Preparation of the rod mill before commissioning

It is very important to prepare the rod mill before commissioning. Let's talk about what needs to be done before the rod mill is tested, so that we can have a reasonable test on the rod mill.

First of all, it is necessary to check the drying and insulation of the motor of the rod mill, and do the test of the motor running.

Carefully check the fastening of all fasteners.

Clean all lubrication parts and oil

Check to see if the seals at each seal meet the quality requirements.

Installation and inspection of various protection devices to determine equipment reliability.

Carry out empty grinding (no medium, no material), check whether the ball mill and other rotating bodies are in contact with or collide with other objects, and whether there is abnormal noise.

The above simply describes the work that needs to be prepared before the rod mill test machine. As long as the rod mill is tested in strict accordance with the above method, it is generally better to detect whether there is a quality problem in the rod mill.

Nozzle Castings

The heat - resistant steel heat treatment furnace components produced by our company are sold throughout the country. During many years of continuous research and development, our company has developed a number of new materials which further meet with the requirements of heat resistant non-scale and non-deformation. Components can be produced from 0.1kg to 1500kg.