Engine Parts Im3039 Starter Armature

Engine parts IM3039 Starter Armature

OE NO.	IM3039
Volt	Dim	O.d	Front	Rear	Splines	Slot
12V	170	53.7	10.0Â	9.0Â	13T	23
Replacing	F4PU1100AB  F4TZ11005A SM461 F004PU1100AB F4PU1100AB
Servicing	M8T50071  M8T50171
Application	MITSUBISHI / DELCO / FORD

Yancheng Shunyu
supply Starter Armature for Mitsubishi,Nippondenso,Hitachi,Delco,Sawafuji,Bosch etc series,

the armature is manufactured based on OE NO. or sample which is provided by customer.

Our factory insists on Quality First and produces the high-quality armatures for our customer with good service . Hope we will have win-win cooperation in the future.

 

Shunyu other models Starter Armature reference

 

 

 

 

 

Engine parts IM3039 Starter Armature

OE NO.	IM3039
Volt	Dim	O.d	Front	Rear	Splines	Slot
12V	170	53.7	10.0Â	9.0Â	13T	23
Replacing	F4PU1100AB  F4TZ11005A SM461 F004PU1100AB F4PU1100AB
Servicing	M8T50071  M8T50171
Application	MITSUBISHI / DELCO / FORD

Yancheng Shunyu
supply Starter Armature for Mitsubishi,Nippondenso,Hitachi,Delco,Sawafuji,Bosch etc series,

the armature is manufactured based on OE NO. or sample which is provided by customer.

Our factory insists on Quality First and produces the high-quality armatures for our customer with good service . Hope we will have win-win cooperation in the future.

 

Shunyu other models Starter Armature reference

 

 

 

 

 

Combined Flow Closed Cooling Tower

Closed Cooling Tower is operated by circulating water or fluid, which is divided into two closed loops.

1. Circulation in the tower: the circulating water or fluid passes through the hot zone environment. After the water temperature rises, it enters the surface cooler in the tower, and the heat is sent to the environment outside the tower through the surface cooler and ventilation fan. The cooled circulating water or fluid is sent to the heat source by the water pump.

2. Circulation outside the tower: the spray water is sent to the spray system by the water tank through the water pipe. After spraying, the spray water first exchanges heat with the filler, so that the spray water can be cooled rapidly. At this time, the water contacts the surface of the surface cooler for heat exchange. Part of the hot steam is discharged through the ventilation fan, and the cooled spray water drops to the water tank for secondary circulation to form an external circulation for cooling.

Combined Flow Closed Cooling Tower,Bac Cooling Tower,Cooling Tower Systems,Chiller Tower

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com