Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyeya.com
Development Opportunities
Opportunity--The rapid development of China's automobile and tire industry
Automobiles have become an important pillar of the domestic economy and a hot spot for consumption in China. The Party's "eighteenth National Congress" clarified the income doubling plan for domestic residents, and the auto industry will maintain a sustained and stable development. This will create a strong demand for tires, which in turn will drive demand for tire machinery. According to the Chinese tire development plan, the rubber machinery industry must maintain a relatively rapid growth rate before it can be matched with the development of the tire industry.
Opportunity Two Countries' Importance and Investment in Equipment Manufacturing Industry
The state is implementing the ten major industry revitalization plans. Among them, three major revitalization plans are favorable to the formation of rubber machinery. The automobile industry revitalization plan has increased the demand for automobiles and tires and has driven demand for rubber machines. The petrochemical industry revitalization plan gives rubber machinery preferential policies and the possibility of margin financing.
The equipment manufacturing industry will adjust and revitalize plans to support independent innovation of technological equipment, support the export of equipment products, support the reorganization of equipment manufacturing backbone enterprises, and gradually form a large-scale enterprise group with engineering general contracting, system integration, international trade and financing capabilities. Support conditional companies to merge and restructure foreign companies and R&D institutions. At the same time, as one of the supporting policies for the revitalization of the equipment manufacturing industry, the use of the first equipment in the first set of equipment is not the first to introduce the risk. These provide strong support for the strength of rubber machinery.
Opportunity Three World Rubber Industry Center Transferred to China
For decades North America has been the center of production and consumption for the world rubber industry. After the financial crisis, the share of North American automobiles in the world has been showing a declining trend. The bankruptcy protection of the three giants has accelerated this trend. The clustering effect will shift large quantities of rubber, especially tire manufacturing capacity, from North America to emerging countries. Nowadays, the situation in North America's rubber industry is bleak. Demand has fallen sharply. The US Rubber Manufacturers Association recently predicted that US tire shipments this year will fall by more than 7% from last year. Tire manufacturers such as Michelin, Bridgestone and Goodyear are cutting North American production capacity or shutting down factories.
Judging from the current trend, the focus of rubber machinery transfer is in China, and China is gradually becoming the center of the world's tire industry. The world rubber industry has shifted to the domestic market and increased demand for rubber machinery. China's rubber machinery is nearing the water and takes advantage of the competition to increase the development potential of domestic rubber machinery.
Opportunity 4 Financial Crisis Will Accelerate China's Progress into a World Rubber Machinery Center
Foreign famous rubber machinery manufacturers have set up factories in China, and China is becoming the world's rubber machinery center. There are currently dozens of wholly-owned or joint-venture rubber machinery companies in the country, of which the more successful examples are beneficial to the production of vulcanizers by cooperation between Yangkoji and Kobe Steel and the cooperation of soft-control institutions and Matato to produce molding machines.
The financial crisis will increase China's attractiveness to the world's rubber machinery manufacturers, bring advanced machine types and technologies in the world, and accelerate China's development into a world rubber machinery center. China Rubber Machinery Factory can use its joint venture or solely foreign investment to grow and expand itself and increase the overall level of domestic rubber machinery. However, the increase in joint ventures and wholly-owned plants will rob the domestic market and increase the intensity of market competition.
Opportunity: Withdrawal of Foreign Rubber Machinery Manufacturers Provides Expansion Opportunities for Chinese Enterprises
Traditional rubber giants such as Japan’s Mitsubishi and Kobe Steel have gradually faded out of the industry, and the financial crisis has also accelerated this trend. Japan's Mitsubishi and Kobe Steel have basically given up production of mechanical vulcanizers and other products. Chinese rubber machinery companies are likely to get a large number of orders to further enlarge and strengthen.
On the one hand, the sales of these rubber machinery giants have decreased; on the other hand, the revenue of Chinese rubber machine manufacturers has grown rapidly. Chinese camera manufacturers are very likely to be included in the top three in recent years. North American rubber machinery is now struggling to survive, and is an excellent opportunity to acquire or control some of the most technologically advanced rubber machine manufacturers. Domestic rubber machine companies can conduct capital operations and establish rubber machineries or service outlets overseas.
Opportunity Six Global Giants Global Purchasing Strategies Provide More Business Opportunities
The four big tire companies Michelin, Bridgestone, Goodyear, and China are continuously releasing their purchasing power and entering the open market to purchase more things. Business opportunities are huge. China Rubber Machinery has established a good reputation in the international market. Michelin and other large quantities of Chinese rubber machines are purchased for domestic companies with a good advertising effect, which is the basis and short-cut for the industry to open up the international market.
Opportunity Seven Chinese rubber machine companies have full production capacity to help develop emerging markets
The development of radial tires and engineering tires in developing countries such as India has not been affected by the financial crisis. Its low level of meridianization, backward production technology, and demand for a complete set of rubber machinery and production technology. China Rubber Machinery has a full range of tire production line capabilities and technical level to meet the needs of radial tires. In particular, the vulcanizers and molding machines for cluster products have reached the international advanced level. From the completeness of equipment procurement, Chinese rubber machinery has more advantages. At the same time, domestic rubber machinery is familiar with the tire manufacturing process, and here with domestic companies to develop emerging markets.
Prospects
China has become a big country in the production and consumption of tire machinery. There are many weaknesses and deep-seated conflicts that need to be resolved on the way forward. Only through product upgrading can we resolve the bottleneck and realize the dream of a powerful Chinese tire machinery country.
The upgrade direction of China's tire machinery products is through the provision of energy-saving, high-efficiency, environmentally-friendly, and safe rubber machine equipment, with the focus on compact design, high-tech refinement, saving materials, integration of optoelectronics, PC networking, and electronic information. Accelerate the structural adjustment of the rubber machinery industry and products and change the mode of economic production.
Through scientific and technological advancement and management innovation, we will promote the upgrading of rubber machinery equipment, continuously improve the comprehensive competitiveness of the camera industry, and make the company bigger, better and stronger. Through the establishment of expanded business groups in various forms, going global for development, aiming at the domestic and international markets to implement the globalization strategy, China will become a global rubber machine powerhouse from a global camera industrial powerhouse in a decade or so.
The upgrading of rubber machine products should focus on eliminating and stopping the production and sales of old and backward energy-saving equipment. Not only did the company completely stop production of bias tire equipment, but it also fully upgraded the first-generation radial tire equipment and armed the tire factory with a new type of fully automated equipment, especially to occupy the dominant position with high-end equipment to achieve environmental protection, energy efficiency, and high efficiency and safety. purpose.
In the area of ​​rubber processing equipment, the promotion of low-temperature energy-saving primary rubber production lines consisting of internal and external cascade mills developed by Dalian Rubber & Plastics Co., Ltd. in conjunction with multiple open mills, and the formation of upper and lower series of two internal mixers developed by Yiyang Rubber Press The high-quality closed-type one-time mixing unit, the above-mentioned two successfully developed powerful energy-saving frequency conversion giant mixers, and Guangzhou Chemical Industry Baichuan improved innovative intelligent mixer.
In addition, Qingdao University of Science and Technology and Beijing University of Chemical Technology will continue to explore research and development to expand the screw continuous mixing production line. In the area of ​​extrusion process equipment, pin-type cold-feed extruders have been fully implemented, and in principle the current hot-feed extruders have gradually been eliminated. Accelerate the promotion and production of compound cold feed extrusion units and production lines developed by Guilin Rubber Design Institute Co., Ltd. and Inner Mongolia Fute Rubber Machinery Co., Ltd., especially the three to four composite extruders. Developed five compound and gear pump extruders. Developed a large-scale extrusion line for the L-type cold feed to expand production of films and steel cords with a width of more than 1 meter.
In calendering process equipment, it is mainly the transformation of the current calenders, further precision, safety, energy saving, the development of large-scale four-roll rolling equipment and linkage devices. In the tire molding process equipment, the company promoted the production of Tianjin Saixiang Technology, Beijing Betri Dray Technology, soft control shares of the four-drum drum radial truck tire assembly unit, Beijing Jingye machinery equipment.
In terms of vulcanization process equipment, the company vigorously promotes the production of energy-saving tire vulcanizers, and vulcanization of mechanical tires realizes diversified and characteristic development, such as various models such as tipping, translational, spiral, and mechanical and hydraulic hybrids. , jointly win the survival of the fittest in market competition. In addition, the expansion of the development of hydraulic tire vulcanizers, the proportion of production from the current 50% expanded to 60% -80%. At the same time, intelligent curing units and production lines will be industrialized.