Shuttering Magnet for Precast Formwork Shutter Magnet for Precast Formwork are used for building constructions , shuttering magnets is a formwork holder, or cement hold magnet box which made of steel and block magnet.The structure of concrete magnet is very trim, every mechanic part are well welded thus the structure is also very stable. Construction workers could adjust the magnetic force through rotate the bold nut,thus they could remove the Magnetic formwork systems easily. The steel shell could focus most of the magnetic force to the bottom while prevent corrosion.The steel surface is plastic sprayed please do not make abrasion on it.
However, there are two means to use Magnet for Precast formwork, first one is to build a concrete formwork directly on the ground,then inject the concrete,this one is more flexible on construction design . Second one is use the Magnet for precast concrete on a concrete formwork platform, remove the shuttering magnet
solutions when concrete is hardened ,then move the concrete wall to a ground or warehouse with a forklift or crane,hence build construction will much faster and safer. workers could build construction much more quickly and safely and make more money from their hard work, and construction businessmen could also make and save more money from their business.
Shuttering magnet is consist by neodymium block magnet, and steel house,the magnet is very big size thus the magnetic force is very large.
Precast magnet box, a magnetic tool to hold concrete formworks. After setting the magnet to the formwork,concrete could be inject into the formwork, The concrete will be formed trimly just as the formwork likes.Shuttering magnet is made of big block Neodymium Magnet and the steel house, there are two hex bolt and a round handle button on the top of the Precast Concrete Magnet, the hex bolt is for fixed with adapter and handle button is for push to use.
How to use shuttering and formwork magnet? People who use this shuttering magnet box need to find some shuttering adapter to suit the precast magnet box onto the concrete framework, this framework could be made of plywood,wood, iron steel, aluminum... Then push the round handle button on the top, the block magnet in steel box will sink and contact and catch with iron steel part. If someone need to remove the shuttering Magnetic box, he need to find a crowbar and pry up the round handle button and the block magnet will return to its position and not catch the iron steel.
Magnetic Formwork Systems,Magnet For Precast Formwork,Shutter Magnet,Shuttering And Formwork Magnet,Shuttering Magnet Box NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , https://www.shinemagnets.com
In May, the passenger car market remained sluggish, with 1,049,900 units sold, a drop of 8.71% from the previous quarter. The year-on-year decline was 0.11% year-on-year, with the first negative growth during the year. From January to May, the increase in sales of passenger cars continued to decline from January to April. Japanese car maker Toyota and Honda’s sales in China’s joint ventures have fallen sharply, and Japanese car market share continues to decline. At present, the exit of policies has the greatest impact on crossover passenger vehicles. The negative impact of the earthquake in Japan has further manifested and some Japanese joint ventures have experienced severe underemployment.
Talking about the “double down†status of China’s auto production and sales, Dong Yang said that at present, the government should no longer issue negative policies and news, and the automobile industry, which has experienced a significant slowdown, should be given proper consideration and encouragement. The CAAC calls on all sectors of the society, especially the government departments, to pay attention to the fact that the growth rate of production and sales has fallen sharply since the beginning of this year. “The automobile industry once played an important role in coping with the economic crisis. As the industry chain is long and involved in a wide range, the effect of stimulating economic growth is obvious. When the automobile industry cannot be used, it encourages the policy, and now it is said that the vehicles are saturated and constantly suppress it. â€
As of May, the inventory of vehicle companies was 662,200, which was a decrease of 145,500 units compared to the end of 2010, and it showed a trend of declining inventory from month to month. China Automobile Association said that as the overall growth rate of the industry fell sharply, the company actively responded to the decline in inventory.
Faced with numerous "unfavorable factors," Dong Yang optimistically pointed out that in May 2008, automobile exports hit a record high in March 2008, with exports of 71,100 vehicles. According to the statistics of China Automobile Association Automobile Export Corporation, in May, the export of automobile enterprises increased by 6.79% from the previous month, and the year-on-year growth rate was 53.03%. From January to May, 225,400 vehicles were exported, an increase of 56.72% over the same period of the previous year. 
The first negative growth in passenger car sales during the year
It is rumored that the "energy-saving vehicle subsidy policy will be withdrawn in June" and the China Automobile Industry Association is communicating with relevant government agencies. Yesterday, Dong Yang, Secretary-General of China Automobile Association, disclosed at the information conference that the basic confirmation of the subsidy will not be cancelled.