The ribbon blender is widely used in chemical, food and Pharmaceutical Industry. It can handle different powders. The mixing homogeniety is high.
Ribbon Mixer is characterized by high mixing precision, and wide application to food, chemical industries, and building lines. The major sections of a mixer are barrel, ribbon agitators, feeding ports, discharging port and driven unit!! Ribbon Mixer Ribbon Mixing Machine, Ribbon Mixers, Ribbon Blender Mixer, Vertical Ribbon Mixer Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com
Conical Screw Mixer is worldwide acknowledged as the industrial standard conical shape mixer and Conical Screw Mixer is used on a wide variety of applications in the industry such as pharmaceutical, food, battery materials, dyestuff & pigment, chemical industry, fertilizer, rare earth, titanium powder etc. Conical Screw Mixer is widely used to mix powder-powder, power-liquid, especially for fine powder, fiber or chip-shaped materials
Â
Working Principle:
Conical screw mixer is made based on the principle of rotation and revolution, conveying the material along with the axle by means of rotation. Simultaneously, the material is upward and downward cycled by gyratory stirring along wall surface of cone, with the central revolution, conical screw mixer can be performed in the shortest time.
Â
Features:
1, homogeneous mixing & no deadcorner
2, short mixing time 5-15minutes
3, clean discharge & no leftover
4, central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5, main shaft seal: Stuffing seal and air purge seal
6, drive: Siemens motor, cycloid or gear reducer
7, limit/safety switch (optional)
8, heating/cooling jacket optional)
Datasheet:
Â
Â
Â
  Model Project
All volume
(M3)Loads coefficient
Electrical machiney power
(KW)Size (mm)× Max-diameter ×High
Equipment weight (kg)
DSH-0.06
0.06
0.4-0.6
1.5
φ630×1451
150
DSH-0.1
0.1
0.4-0.6
1.5
φ715×1569
250
DSH-0.3
0.3
0.4-0.6
2.2
φ920×1960
550
DSH-0.5
0.5
0.4-0.6
3
φ1140×2320
600
DSH-1
1
0.4-0.6
4
φ1480×2895
1200
DSH-1.5
1.5
0.4-0.6
5.5
φ1633×3210
1350
DSH-2
2
0.4-0.6
5.5
φ1816×3495
1500
DSH-3
3
0.4-0.6
7.5
φ2040×3760
2300
DSH-4
4
0.4-0.6
11
φ2250×4425
2520
DSH-6
6
0.4-0.6
15
φ2548×4940
3000
DSH-8
8
0.4-0.6
18.5
φ2780×5360
4500
DSH-10
10
0.4-0.6
22
φ3018×5815
5500
DSH-12
12
0.4-0.6
22
φ3204×6100
5900
DSH-15
15
0.4-0.6
30
φ3442×6540
6600
DSH-20
20
0.4-0.6
37
φ3805×7420
9800
DSH-25
25
0.4-0.6
37
φ4086×7800
10200
DSH-30
30
0.4-0.6
45
φ4330×8200
11500
 2.    Changes are available according to customer's special requirement;
 3.   Shuang Long Group might develop new data which is not modified timely on the Web.
Applications:
Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time!
Our high efficiency horizontal ribbon mixer can be equipped with heating or cooling jacket if temperature control is required. Besides, all of our powder mixer can tolerate about 10% liquid additives! We will add spraying or atomizing unit inside the tank!
Batch Mixing Vertical Type Conical Mixer
Model NO.: DSH
Layout Type: Verticle
Mixing Drum Shape: Conical
Additional Capabilities: Heating, Cooling and Drying
Operating type: Cycle Operating
Condition: New
Construction Material: Ss304
Trademark: Shuanglong
Specification: CE, ISO9001
Origin: Shanghai, China
HS Code: 84798200
Introduction: