It is high-performance water reducing agent is 3rd generation high-performance water reducing agent. It has excellent comprehensive index. And it is green and environmental friendly product.
It has excellent dispersing capacity. It is especially appropriate for mortar, wear-resistant floor, self-leveling floor and grouting material.
Features and Benefits:
1. Excellent compatibility with various types of cements.
2. High water reducing rate, low dosage, and low slump loss.
3. Low chloride and alkali content, no corrosion to steel-bar.
4. High stability: no precipitation at low temperature.
5. Environmental friendly and nontoxic.
6.Cement paste fluidity more than 250mm,with a dosage of 0.1%.
7.Short delivery time and good sales-after service.
Application:
1.Used in high performance and high strength concrete with high construction requirements.
2.Used in high slump concrete,ready minxed concrete,and pumping concrete.
3.Used in the concrete of high buildings,hydraulic engineering,transport system,port engineering,and municipal engineering etc.
4.Used in other high-lift concrete for specific building.
Mainly Model:DOP,DOA,DINP and DOTP
Phthalate Plasticizer,Phthalic Acid Esters,Concrete Plasticizer,Drywall Plasticizer HENAN JINHE INDUSTRY CO.,LTD , https://www.speciatyelement.com
Adopting the integrated master station design scheme requires the construction of a large-scale master station system that includes the functions of geographic information systems. The functions are perfect and resources and information can be fully shared to prevent overlapping of equipment and functions. At the same time, duplicate investments can be avoided. The disadvantages are the complexity of the system, the large investment, and the long construction period. Because the functions are too concentrated, the reliability of the system is required to be high, so the impact of system failure is large.
The integrated master station scheme is a vast system project that is applicable to power supply units with a relatively developed economy and abundant capital. In China, distribution automation is still in its infancy, and there is no long-term operation experience. There are many contents that do not have standards and specifications, and it is not advisable to establish a large-scale distribution network management system with complete functions. From the point of view of realizing the function of distribution automation, that is, substation automation and feeder automation, in order to save investment and enhance system flexibility, a large integrated master station system is not required, and a two-stage master station mode may be used.
Distribution system automation master mode
The integrated master station mode of the distribution management system refers to the use of a master station system to monitor and manage all the distribution networks in the areas under his jurisdiction. The system communication predecessor communicates with all substation systems within the jurisdiction, remote terminal unit (RTU), feeder remote terminal (FTU), transformer test terminal (TTU), etc., using a unified database, including SCADA at the master station level. Distribution management systems, including systems and feeder automation systems, manage distribution networks.