Box shear machine is horizontal structure, the equipment is driven by hydraulic pressure. Compared with mechanical shear machine, it has the characteristics of small size, light weight, small inertia, low noise,stable movement, flexible operation and large shear section. With the integrated control of hydraulic and electronics, single and continuous action conversion can be implemented, which is simple and convenient to use. In shearing, the material cut does not need manual support, as long as according to the shearing speed, the shearing material can be continuously added to the equipment bin.
1) Independent research and development, independent brand, mature technology.
2) Imported accessories, lower operating costs, higher quality, energy-saving and efficient.
3) Fully enclosed structure, high safety performance, low probability of work-related injuries.
4) Car-mounted mobile customization to meet the needs of changing sites.
5) Integrated installation-free, ready-to-use.
6) PLC control, manual automatic operation, automation free of manual work.
7) Electric power system and diesel system should be operated in a two-pronged way.
8) Cyclic design, long working hours, low human capital requirements.
9) Wide range of application, less restrictions on material delivery, high safety performance.
10) Independent design, long service life, high shear force.
Horizontal Shear, Horizontal Shearing Machine, Container Shear, Horizontal Metal Shear, Horizontal Scrap Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-briquetter.com
In June 2011, a total of approximately 151,400 micro-customers were sold nationwide, a decrease of 5.4% from the previous quarter and a decrease of 21.17% year-on-year. In the first half of 2011, China sold a total of 1,204,700 micro-customers, a cumulative decrease of 9.87% over the same period of 2010.
Of the 16 micro-producer companies included in the statistics of the China Association of Automobile Manufacturers, in the first half of 2011, only Dongfeng Motor Corporation, China FAW Group Corporation, Jinbei Automobile Co., Ltd., Chongqing Lifan Automobile Co., Ltd. and Guizhou Aerospace Automotive Co., Ltd. successfully The sales volume of five companies in the company achieved year-on-year growth, with an increase of 49.31%, 11.19%, 9.22%, 553.99%, and 51.21%, respectively.
Among several companies, Dongfeng Xiaokang has a large number of bases, rapid growth, and the most eye-catching performance, while the successful high growth of Chongqing Lifan and Guizhou Aerospace is mainly due to the small base. The sales of the two vehicles in the first half of 2010 were only 1,480 units and 1,365 units respectively. It is worth noting that the sales volume of Jinbei Auto in June increased by 8.2% and 73.65% year-on-year, and the rebound momentum was fiercer.
In addition to the above five companies, the sales of the remaining micro-enterprises in the first half of 2011 all showed declines in varying degrees. The market of SAIC-GM-Wuling in the micro-vehicle industry was relatively stable, with a total of 570,000 micro-sales sold in the first six months, down 3.17% from the same period of 2010, which was lower than the average decline in the industry, and sales continued to rank first in the industry. The market share increased from 43.99% in the same period in 2010 to 47.26%.
In the first half of 2011, Changan Automobile (excluding Hafei Motors and Changhe Automobile) and Dongfeng Motor Company continued to occupy the second and third position of micro-customer sales, with sales of 303,100 units and 143,300 units respectively. Hafei Automobile, FAW Group, Haima Commercial Vehicle Co., Ltd., Changhe Automobile, Jinbei Automobile and Chery Automobile sold a total of 47,400, 32,900, 26,000, 24,200, and 22,400 micro-customers and 1.97 in the first half of 2011, respectively. Million, ranking 4-9.