:

A. Heating (hot forging, hot fitting and smelting):
1 Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.

2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting, for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.

3. Smelting mainly aims to melt the metal into liquid by using the high temperature, which is mainly applicable to the smelting of iron, steel, copper, aluminum, zinc as well as various noble metals.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

B. Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2. Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Various electric tools, such as gear and axes.
4. Quench for machine tools, such as lathe deck and guide rail.
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

C. Welding (braze welding, silver soldering and brazing)
It mainly aims to melt the solder by heating it to a certain temperature for the purpose of connecting two types of metals of the same material or different materials.

1. Welding of various hardware cutting tools, such as diamond tool, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit.
2. Welding of various hardware mechanical gadget: Silver soldering and brazing of metals of the same variety or different varieties, such as hardware toilet and kitchen products, refrigerating copper fitting, lamp decoration fitting, precision mold fitting, hardware handle, eggbeater, alloy steel and steel, steel and copper as well as copper and copper.

3. Compound pot bottom welding is mainly applicable to the braze welding of circular, square as well as other irregular plain pot bottom. It is also applicable to plain braze welding of other metals.
4. Welding of heating disc of electric hot-water kettle mainly refers to the braze welding of stainless steel flat base, aluminum sheet and tubular electric heating elements of various forms.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

D. Annealing (tempering and modulation):
1. Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.
2. Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)


We offer complete service : 

Before sales
Our professional technical recommend the right machine,and can also customise special machine as customer's requirement and special parts.
 
Sales following
During machine production, watching the machine quality and testing machine.and take pictures or make video for customer checking.
 
After Sales
Machine have one year quality warranty ,0ne year free replacement spare parts ( 1 set of spare parts free for your stock, in case it need replacement).
Supply pictures or video help customer to install machine. Provide long-terms technical support.

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

Certifications

Gear Quenching Machine Electromagnetic Induction Heater (MFS-250)

 

5 In 1 Blender

China Electric Processor,Mini Mixer For Home-Used, 5 in 1 Electric Blender Mixer,Mini Blender Mixer, we offered that you can trust. Welcome to do business with us.

Jiangmen Hongyi Electrical Appliance Manufacturing Co., Ltd. is a professional enterprise which aims at producing household electrical appliances. Our company is located in Jiangmen City, Guangdong Province. We are adjacent to Guangzhou, Shenzhen, Macao and Hong Kong. The transportation is very convenient.
Our company has product development, moulsd manufacturing, testing, product manufacturing and other departments. We have a professional team to ensure product quality. We provide quality and high performance products for clients. Our company aims to establish good and stable trade relationships with clients. Our products are exported to Southeast Asia, the Middle East and other countries and regions. We have deeply won consumer's trust.
Our main products are food mixers, blenders, electric fans, electric irons, plastic accessories and hardware.
Our company has consistently adhered to the concept of "outstanding quality, affordable price, excellent service". We hope to strengthen economic cooperation with friends from all over the world and create a bright future together.

Electric Processor,Mini Mixer For Home-Used,5 in1 Electric Blender Mixer,Mini Blender Mixer

Jiangmen HongYi Electrical Appliance Manufacturing CO.LTD , https://www.hongyiappliance.com