Turbocharged engines with the "T" logo have been widely used in major car brands. The car with a turbocharged engine is very good, and because the current technology is very mature, it can keep the engine longer. Of course, the daily maintenance of the turbocharged engine is also very careful. 1. Check the health of each component The performance of a turbocharged engine is relatively strong, but there are some conditions in use. Due to the large number of components in the turbocharged engine, always pay attention to whether the turbocharger has abnormal noise or unusual vibration, check whether the sealing ring is well sealed, and whether the lubricating oil pipe and the joint are leaking. 2. Check the oil The turbomachined engine has high machining precision and strict assembly technical requirements. In selecting the oil, the characteristics of the engine must also be taken into consideration. The role of the turbocharger is to greatly improve the mass and volume of the air entering the combustion chamber. The engine structure is more compact and more reasonable, and the higher compression ratio makes the engine work more powerful. The oil used must have good abrasion resistance, high temperature resistance, fast lubricant film formation, high oil film strength and good stability. In addition to the original engine oil, the engine oil can also be used with high-quality lubricants such as synthetic motor oil and semi-synthetic engine oil. In addition, the oil filter should be carefully checked to prevent impurities from entering the engine interior. 3. Cleaning Turbine engines are characterized by high power and low fuel consumption, which are based on their sophisticated design and manufacturing process, and also determine its harsh working environment. Therefore, it has a very high requirement for the cleaning and protection of lubricating oil, and the friction damage of any impurities and components is very large. So cleaning the engine is very important. Usually drive to develop good habits There are some precautions when using a turbocharged engine. For example, if the cold car starts, it should be slow, and if the hot car is idle, it will be turned off again. It takes a few minutes to warm up when the cold car starts. The role of preheating is to fully lubricate the turbocharger. This is especially important in winter when the lubrication of the oil is completed and the engine is running at high speed. After the turbocharged engine runs at high speed for a long time, after the engine is suddenly turned off, the temperature of the exhaust manifold is high, and the heat is absorbed into the turbocharger casing, so that the oil staying inside the supercharger is broken. Carbon deposits. Therefore, the engine is idling for several tens of seconds before the engine is turned off, and the turbocharger rotor speed is lowered. The engine has a crucial impact on the performance of the vehicle. When driving normally, everyone should develop a good driving habit. If there is any abnormal situation and do not understand the reason, be sure to check it at a professional repair shop. Turbocharged engine maintenance, here is the introduction, thank you for your attention. About baby bib:
The mothers have common perplex that they worry the baby get dirt on clothes when they have meal.What can we do to avoid that? Many mothers will buy baby bib! However, the baby bib which is made of cloth is easy to get dirty and difficult to clean! Can we solve this problem ? Absolutely yes! Silicone baby bibs are not only can help you avoid dirty problems when they have meal, but also easy to clean! Why? Because the silicone material is smooth and waterproof, more important , it can dry quickly which save you a lot of time. So, when mothers choose to buy a baby bib, most of them choose the silicone one!
Product discription:
Baby Bibs Silicone,Silicone Bibs For Children,Waterproof Silicone Baby Bibs,Food Grade Silicone Baby Bibs,Silicone Baby Feeding Bibs Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconemolds.com
1.Product name:Baby bibs silicone,Silicone bibs for children,Waterproof silicone baby bibs,Food grade silicone baby bibs,Silicone baby feeding bibs,Silicone baby bibs with pocket
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Logo:Printing,debossed,embossed
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Use in baby meal
10.Silicone baby bibs photos for reference.
