Mixing Machine, in a word, is a kind of machine to mix two kind of materials or more than two kind of material together in a ratio. There are several types of mixers using for mixing powder and small granule.
The discharging port is set in the bottom centre, with the help of the outer ribbon,the material can be discharged completely, and no dead zone.
double screw cone mixer is widely used for mixing and homogenization of powders and pastes in food, chemical and pharmaceutical industry.
Mixing Machine Mixing Machine,Concrete Mixer Machine,Powder Mixer Machine,Cement Mixer Machine XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl
Â
Mixing machine includes:
Ribbon Blender:The outer ribbon push the material from the two ends to the centre, inner ribbon push the material from center to the two ends.Thus to achieve material convention
Double screw cone mixer: double screw cone mixer is a convective mixer with high mixing efficiency. It is gentle and guarantees the highest level of mixing accuracy without product distortion.
The rotating cantilevered (free hanging) mixing screws convey the product from bottom of the vessel to the product surface. The mixing screws are suspended from an orbital arm, which rotates the mixing screws along the conical inner vessel wall causing convective mixing of particles and shear.
The speed of particles in the downward massflow when recirculated by gravity in a conical vessel increases as the vessel diameter decreases. The result of these simultaneous actions is a fast and intensive mixing with low consumption of power together with high standards of mixing accuracy.
Dsm-Vertical Dough Mixer-Biscuit Machine Modle: 600
Model NO.: VDM600
Trademark: DSM
Origin: China
HS Code: 8438100000
This type of machine is designed in single/double speed mixing, and is ideal for the preparation of dough for crackers or delicate mixtures or the dough especially for preliminary mixing and secondary mixing. The dough is mixed in mobile tubs which are attached to the unit. The two mixing shafts are constructed entirely in stainless steel, and each is fitted with four shaped mixing arms. The independent electrical control panel contains all power and auxiliary controls. This machine may be used for continuous operation provided with a certain quantity of dough tubs. Very practical used for the preparation of the fermented dough. All surfaces that come into contact with the product are in stainless steel. The machine is designed and fitted with safety devices in accordance with current safety legislation.