Air heat aging test box installation and commissioning attention to what? Suzhou Keitel Instrument Co., Ltd. specializes in the production of air heat aging test chambers, natural gas exchange aging test chambers, forced air aging test chambers, ventilation aging test chambers, high and low temperature test chambers, constant temperature and humidity test chambers, ultraviolet aging test chambers, and ozone aging. Test box. Welcome to call. Manifold Filter, Spray guns contain filters that help provide a cleaner spray out of the gun tip. Here are some Spray Gun filter questions we`ve answered in the past, more than once. Manifold Filter Manifold Filter,Manifolds Vacuum Filter,Multi-Branch Manifold Filter,Glass Funnel Manifold Filter Fuzhou HVBAN Mechanical Equipment Co., Ltd. , http://www.hi-sprayer.com
First, the matters needing attention
1. Take care not to force on the glass during transportation, and do not hit the box.
2. After the equipment is grounded, it should be placed in a stable manner. If the ground is uneven, it should be corrected.
3, please do not use the instrument in direct sunlight or hot and humid places.
4. The equipment should be far away from sources of electromagnetic interference, and the grounding wire of the equipment should be effectively grounded.
5. When the equipment is in normal operation, placing the contents in the box should not affect the air circulation to ensure that the temperature inside the box is uniform.
6. When the power supply is AC220V50HZ, it must use a 16A or above three-core socket, and there is a reliable grounding wire. Do not use the two-pin socket without authorization.
7. Don't put the power cord close to the back, and don't let the instrument or other items press on the power cord, so as not to damage the power cord.
Second, the product parameter project K-WKL-B type
Temperature range room temperature ~200°C or 300°C
Temperature fluctuation range ≤±0.5°C
Temperature distribution uniformity ≤±1°C%
Sample turntable speed /
Number of air changes 0 to 20 times/h
Wind speed 0.5～1.5m/s
Studio size 450×450×500mm
Fan power 60W
Power supply voltage AC220V50Hz
Rated power 200°C2.2KW300°C4KW
Weight about 180kg
1. What does a spray gun filter do?
The filter, which typically resides inside the handle of the gun, filters the paint one last time before it leaves the spray gun. The gun filter prevents debris from entering the tip. Preventing debris from entering the tip helps eliminate blockage, and therefore downtime, and keeps the spray surface clean.
2. Are there different types of filters? Which should I choose?
In general, the main difference in spray gun filters is in the screen size. You`ll want to choose a finer screen mesh for lacquers and fine finishes. A larger mesh can be used for latex paints.
3. How often do gun filters need to be replaced?
This can vary, too, depending on the amount of [trash", larger unwanted particulates, and the size of the mesh of your filter. Fine filters will need to be replaced more often. Why not clean them? Well, you can clean a filter, but generally these filters become so clogged over time that it is not worth the amount of work, and time, to clean them. It`s usually easiest to replace.
4. How often do gun filters need to be cleaned?
It is recommended that you clean the gun filter every time you clean your sprayer. This will give you the longest life for your spray gun filter. Eventually, though, you will have to replace the filter. Filters don`t wear out, as their made of stainless steel that prevents rust and corrosion, but they do accumulate trash and waste, despite the best efforts to keep them clean.
If you`re using an extremely fine mesh filter there is a chance that you could need to clean the filter during a job. The easiest way to tell a filter needs to be cleaned, during spraying, is the spray gun`s reversible tip begins to clog on a constant basis.
5. What would happen if you used the wrong filter for the tip?
It`s important to use the right filter mesh for the paint you`re spraying. If you use a wide mesh with a tip too small you`ll have a tip that constantly clogs. Using a fine mesh with a wide open tip you`d run into paint flow restriction. This can put unwanted stress on the sprayer, possibly reducing its lifespan.