Tandem Scissor Lift Tables,Tandem lift tables,Tandem scissor lift table Marco Lift (Ningbo) Co., Ltd. , https://www.marcolifttables.com
    The radar level gauge operation steps are as follows:
    1. Prior to the process of opening the storage tank, it must be clearly acknowledged that there is no pressure inside the tank and there is no harmful medium.
    2. Clearly recognize that the empty can or level in the vessel will just cover the bottom of the vessel. Positioning and debugging will be carried out. Positioning and debugging will also be carried out under the condition of less material level. False echo storage can be used for radar level gauges. Echo signal optimization.
    3. Turn the flange mark one hole position, or turn the turnbuckle 1/8 turn, pay attention to the amplitude, then rotate the flange or turnbuckle, until it turns one turn, and locate in the best position of the echo signal.
    4, in the best position to fix the flange or tighten the turnbuckle, if indispensable, change the tight seal closed loop.
    Huajiang Automation can provide you with professional radar level meter selection suggestions and reliable radar level meter products. Any questions can be caused. We will have professional technical personnel to help you answer, and hope to bring you help!
The radar level gauge operation steps are as follows
    Radar level meter has the advantages of low maintenance, high performance, high precision, high reliability and long service life. It has unparalleled advantages compared with contact instruments such as capacitors and hammers. Microwave signal transmission is not affected by the atmosphere, so it can meet the requirements of the harsh environment of volatile gases, high temperature, high pressure, steam, vacuum and high dust in the process. The product is suitable for harsh environments such as high temperature, high pressure, vacuum, steam, high dust and volatile gases. During operation, the amplitude of the echo signal clearly indicates whether the installation position is optimal. If the amplitude of the echo signal is relatively low in the solid material application, the flange can be turned. Each rotation of one hole position minimizes the interference echo. Extra can also be stored through false echoes to achieve the best survey results.