Japan NSK Bearings Releases High Speed ​​New Series of Low Noise Ball Screws

Japan Seiko Co., Ltd. recently launched a new NSK - high-speed low-noise ball screw series, and the traditional ball screw, the bearings can achieve up to 5000rpm speed, and its small shaft diameter, compact structure, so that precision parts noise Also get a synchronous improvement.

The NSK low-noise ball screw series adopts small shaft diameter and maximum lead to reduce the load on the engine, which improves the smooth speed, can reach speeds of more than 1 meter/second, and the maximum speed reaches 5,000 rpm. . It also uses NSK's patented K1(TM) lubrication unit for maintenance-free operation. During operation, it does not suffer from noise due to inadequate oil supplementation and loss of grease. In addition, the series also uses the smallest low-profile nut on the market. This nut reduces the height of the flange nuts by up to 33%, which is of great significance for achieving a more compact device.

NSK high-speed low-noise ball screw series main shaft diameter specifications (? = 6 mm, ? = 8 mm), the maximum lead (15 mm, 12 mm, 10 mm, 8 mm). Due to its high speed and high precision multi-point positioning, this series of products can replace linear motion and small cylinders. NSK bearings - high-speed low-noise ball screw series because of its precise positioning and short cycle become the ideal choice for semiconductor chip inserter and parts alignment equipment.