Aw Series Pneumatic Actuators, Scotch Yoke

Model NO.: AW13-AW60
Acting Type: Double Acting
Material: Aluminum
Customized: Customized
Structure: Rack and Pinion
Certificates: ISO,Ce,Atex
Color: Blue,Red,etc
Type: Double Acting and Single Acting
Trademark: ZT
Transport Package: Wooden Case, Pallet
Specification: AW13-AW60
Origin: China
HS Code: 8412390000
Model NO.: AW13-AW60
Acting Type: Double Acting
Material: Aluminum
Customized: Customized
Structure: Rack and Pinion
Certificates: ISO,Ce,Atex
Color: Blue,Red,etc
Type: Double Acting and Single Acting
Trademark: ZT
Transport Package: Wooden Case, Pallet
Specification: AW13-AW60
Origin: China
HS Code: 8412390000
AW Series Pneumatic Actuators, Scotch Yoke
Aw Series Pneumatic Actuators, Scotch Yoke


1. Introduction

Its scotch yoke structure makes piston rod move from linear to rotary.Special U-type output torque structure is used for valve opening or closing,which needs large torque.The structure is novel and flexible.It can generate 50% torque than common rack and pinion pneumatlc actuator.It is suitable for large and medium size valves and is widely used in automatic and remote control operations.Piston air chamber is sealed and separated from scotch yoke mechanism.Air consumption is small.

2. Specifications

General Design

Pneumatic Double-Cylinder Double-Piston Shifting fork Type Actuator;

Model AW Means Double-Acting;

Model AWS Means Single-Acting Spring Return.

Rotary Angle

Double-Acting 90°;

Single-Acting 90°;

Adjusted from -5° ~ +5° from two ends.

Operating Temperature

-20ºC ~ 90ºC

Air supply Pressure

0.3 ~ 0.7MPa.

3. Model Defination

4. Actuator Selection & Installation
When select the actuator, the torque of valve must be identified firstlγ, then consider the fluid; Add 25% security value when it is steam or non-Iubricated; Add 60% security value when it is non-Iubricated dry gas media; Add 100% security value when it is non-Iubricated gas transmission particles media; Add 20% security value when it is clean and no friction lubrication media; Then check the double-acting or single-acting type torque form according to air source pressure, and the model of actuator can be chosen correctly.

5. Actuator & Accessory Function
Double - acting pneumatic actuator;Double position control of valve's open or close Spring Return: Valve open or close automatically when circuit ,gas is cut off or failure (Explosion-prool offer available) Single-control solenoid valve: Valve opens or closes when power on , vice versa(explosion-proof offer available) Double-control solenoid valve: Valve opens when one coil is power-on. Valve closes when another coil is power-off. It has memory-save function (explosion-proof offer available) Limit Switch 60x: Long -distance transmission of valve position signal (explosion-proof offer available) Electric Locato r: Regulate and control the flow of media accord ing to current signal (Standard 4-20mA)
(explosion-proof offer avai lable)
Pneumatic Locator; Regulate and control the flow of media according to pressure signal IS tandard 0.02- 0.1MPa)
Electrical Converters: It converts current signal into pressure signal, and used with pneumatic locator (explosion-proof offer available)
Air Source Treatment Triple-Unit: It includes pressure reducer , filter, oil mist and has air pressure -stability,air source - cleaning ,parts - lubrication functions
Manual Operation Institutions: It can be manual operated if automatic operation is out of control

6. Order Notice
Pneumatic valve is complex intelligent-control instrument that is a combination of pneumatic components . Users must choose accessories detailed according to their requirements , and note on
technology contracts
1). Pneumatic Actuators , (1) Double-Acting ,(2) Single-Acting ,(3) Model
2). Solenoid Valve, (1) Single-Control Solenoid Valve ,(2) Double-Control Solenoid Valve ,(3) Voltage ,(4) Explosion-Proof Type
3). Feedback Signal , (1) Mechanical Switches ,(2) Approachable Switches, (3) Output Current Signal ,(4) Voltage ,(5) Explosion-Proof Type
4) Locator: (1) Electric Locator, (2) Pneumatic Locator, (3) Current Signal,(4) Air Pressure Signal ,(5) Electrical Converter,(6) Explosion-Proof Type
5). Air Source Treatment Triple- Unit (1 )Filter & Pressure Reducer Valve ,(2)Oil Mist
6). Manual Operation Institution
7). Special interface Size
8). Special Order
Company Introduction:   
Zhitai Valve Co., Ltd is a member of Valve Association of Longwan District, is located in Longwan Central Industrial Zone, Wenzhou City. It'a professional technology company integrated with development, manufacturing, sales, and after-sales services of valve actuators and and self-controlled valves. Presently, our main products include: pneumatic actuators, pneumatic valves and pneumatic control valves; electric actuators, electeic valves and eletric control valves; automatic control products. Our products are widely applied in natural gas, electricity, petroleum, chemical, metallurgical, construction, pharmacy, paper, printing and dying. Zhitai series actuators and valves are the best choice for automatic fluid control engineering and equipment manufacturing. We sincerely welcome customers from home and abrode to visit us for supervision, communication and cooperation. It's a great honor for us to cooperate with you.
Aw Series Pneumatic Actuators, Scotch Yoke

AW Series Pneumatic Actuators, Scotch Yoke
Aw Series Pneumatic Actuators, Scotch Yoke


1. Introduction

Its scotch yoke structure makes piston rod move from linear to rotary.Special U-type output torque structure is used for valve opening or closing,which needs large torque.The structure is novel and flexible.It can generate 50% torque than common rack and pinion pneumatlc actuator.It is suitable for large and medium size valves and is widely used in automatic and remote control operations.Piston air chamber is sealed and separated from scotch yoke mechanism.Air consumption is small.

2. Specifications

General Design

Pneumatic Double-Cylinder Double-Piston Shifting fork Type Actuator;

Model AW Means Double-Acting;

Model AWS Means Single-Acting Spring Return.

Rotary Angle

Double-Acting 90°;

Single-Acting 90°;

Adjusted from -5° ~ +5° from two ends.

Operating Temperature

-20ºC ~ 90ºC

Air supply Pressure

0.3 ~ 0.7MPa.

3. Model Defination

4. Actuator Selection & Installation
When select the actuator, the torque of valve must be identified firstlγ, then consider the fluid; Add 25% security value when it is steam or non-Iubricated; Add 60% security value when it is non-Iubricated dry gas media; Add 100% security value when it is non-Iubricated gas transmission particles media; Add 20% security value when it is clean and no friction lubrication media; Then check the double-acting or single-acting type torque form according to air source pressure, and the model of actuator can be chosen correctly.

5. Actuator & Accessory Function
Double - acting pneumatic actuator;Double position control of valve's open or close Spring Return: Valve open or close automatically when circuit ,gas is cut off or failure (Explosion-prool offer available) Single-control solenoid valve: Valve opens or closes when power on , vice versa(explosion-proof offer available) Double-control solenoid valve: Valve opens when one coil is power-on. Valve closes when another coil is power-off. It has memory-save function (explosion-proof offer available) Limit Switch 60x: Long -distance transmission of valve position signal (explosion-proof offer available) Electric Locato r: Regulate and control the flow of media accord ing to current signal (Standard 4-20mA)
(explosion-proof offer avai lable)
Pneumatic Locator; Regulate and control the flow of media according to pressure signal IS tandard 0.02- 0.1MPa)
Electrical Converters: It converts current signal into pressure signal, and used with pneumatic locator (explosion-proof offer available)
Air Source Treatment Triple-Unit: It includes pressure reducer , filter, oil mist and has air pressure -stability,air source - cleaning ,parts - lubrication functions
Manual Operation Institutions: It can be manual operated if automatic operation is out of control

6. Order Notice
Pneumatic valve is complex intelligent-control instrument that is a combination of pneumatic components . Users must choose accessories detailed according to their requirements , and note on
technology contracts
1). Pneumatic Actuators , (1) Double-Acting ,(2) Single-Acting ,(3) Model
2). Solenoid Valve, (1) Single-Control Solenoid Valve ,(2) Double-Control Solenoid Valve ,(3) Voltage ,(4) Explosion-Proof Type
3). Feedback Signal , (1) Mechanical Switches ,(2) Approachable Switches, (3) Output Current Signal ,(4) Voltage ,(5) Explosion-Proof Type
4) Locator: (1) Electric Locator, (2) Pneumatic Locator, (3) Current Signal,(4) Air Pressure Signal ,(5) Electrical Converter,(6) Explosion-Proof Type
5). Air Source Treatment Triple- Unit (1 )Filter & Pressure Reducer Valve ,(2)Oil Mist
6). Manual Operation Institution
7). Special interface Size
8). Special Order
Company Introduction:   
Zhitai Valve Co., Ltd is a member of Valve Association of Longwan District, is located in Longwan Central Industrial Zone, Wenzhou City. It'a professional technology company integrated with development, manufacturing, sales, and after-sales services of valve actuators and and self-controlled valves. Presently, our main products include: pneumatic actuators, pneumatic valves and pneumatic control valves; electric actuators, electeic valves and eletric control valves; automatic control products. Our products are widely applied in natural gas, electricity, petroleum, chemical, metallurgical, construction, pharmacy, paper, printing and dying. Zhitai series actuators and valves are the best choice for automatic fluid control engineering and equipment manufacturing. We sincerely welcome customers from home and abrode to visit us for supervision, communication and cooperation. It's a great honor for us to cooperate with you.
Aw Series Pneumatic Actuators, Scotch Yoke

High Speed CNC Drilling & Marking Line For Angles 


Efficiency Case:

250*250*32mm angle size, hole dia. 22mm, SANDVIK drill bits, rotation speed 2200rpm, one hole takes 6 seconds.

One day (8 hours) gets 65 tons output.

9 minutes finish one angle length of 14 meters, with 60 holes.

The production line is composed of infeed transfer table unit, rotating loading unit, feeding conveyor unit, marking unit, two drilling units, outfeed conveyor unit, hydraulic system and electrical control system etc.


â–²Adopt CNC technology, servo motor infeeding, with high efficiency, stable working precision.

â–²Key hydraulic, pneumatic and electric elements are all domestic and international brand.

â–²Easy programming and can directly use  the program data made by lofting software.

â–²Software with Chinese, English  interface, easy operation, and can display the drawing of workpiece.

â–²Loading, marking, drilling and unloading are all performed automatically.

â–²Just need to input  size of work piece, diameter of holes,  stadia and quantity of workpiece when edit program, or use CAD/CAM lofting software direct conversion.

â–²The machining line is installed with supporting &straight pressing device.

â–²With avoided shearing functions, so as to process fixed length angles.

â–²With self-diagnosis failures function.

â–²Shearing unit is optional, using double blades cutting.


Drilling Unit (High Speed Drill Bits)

drilling unit

Samples:

samples


6 spindles separately controlled by 6 servo motors

6 spindles separately controlled by 6 servo motors


Close type marking unit, more stable and longer life

close type marking unit, more stable and longer life


Marking Unit: 

This unit is consists of fixed lathe bed, movable lathe bed, hydraulic pressure head and manual adjustment device. According to the order of computer, the unit marks on places required on the drawings. For making the marks clear and endurable, and avoiding the angle steel abrades character heads, it adds the functions of loading oil cylinder and lifting movable lathe bed. For satisfying the processing scope, it adds manual adjustment device, which can change the position of characters to adapt different standards angle steel.


Workpiece Table: It is driven by engine and retarder through chain wheel and chain. There are three long axis and six self-control shaft couplings to achieve synchronization of the chains. Thus the angle steel will be stable and make lower noise during feeding process. The function of this part is that feed angle steel into the chute and prepare to be taken by the clamp device.

 

Overturning Rack: It is driven by engine and retarder through chain wheel and chain. Thus it achieves synchronization of swivel arm of the four clamps devices through long axis and shaft couplings. The function of this part is to take angle from conveyor trough to feeding conveyor.

Angle Drilling Machine

Angle Drilling Machine,Steel Construction Drilling Machine,Angle Rocker Drilling Machine,CNC Angle Drilling Machine

Jinan Sunrise CNC Machine Co., Ltd , http://www.scmcnc.com