How to perform a sprinkler stall test The sprinkler automatic transmission stall test test is used to measure the maximum engine speed when the shift lever is in the D or R position and the torque converter is out of order. This test measures the working conditions of the torque converter, guide wheel unidirectional detacher, and the fixed performance of the clutch and brake in the transmission. The test method is as follows: Check the transmission oil level, temperature, and engine coolant temperature. When testing, make sure that no one is in front of or behind the vehicle. Oil level: At the "HOT" mark of the dipstick. Oil temperature: 80~100°C. Retreat to neutral, but not reverse gear, to prevent the transmission from the 5th gear directly to reverse people. Sprinkle truck to reverse gear After the shift lever first returns to the neutral position between 3rd and 4th gear, the internal shift lever will move backward first, then move to the 5th gear/reverse shift position, and the internal gear will change. The relative positions of the lever and reverse gear and the position pin become. At this time, rotate the internal shift lever in the direction indicated by arrow D to replace the reverse gear without any interference from the reverse limit pin. Prevents mistakenly changing the working diagram of the reverse gear mechanism. What are the causes of gear wear? Gears of manual transmissions often work under conditions of high rotational speed, high load, speed and load, and normal sprinkler wear is not avoided. In addition to normal wear, gears will also cause gear impacts due to poor lubrication, poor lubrication conditions, improper driving operation, improper meshing of gear assembly during maintenance, etc. Gear teeth will not mesh properly and start-up jitter will accelerate gears. Wear and damage. In addition, the wear of other parts of the gear or other parts (such as spline grooves in gear holes, bearings, spline shaft bending, etc.), improper assembly of the clutch or drive shaft, manufacturing defects (such as non-uniform carburized layers, gears Warp, etc.) will also accelerate gear wear. The baby grows up day by day, and likes swimming every day. In order to continue the project of baby swimming, the baby's head can also be raised at that time, and he no longer likes to be strangled by the neck. The baby also needs a wider field of vision. The depth of the baby swimming pool cannot reach the purpose of the baby's swimming (the baby's feet touch the bottom of the pool). If you want to swim in the original baby swimming pool, you must increase the baby's swimming height or increase the depth of the pool. The neck is moved to the base of the thigh, which increases the height of the baby's swimming. In order to solve these two problems, the Inflatable Baby Swim Seat was created.
The Inflatable Baby Swim Seat has multiple independent airbags, and there is an anti-leakage device in the air nozzle, which is safe and reliable. The swimming ring is carefully designed, made and comfortable to wear according to the characteristics of the baby's thigh. Proper use can prolong the use time.
Baby Swimming Float, Inflatable Baby Pool Float Ring, Baby Float, Swimming Pool Toddler Floaties, Inflatable Baby Swim Float Lixin Outdoor Product Co., Ltd , https://www.jminflatablepool.com
