---------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------- Lovol Genset,Lovol Diesel Generator,Silent Lovol Diesel Generator Tiger Industrial Group Co., Ltd. , http://www.tigergeneratores.com
Main Features
Unique machine structure:
a. High-strength frame: The further enhanced back frame and moving frame, the whole EPS automatic shape moulding machine adopts the body and foot, and makes the frame and machine feet integrated, This greatly increases the frames strength and sturdiness.
b. The EPS automatic shape moulding machines are treated with zinc spraying after the manufacturing works which improves load life of the machine.
c. The automatic moulding machine with vacuum adopts opposite directions type tie bar for easy maintenance and wear resistance. The self-lubricating copper tube which solves original tie bar bushing's problem and improves the lubrication effectiveness.
d. The preventing plate and back mould plate of the automatic moulding machine with vacuum are all stainless steel, which reduces the wear and rust of the mold precision.
Hydraulic Pressure System:(save 6S/cycle):
a. Compared to the T and A type machine, our new E type machine with hydraulic system achieves faster operation for 250mm/speed from 180mm/second. The automatic moulding machine with vacuum can effectively improve production efficiency.
b. Hydraulic cylinders for the machine frame movement have safety locking of the mold during the steaming process and avoids the leakage of steam.
c. Special hydraulic pressure design: the ejecting cylinder and de-mold cylinder can be running simultaneously, which senses the de-mold gas blowing and product ejection synchronization effectively, reducing running time and improves de-mold capability.
Steam System:(ensure stable and less steam consumption)
a. Fang-Yuan patented PID system made by DN50 actuator makes the sensitive steam pressure control between 0.10-0.15Mpa,+/0.1Mpa tolerance giving us reduced heating time saving around 25%-30% of energy consumption.
b. The thermocol shape moulding machine controls the steam pressure by balance valve and pressure sensor instead of electronic connector pressure gauge. The mold pressure can be set by touch screen to make easy and accurate control.
Piping System:
a.For the complete inlet and outlet of water, air and steam, we use big pipeline and vales which are very close to the mold, reducing the excess energy consumption, while improving running speed of the thermocol shape moulding machine.
Vacuum System:
a.The EPS automatic moulding machine adopts vertical vacuum system, with 4-6" large drain pipeline and long length of condensation drainpipe. The vacuum tank is equipped with a big spraying system,which sprays the rising hot steam directly, and increases condensation rate. Thus,improving vacuum suction efficiency and achieves vacuum as main cooling instead of main water cooling(normally water cooling will be set only 8-12s). This enables the product of water percentage≤10%,In addition, the spray header of the replacement and maintenance is very convenient.
Control System:
a. All pressure adjustments of EPS automatic moulding machine are remote controlled by the control box, such as cross steaming, Main steaming, Filling also adjusted in touch screen according to different foaming area. The program also has many self-protection and alarm systems.
b. The thermocol shape moulding machine adoptes remote control system for all control pressure parts, electrics parts, valves, gauges and hydraulic parts sourced from famous international brands with quality to ensure stable and smooth running.
2. Technical Data of Styrofoam Decorative Building Parts EPS Shape Molding Machine
Estabished in 1988, We specialize in manufacturing all kinds of EPS(expandable polystyrene) machine, these are widely applicable in the package and construction sectors, such as vegetable and fish box, electric parts package, wall and roof indulation, house decoration and so on.
Concepto
unidad
SPZ100E
SPZ120E
SPZ140E
SPZ160E
SPZ175E
SPZ180E
SPZ200E
Dimensiones molde
mm
1000×800
1200×1000
1400×1200
1600×1350
1750×1450
1800×1600
2040×1800
Dimensiones máximas del producto
mm
800×600
×3501000×800
×3501200×1000
×3501400×1100
×3501550×1200
×3501610×1400
×3501850×1600
×350
Carrera
mm
220-1470
220-1470
220-1470
220-1470
220-1470
220-1470
220-1470
Entrada vapor
mm
DN80
DN80
DN80
DN100
DN100
DN100
DN100
Consumo vapor
kg/kg
(8-10T) Vapor por 1T de material
Entrada de agua
mm
DN50
DN50
DN65
DN65
DN65
DN65
DN80
Consumo agua de enfriamiento
kg/ciclo
40-120
45-140
50-150
55-180
60-190
80-200
90-210
Entrada aire comprimido
mm
DN25
DN40
DN40
DN40
DN40
DN50
DN50
Consumo aire comprimido
m³/ciclo
1.2
1.5
1.8
2
2
2.2
2.5
Capacidad bomba de vacÃo
m³/h
165
165
230
280
280
280
280
Potencia total instalada
Kw
10.6
10.6
14.1
14.1
14.1
22.1
22.1
Dimensiones generales
mm
4800×1850
×29704800×2050
×31704970×2250
×33704970×2440
×34304970×2590
×35305100×2700
×38305100×2900
×4030
Peso de la máquina
kg
4200
4800
5500
5800
6200
6500
7000
Tiempo de ciclo
s
60-90
60-100
60-120
70-130
70-130
80-140
100-180
2. Pictures of Styrofoam Decorative Building Parts EPS Shape Molding Machine
----------------------------------------------------------------------------------------------------------------
Packaging & Shipping
Packing:Â standard exporting package
Shipping port:Â shanghai/ningbo
----------------------------------------------------------------------------------------------------------------
WE can provided this service
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc.Â
3. Engineers go to clients' factory in time for installation , training and trial production .Â
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.   Â
----------------------------------------------------------------------------------------------------------------
Our Company information
Â
How to contact us?
Add: Xindeng industrial zone,Fuyang, Hangzhou city, Zhejiang province, China
Pc: 311404
Fax:/Tel: +86-571-63252570
Main Features
Unique machine structure:
a. High-strength frame: The further enhanced back frame and moving frame, the whole EPS automatic shape moulding machine adopts the body and foot, and makes the frame and machine feet integrated, This greatly increases the frames strength and sturdiness.
b. The EPS automatic shape moulding machines are treated with zinc spraying after the manufacturing works which improves load life of the machine.
c. The automatic moulding machine with vacuum adopts opposite directions type tie bar for easy maintenance and wear resistance. The self-lubricating copper tube which solves original tie bar bushing's problem and improves the lubrication effectiveness.
d. The preventing plate and back mould plate of the automatic moulding machine with vacuum are all stainless steel, which reduces the wear and rust of the mold precision.
Hydraulic Pressure System:(save 6S/cycle):
a. Compared to the T and A type machine, our new E type machine with hydraulic system achieves faster operation for 250mm/speed from 180mm/second. The automatic moulding machine with vacuum can effectively improve production efficiency.
b. Hydraulic cylinders for the machine frame movement have safety locking of the mold during the steaming process and avoids the leakage of steam.
c. Special hydraulic pressure design: the ejecting cylinder and de-mold cylinder can be running simultaneously, which senses the de-mold gas blowing and product ejection synchronization effectively, reducing running time and improves de-mold capability.
Steam System:(ensure stable and less steam consumption)
a. Fang-Yuan patented PID system made by DN50 actuator makes the sensitive steam pressure control between 0.10-0.15Mpa,+/0.1Mpa tolerance giving us reduced heating time saving around 25%-30% of energy consumption.
b. The thermocol shape moulding machine controls the steam pressure by balance valve and pressure sensor instead of electronic connector pressure gauge. The mold pressure can be set by touch screen to make easy and accurate control.
Piping System:
a.For the complete inlet and outlet of water, air and steam, we use big pipeline and vales which are very close to the mold, reducing the excess energy consumption, while improving running speed of the thermocol shape moulding machine.
Vacuum System:
a.The EPS automatic moulding machine adopts vertical vacuum system, with 4-6" large drain pipeline and long length of condensation drainpipe. The vacuum tank is equipped with a big spraying system,which sprays the rising hot steam directly, and increases condensation rate. Thus,improving vacuum suction efficiency and achieves vacuum as main cooling instead of main water cooling(normally water cooling will be set only 8-12s). This enables the product of water percentage≤10%,In addition, the spray header of the replacement and maintenance is very convenient.
Control System:
a. All pressure adjustments of EPS automatic moulding machine are remote controlled by the control box, such as cross steaming, Main steaming, Filling also adjusted in touch screen according to different foaming area. The program also has many self-protection and alarm systems.
b. The thermocol shape moulding machine adoptes remote control system for all control pressure parts, electrics parts, valves, gauges and hydraulic parts sourced from famous international brands with quality to ensure stable and smooth running.
2. Technical Data of Styrofoam Decorative Building Parts EPS Shape Molding Machine
Estabished in 1988, We specialize in manufacturing all kinds of EPS(expandable polystyrene) machine, these are widely applicable in the package and construction sectors, such as vegetable and fish box, electric parts package, wall and roof indulation, house decoration and so on.
Concepto
unidad
SPZ100E
SPZ120E
SPZ140E
SPZ160E
SPZ175E
SPZ180E
SPZ200E
Dimensiones molde
mm
1000×800
1200×1000
1400×1200
1600×1350
1750×1450
1800×1600
2040×1800
Dimensiones máximas del producto
mm
800×600
×3501000×800
×3501200×1000
×3501400×1100
×3501550×1200
×3501610×1400
×3501850×1600
×350
Carrera
mm
220-1470
220-1470
220-1470
220-1470
220-1470
220-1470
220-1470
Entrada vapor
mm
DN80
DN80
DN80
DN100
DN100
DN100
DN100
Consumo vapor
kg/kg
(8-10T) Vapor por 1T de material
Entrada de agua
mm
DN50
DN50
DN65
DN65
DN65
DN65
DN80
Consumo agua de enfriamiento
kg/ciclo
40-120
45-140
50-150
55-180
60-190
80-200
90-210
Entrada aire comprimido
mm
DN25
DN40
DN40
DN40
DN40
DN50
DN50
Consumo aire comprimido
m³/ciclo
1.2
1.5
1.8
2
2
2.2
2.5
Capacidad bomba de vacÃo
m³/h
165
165
230
280
280
280
280
Potencia total instalada
Kw
10.6
10.6
14.1
14.1
14.1
22.1
22.1
Dimensiones generales
mm
4800×1850
×29704800×2050
×31704970×2250
×33704970×2440
×34304970×2590
×35305100×2700
×38305100×2900
×4030
Peso de la máquina
kg
4200
4800
5500
5800
6200
6500
7000
Tiempo de ciclo
s
60-90
60-100
60-120
70-130
70-130
80-140
100-180
2. Pictures of Styrofoam Decorative Building Parts EPS Shape Molding Machine
----------------------------------------------------------------------------------------------------------------
Packaging & Shipping
Packing:Â standard exporting package
Shipping port:Â shanghai/ningbo
----------------------------------------------------------------------------------------------------------------
WE can provided this service
1. Value clients, guarantee equipment quality and answer clients' questions anytime and anywhere.
2. Customizing machines according to clients' inquiry , such as different design, different brand parts, different colors, more function,etc.Â
3. Engineers go to clients' factory in time for installation , training and trial production .Â
4. More spare parts are given to clients for free to ensure the factory working without suddenly stop.
5. 1 year free warranty, Lifetime technical service support.   Â
----------------------------------------------------------------------------------------------------------------
Our Company information
Â
How to contact us?
Add: Xindeng industrial zone,Fuyang, Hangzhou city, Zhejiang province, China
Pc: 311404
Fax:/Tel: +86-571-63252570
Styrofoam Decorative Building Parts EPS Shape Molding Machine
Model NO.: SPZ100-200E
Energy Saving Machine: Automatic Shape Molding Machine
Trademark: FANGYUAN
Transport Package: Wooden Cases
Specification: A class
Origin: China
HS Code: 84778000
Model NO.: SPZ100-200E
Energy Saving Machine: Automatic Shape Molding Machine
Trademark: FANGYUAN
Transport Package: Wooden Cases
Specification: A class
Origin: China
HS Code: 84778000
1. Main Features of Styrofoam Decorative Building Parts EPS Shape Molding Machine