Foshan Kobo Lighting CO.,LTD. , https://www.lightsattack.com
Length of structure: API 6D/ASME B16.10. For product beyond the scope of the standard, it shall be manufactured by specifications in Fangyuan standard or user's requirements.
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25/ ASME B31.8
Wall thickness: ASME B16.34
Fireproof test: API 607/API 6FA
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
Product scope: NPS 1-1/2″~NPS 60″, CL150~CL2500
Main body material: A105LF2etc.
Valve seat material: PTFE RPTFE NYLON DEVLON Derlin PEEK PPL HNBR FKM etc.
Drive device: Handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
Ordering Information
Users should be based on the products listed in this catalog to select and place order. As otherwise required or on the following changes should be stated in the contract.
1. Product type and valve specifications DN
2. The valve pressure rating (Metric with nominal pressure PN, Anglo- American system on LB, the Japanese system of K-level)
3. The valve structure length performance standards
4. Connecting flange standards and seal form
5. Weld end dimension implementation standards and pipe No.
6. Requirement of gear operator (including transfer mode and its arrangement mode)
7. Requirement of electric actuator(including model and its transmission torque)
8. The main material (including body, bonnet, trim and fasteners)
9. Temperature º C
10. Medium
11. Sealing vice materials' matching
12. Requirements of fire protection, anti-static and fire-resistant
13. Greasing or sewage and venting required
14. The other statement(such as structural features, application specification, flaw detection, etc. )
Installation and maintenance instructions
1. Valves should be stored in dry and ventilated room, the channel to be blocked at both ends;
2. Valves must be turned off during the suspension period and the storage, to ensure in good seal condition;
3. Valves should be checked carefully on the models, specifications and technical performance and ensure its according with the requirements before installation, also make clear the valve cavity and the appearance of dirt, sediment and rust;
4. The opening and closing should be turned by handwheel, not the help of other auxiliary lever;
5. This valve should be kept clean during using, and the stem threaded portion should be regularl
Â
Â
Â
Design standard: API 6D
Length of structure: API 6D/ASME B16.10.
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25/ ASME B31.8
Fireproof test: API 607/API 6FA
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
Product scope: NPS 1-1/2″~NPS 60″, CL150~CL2500
Main body material: WCB, LCB, WCC, CF8, CF8M, etc.
Valve seat material: PTFE, RPTFE, NYLON, DEVLON, , PEEK, etc.
Drive device: Handle, worm wheel, electric, pneumatic, etc.
Main Feature
Urgent grease injection device
According to customer s' requirement, the trunnion ball valves made by our company are provided with devices for urgent grease injection, which are on both the stem and seat for the trunnion ball valves of DN >150mm (NPS), and in the body cavity for the valve of DN < 125mm. When the O ring of stem or the body seat ring is damaged due to accident, the medium leakage between body and stem can be prevented by injecting the sealing grease through the device.
Double-block and bleed functions
In general, our company's trunnion ball valve features the front ball sealing design structure. Each seat of the ball valve can separately cut off the medium at both inlet and outlet of the valve to realize double-block functions. When the ball valve is closed, body cavity and two of the body ends can be blocked with each other even if both the inlet and outlet are under pressure, when the medium left in the body cavity might be bled through the relief valve.
Fire safe design
With the valve heated in a fire application, the non-metal material parts such as seat sealing ring of PTFE, O ring for the stem, and sealing gasket for body and bonnet, might be damaged due to high temperature. Our company's special design of auxiliary metal to metal or the graphite seal is provited fo rthe trunnion ball valve to effectively prevent both internal and external leakage of the valve. As required by customers, our company's fire safe design for the trunnion ball valve meets the requirement of API 607, API 6Fa, BS 6755 and JB/T 6899.
Self-relief in the body cavity
As the liquid medium left in the body cavity gasifies due to increased temperature, the pressure in the body cavity becomes abnormally higher, when the medium itself in the cavity would propel the seat and self-relieves the pressure to ensure the safety of valve.
Our Advantages:
1. We Are Factory: FYV has 3 production bases and 1 foundry which located in Wenzhou, Shanghai and Lishui city of China. The Factory Size in Square Meters: 110, 000. FYV has over 600 staff members, more than 60 technical engineers, a digital process center and more than 350 sets of various middle and large equipments. The annual sales revenue reaches above $80 million US Dollars.
2. Regional Sales: We provide specialized sales service refers to different kind of region all over the world. Each sales team member is good at the local language and well experienced to the responsible market. For example: Russian, German, Spanish, Japanese, etc.
3. Low MOQ: Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.
4. OEM Accepted: We can make the products with the client's demand standard or the custom requirement.
5. Complete Service: We are always ready to hear from you, be responding to your enquiry immediately. Our trade manager is always online for you.
6. Good Quality: We have strict quality control system and amounts of testing equipments for different kind of valve, such as size, pressure, working environment etc. We are winning the market reputation with the time goes by.
7. Quick Delivery: We have the large stock for some hot products.
8. Competitive Prices: We are the manufacturing company which not only has our own manufacturing workshop, but the casting company as well.
No.
Parts Name
Materials
Carbon Steel
 Low Tem. Steel
 Stainless Steel
1
Body
ASTM A216-WCB
ASTM A352-LCB/LCC
ASTM A351-CF8/CF8M
2
Fire safe packing
Graphite
Graphite
Graphite
3
O-ring
NBR/Viton
Viton
Viton
4
Spring seat
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
5
Spring
17-7PH/Inconel
17-7PH/Inconel
17-7PH/Inconel
6
Gasket
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
7
Adjusting ring
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
8
Seat ring
ASTM A105+ENP
ASTM A350-LF2+ENP
ASTM A182-F304/F316
9
Seat
PTFE/RPTFE/NYLON
PTFE/RPTFE/NYLON
PTFE/RPTFE/NYLON
10
Trunnion
ASTM A105+ENP
ASTM A182-F304
ASTM A182-F304/F316
11
Screw
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
12
Drain plug
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
13
Sliding bearing
304+PTFE
304+PTFE
304+PTFE/316+PTFE
14
Ball
ASTM A105+ENP
ASTM A350-LF2+ENP
ASTM A182-F304/F316
15
sealant injection
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
16
Sliding bearing
304+PTFE
304+PTFE
304+PTFE/316+PTFE
17
Stem
ASTM A182-F6a
ASTM A182-F304
ASTM A182-F304/F316
18
Packing
Graphite
Graphite
Graphite
19
Gasket
304+Graphite
304+Graphite
304+Graphite/316+Graphite
20
Gasket
304+Graphite
304+Graphite
304+Graphite/316+Graphite
21
Bonnet
ASTM A216-WCB
ASTM A352-LCB/LCC
ASTM A351-CF8/CF8M
22
Bolt
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
23
Nut
ASTM A194-2H/2HM
ASTM A194 4
ASTM A194-8/8M
24
Packing case
ANSI 1025
ASTM A182-F304
ASTM A182-F304/F316
25
Screw
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
26
Fire safe packing
Graphite
Graphite
Graphite
27
Pin
ANSI 1045
ANSI 1045
304/316
28
Gland
ASTM A105
ASTM A350-LF2/LF3
ASTM A182-F304/F316
29
Release valve
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Length of structure: API 6D/ASME B16.10. For product beyond the scope of the standard, it shall be manufactured by specifications in Fangyuan standard or user's requirements.
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25/ ASME B31.8
Wall thickness: ASME B16.34
Fireproof test: API 607/API 6FA
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
Product scope: NPS 1-1/2″~NPS 60″, CL150~CL2500
Main body material: A105LF2etc.
Valve seat material: PTFE RPTFE NYLON DEVLON Derlin PEEK PPL HNBR FKM etc.
Drive device: Handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
Ordering Information
Users should be based on the products listed in this catalog to select and place order. As otherwise required or on the following changes should be stated in the contract.
1. Product type and valve specifications DN
2. The valve pressure rating (Metric with nominal pressure PN, Anglo- American system on LB, the Japanese system of K-level)
3. The valve structure length performance standards
4. Connecting flange standards and seal form
5. Weld end dimension implementation standards and pipe No.
6. Requirement of gear operator (including transfer mode and its arrangement mode)
7. Requirement of electric actuator(including model and its transmission torque)
8. The main material (including body, bonnet, trim and fasteners)
9. Temperature º C
10. Medium
11. Sealing vice materials' matching
12. Requirements of fire protection, anti-static and fire-resistant
13. Greasing or sewage and venting required
14. The other statement(such as structural features, application specification, flaw detection, etc. )
Installation and maintenance instructions
1. Valves should be stored in dry and ventilated room, the channel to be blocked at both ends;
2. Valves must be turned off during the suspension period and the storage, to ensure in good seal condition;
3. Valves should be checked carefully on the models, specifications and technical performance and ensure its according with the requirements before installation, also make clear the valve cavity and the appearance of dirt, sediment and rust;
4. The opening and closing should be turned by handwheel, not the help of other auxiliary lever;
5. This valve should be kept clean during using, and the stem threaded portion should be regularl
Â
Â
Â
Design standard: API 6D
Length of structure: API 6D/ASME B16.10.
Flange connecting end: ASME B16.5/ASME B16.47
Butt welding connecting end: ASME B16.25/ ASME B31.8
Fireproof test: API 607/API 6FA
Inspection and test: API 6D
Pressure and temperature rating: ASME B16.34
Product scope: NPS 1-1/2″~NPS 60″, CL150~CL2500
Main body material: WCB, LCB, WCC, CF8, CF8M, etc.
Valve seat material: PTFE, RPTFE, NYLON, DEVLON, , PEEK, etc.
Drive device: Handle, worm wheel, electric, pneumatic, etc.
Main Feature
Urgent grease injection device
According to customer s' requirement, the trunnion ball valves made by our company are provided with devices for urgent grease injection, which are on both the stem and seat for the trunnion ball valves of DN >150mm (NPS), and in the body cavity for the valve of DN < 125mm. When the O ring of stem or the body seat ring is damaged due to accident, the medium leakage between body and stem can be prevented by injecting the sealing grease through the device.
Double-block and bleed functions
In general, our company's trunnion ball valve features the front ball sealing design structure. Each seat of the ball valve can separately cut off the medium at both inlet and outlet of the valve to realize double-block functions. When the ball valve is closed, body cavity and two of the body ends can be blocked with each other even if both the inlet and outlet are under pressure, when the medium left in the body cavity might be bled through the relief valve.
Fire safe design
With the valve heated in a fire application, the non-metal material parts such as seat sealing ring of PTFE, O ring for the stem, and sealing gasket for body and bonnet, might be damaged due to high temperature. Our company's special design of auxiliary metal to metal or the graphite seal is provited fo rthe trunnion ball valve to effectively prevent both internal and external leakage of the valve. As required by customers, our company's fire safe design for the trunnion ball valve meets the requirement of API 607, API 6Fa, BS 6755 and JB/T 6899.
Self-relief in the body cavity
As the liquid medium left in the body cavity gasifies due to increased temperature, the pressure in the body cavity becomes abnormally higher, when the medium itself in the cavity would propel the seat and self-relieves the pressure to ensure the safety of valve.
Our Advantages:
1. We Are Factory: FYV has 3 production bases and 1 foundry which located in Wenzhou, Shanghai and Lishui city of China. The Factory Size in Square Meters: 110, 000. FYV has over 600 staff members, more than 60 technical engineers, a digital process center and more than 350 sets of various middle and large equipments. The annual sales revenue reaches above $80 million US Dollars.
2. Regional Sales: We provide specialized sales service refers to different kind of region all over the world. Each sales team member is good at the local language and well experienced to the responsible market. For example: Russian, German, Spanish, Japanese, etc.
3. Low MOQ: Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.
4. OEM Accepted: We can make the products with the client's demand standard or the custom requirement.
5. Complete Service: We are always ready to hear from you, be responding to your enquiry immediately. Our trade manager is always online for you.
6. Good Quality: We have strict quality control system and amounts of testing equipments for different kind of valve, such as size, pressure, working environment etc. We are winning the market reputation with the time goes by.
7. Quick Delivery: We have the large stock for some hot products.
8. Competitive Prices: We are the manufacturing company which not only has our own manufacturing workshop, but the casting company as well.
No.
Parts Name
Materials
Carbon Steel
 Low Tem. Steel
 Stainless Steel
1
Body
ASTM A216-WCB
ASTM A352-LCB/LCC
ASTM A351-CF8/CF8M
2
Fire safe packing
Graphite
Graphite
Graphite
3
O-ring
NBR/Viton
Viton
Viton
4
Spring seat
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
5
Spring
17-7PH/Inconel
17-7PH/Inconel
17-7PH/Inconel
6
Gasket
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
7
Adjusting ring
ASTM A105+ENP
ASTM A350-LF2+ ENP
ASTM A182-F304/F316
8
Seat ring
ASTM A105+ENP
ASTM A350-LF2+ENP
ASTM A182-F304/F316
9
Seat
PTFE/RPTFE/NYLON
PTFE/RPTFE/NYLON
PTFE/RPTFE/NYLON
10
Trunnion
ASTM A105+ENP
ASTM A182-F304
ASTM A182-F304/F316
11
Screw
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
12
Drain plug
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
13
Sliding bearing
304+PTFE
304+PTFE
304+PTFE/316+PTFE
14
Ball
ASTM A105+ENP
ASTM A350-LF2+ENP
ASTM A182-F304/F316
15
sealant injection
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
16
Sliding bearing
304+PTFE
304+PTFE
304+PTFE/316+PTFE
17
Stem
ASTM A182-F6a
ASTM A182-F304
ASTM A182-F304/F316
18
Packing
Graphite
Graphite
Graphite
19
Gasket
304+Graphite
304+Graphite
304+Graphite/316+Graphite
20
Gasket
304+Graphite
304+Graphite
304+Graphite/316+Graphite
21
Bonnet
ASTM A216-WCB
ASTM A352-LCB/LCC
ASTM A351-CF8/CF8M
22
Bolt
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
23
Nut
ASTM A194-2H/2HM
ASTM A194 4
ASTM A194-8/8M
24
Packing case
ANSI 1025
ASTM A182-F304
ASTM A182-F304/F316
25
Screw
ASTM A193-B7/B7M
ASTM A320 L7
ASTM A193-B8/B8M
26
Fire safe packing
Graphite
Graphite
Graphite
27
Pin
ANSI 1045
ANSI 1045
304/316
28
Gland
ASTM A105
ASTM A350-LF2/LF3
ASTM A182-F304/F316
29
Release valve
ANSI 1045
ASTM A182-F304
ASTM A182-F304/F316
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
API 6D Electric Actuator Fully Welded Ball Valve
Model NO.: API 6D
Type: Fixed Ball Valve
Function: Blow-Down Valve, Relief Valve, Atmospheric Valve, Bypass-Valve
Temperature: High Temperature
Application: Industrial Usage, Water Industrial Usage, Household Usage
Size: 2′′-64′′
Class: 150lbs-2500lbs
Trademark: FYV
Transport Package: Plastic+Plywood Case
Specification: API/ISO/CE
Origin: China
HS Code: 8481804090
Model NO.: API 6D
Type: Fixed Ball Valve
Function: Blow-Down Valve, Relief Valve, Atmospheric Valve, Bypass-Valve
Temperature: High Temperature
Application: Industrial Usage, Water Industrial Usage, Household Usage
Size: 2′′-64′′
Class: 150lbs-2500lbs
Trademark: FYV
Transport Package: Plastic+Plywood Case
Specification: API/ISO/CE
Origin: China
HS Code: 8481804090
Design standard: API 6D