Car foil is a popular item in car beauty. Unfortunately, some owners have posted stickers for a while and found bubbles on the film! This is how to do? What are the reasons for bubbles after car filming? 1, the quality of the film is not off. According to experts from Beimai Auto Parts Network, although the film industry is not big, the water is very deep. There are a small number of repair shops that will be shoddy, labeling inferior car film, fooling consumers, and some cars with poor quality . After the film is exposed to sunlight, a chemical reaction occurs and foaming can not be avoided. 2. There is a problem with the mounting process. A small part of the repair shop in the busy time, you may make some apprentices stickers car film, because the process is not necessarily in place, it may lead to the generation of bubbles; if not ready to clean the construction site, there is cause sand and dust adhesion On the surface of the car body, it is also possible to cause bubbles. What should I do if there is a bubble after the car is filmed? 1. If the number of bubbles is large and the volume is large, it is difficult to flatten. It is recommended that you change the film again, because it will not only affect the appearance, but also affect the driving safety. 2, if the bubble is not a lot, the volume is relatively large, you can cut a small mouth, and then slowly scrape with a scraper and a baking gun. 3. If there are not many bubbles and the volume is small, we can use a needle to puncture the bubble and then flatten it. 4. If the incident is sudden, the number of bubbles is large and large, which affects the safety of driving. It is recommended that you follow the same way as the mobile phone film, first gently pick up the side of the bubble, and then slowly paste it according to the regular process, but this This method is only suitable for emergency. It is recommended that you replace it with a new one as soon as possible. 5, if you encounter sand in the car film, you can only resort to a professional 4S shop or car beauty shop. How to identify good and bad car film? 1. Look: When buying a car film, you must carefully observe the sharpness. No matter how dark the film is, you must have considerable clarity. The law stipulates that the light transmittance of the front windshield must reach 70% or more. Therefore, the light transmittance of the film must also be above this value. Beimai Auto Parts Network expert said that high-quality car film can achieve this point, the field of vision is very clear, and the inferior car film is attached to it. 2, smell: high-quality car film has been strictly tested before entering the market, because the use of environmentally friendly glue, so basically no smell; and inferior car film generally has odor, often occurs under the sun exposure chemical reactions, produce formaldehyde and other harmful gases, harm to the health of the owner. 3, touch: high-quality car film manufacturing process, the surface is basically hardened, feel smooth, texture, long-term use without scratches; inferior car film are mostly common color film, rough and crisp to touch, It is easy to produce scratches. 4. Selection: When installing the film, try to choose those stores that are closed and dust-free, because once there is dust and other interventions, it is difficult to guarantee the bubbles. 5, etc.: After the car film is finished, try not to lift the window within three days, and do not wash the car with water, so as to prevent the moisture of the car film from drying out. North Mai Auto Parts Network experts cautioned that have children at home owners need to take note, to prevent small children secretly rolled down the window; rainy weather also try not to film. Because different car film drying speeds are different, in order to be on the safe side, it is recommended that you do not wash the car within 7~15 days after filming (the time required in winter is longer). If you find that the body is dusty, it is recommended that you wipe it gently with a sponge of lower density. 6, off: in the winter just past the car film, avoid opening the heating line, otherwise it will generate bubbles near the heating line, it is a pity. 7, ratio: the price is too low, most of them are fakes, should not be greedy and cheap to eat big losses. I feel that the information of Beimai Auto Parts Network is useful, forward it~ [How to do bubbles after car filming? 】 Vibrating Screen Machine,Tumbler Screener,Tumbler Screening,Tumbler Screening Machine Xinxiang Zhenying Mechanical Equipment Co., Ltd , https://www.zhenyinggroup.com
