Plasma Cutting Consumables,Plasma Cutter Consumables,Compatible Electrodes,Plasma Cutting Electrode Changzhou Cewoo Equipment Co.,Ltd , https://www.cewoocut.com
What are the methods for using explosion-proof platform lights?
Instructions
According to the actual needs of the work site, determine the installation position and mode of the lamp, then prepare the corresponding length of Φ8 ~ Φ14 mm three-core cable from the distance of the lamp to the power contact, and thread the three-core cable into the cloth.
Loosen the compression nut of the lamp cable inlet (when it is delivered at the factory, it will not be used after using the steel pipe), introduce the power cable to the internal wiring, connect and fix, then tighten the cable and tighten the lamp cover. , tighten the set screw.
When replacing the bulb, unscrew the Phillips pan head screw that fixes the lamp ring and rotate the lamp ring counterclockwise to separate the lamp ring and the transparent member from the housing, remove the bulb, replace it with a new bulb, and press the opposite direction. Just install the lamp.
Warning: 1. When installing and maintaining the luminaire, the power must be cut off. 2. Non-professionals are not allowed to install or disassemble lamps.