1,Unit performance
Â
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
Â
The width of material: 250≤§≤520
Â
Product speed: 0-8m/min
Â
Occupy groud area:  length 30m xwidth 3m
Â
Total power: about 62kw
Â
2,Equipment structure
Â
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
Â
3,Each part main parameter:
Â
3,1 Passived DecoilerÂ
Decoiler: decoiler,  Inner expanding type,  capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
Â
3,2Â Leveler
Motor: 7.5KW  Frequency conversion motor
Â
3,3 Servo Feeding machine
Drive: 4 kw  Servo motor
Â
3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov,  Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
Â
3,5 Forming machine
Rack: cast iron frame, Â
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment Â
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power:  30KW Frequency conversion motor ZQ500 reducer
Drive type:  every rack has one gear power distribution box.
Â
3,6 Hydraulic cutting
Hydraulic pressure cuttingÂ
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece
Â
3,7 Electronic controlling: PLCÂ
Â
Â
Main Machine Parameter
No.
Item
Unit
Data
Remark
1
Raw material
Type
Â
MS\galvanized sheet
Â
Strength of panel
Map
≥350
Â
Thickness of panel
mm
1.2~2.0
Â
2
Size
mm
See figure
Â
3
Speed
m/min
6~8
Â
4
Material of roller
Â
GCr15Hardening treatment
Â
5
Drive type
Â
Gear box
Â
6
Total power
kw
About 45
Â
7
Electrical system
Â
PLC Inverter control
Â
8
Contour dimension(L*W*H)
m
35X4X3.9
Â
Delivery of machine
Related Products
The details of the scaffolding machine
NO.
CONTENTS
1
Scaffolding plank standing tube welding device
2
Scaffolding plank ledger welding device
Â
3Â
Punching DeviceFull automatic punching device
Semi-automatic punching device Manual punching device Spare part:punching mould
Â
4Â
diagonal brace flattening &punching deviceFull automatic diagonal brace flattening &punching device
Semi automatic  diagonal brace flattening &punching device Manual  diagonal brace flattening &punching device Spare part:punching mould
Â
5Â
Tube cutting machineAuto Blade cutting Device
Swing saw cutting device Direct saw cutting device Auto direct saw cutting device
6
Auto Scaffolding plank wedling line
Auto robot welding
Auto robot hand welding
7
Base jack & U-head jack welding device
8
Auto scaffolding plank roll forming machine
Introductions of the scaffolding machine
1. Scaffolding plank standing tube welding device
 Equipment function:
It is mainly used in auto seam welding for steel tubular scaffold pipe and disk plate, it also can add
Main Parameter:
Length:1-3m
Tube diameter:¢48mm &¢60mm
Disk plate quantity:1-6 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 13 sets inveter gas welding device and special device
More standing tube choices:
Â
Â
Â
2. Scaffold ledger welding device
Equipment function:
  It is mainly used in auto seam welding for steel tubular scaffold ledger wedge head and tube.
Main Parameter:
Length:0.5-3m
Tube diameter:¢48mm
Welding quantity:2 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 2 sets inveter gas welding device and special device
More ledger choices:
Â
Â
Â
3. Scaffold tube punching device
Equipment function:
   It is mainly used in punching holes for standing tube ends
Basic parameter:
Length: 1-3m
Tube diameter:¢48mm&¢60mm
Length tolerance: ≤0.5mm
Basic component:
It consists of auto feeding system, seam positioning system (it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
Â
Â
4. diagonal brace flattening &punching device
Equipment function:
It is mainly used in flattening &punching for diagonal brace both ends
Basic parameters:
Length:0.5~3m
Tube diameter:¢33mm or ¢48mm
Length tolerance:≤0.5mm
Basic component:Â It consists of auto feeding system, seam positioning system(it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
Â
Â
5.Tube Cutting Machine
Main function:
It is mainly used tube cutting
Basic parameter:
Length:0.6~3m
Tube diameter:¢33m,¢48mm and ¢60mm
Length tolerance:≤0.5mm
Auto Blade cutting device:
Â
Saw tube cutting device:
Â
6.Auto scaffold welding device
Â
Main function:
It is mainly used in auto welding for scaffold end cap and stiffener
Basic parameter:
Length:0.6-3m
Length tolerence:≤1mm
Basic component:
No.
Name
Type
Quanti.
Remark
1
Welding robot hand
4200X650X500
1
Double welding head
2
Welding power supply(optional)
MAGMEET350
2
Supplied by buyer
3
Working clamp
Â
2
Â
4
positioner
Â
2
optional
5
Moving rail and parts
13m
1
Â
6
Electric control system
Â
1
Â
Â
 Adjustment screw welding device
Â
Equipment function:
It is mainly used in welding for scaffolding base and U-head jack screw.
Basic parameter:
Length:0.3-1.0m
Length tolerance:≤0.5mm
Basic component:Â It consists of welding device and special device.
Â
Â
Â
Stainless Steel Building Scaffolding Walkborad Roll Forming Machine Factory
Model NO.: BOSJ-S
Customized: Customized
Advantage: Easy to Maintenance
Condition: New
Control System: PLC Control System
Processing Methods: Pre-Galvanized
Making Machine: Multifunctional
Material of Roller: Gcr 15
Machine Type: Automatic
Thickness: 1.2-1.8mm
Production Speed: 8m/Min
Power: 30kw
Trademark: BOSJ
Transport Package: Suitable Size Container for Machine
Origin: Jaingsu China
HS Code: 8455212000
Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine