Injection Molding Machine For Water Cap MYTAO original servo closed-loop direct drive hydraulic control technology, high response response, response time of mold opening and closing action ≤15ms; repeat positioning accuracy ±0.1mm; servo hydraulic direct drive technology, fast action response, accurate low-pressure position control for better protection Mold, mold opening and closing are controlled independently to realize multi-linkage function and meet the requirement of short cycle time of bottle capping machine. Injection Molding Machine For Water Cap,Servo Energy-Saving Injection Molding Machine,Fast Injection Molding,Injection Moulders Ningbo Rhea Machinery Co., Ltd. , https://www.mytao-global.com
Screw Diameter: Φ 25- Φ 250
L/D ratio: 8-20
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly
Specification:
Screw Diameter: Φ 25- Φ 250
L/D ratio: 8-20
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly
Production meets the quality requirements of bottle caps:
The appearance of the bottle cap: full molding, complete structure, no obvious shrinkage, bubbles, burrs, defects, uniform color, and no damage to the anti-theft ring connecting bridge;
Opening torque: the maximum torque required when opening the packaged anti-theft cover;
Sealing performance: airless beverage bottle cap 200kpa does not leak, 350kpa does not take off; aerated beverage bottle cap 690kpa does not leak, 1207kpa does not take off; (new standard)
Thermal stability: no bursting, no deformation, no air leakage when inverted (no liquid leakage);
Drop performance: no leakage, no cracking, no flying off.
Conical Twin Screw for Plastic Extruder Machine
Model NO.: SZ conical twin screw gearbox
HS Code: 8483409000
Model NO.: SZ conical twin screw gearbox
HS Code: 8483409000
Specification: