QYM-Airport fence, by definition is mainly used in the airport as a protective fence.The net body is welded with 4.0/5.0 mm low carbon steel wire, the surface will be electrostatic polyester powder coated or PVC coated after electro-galvanized. 60 mm Y shaped square pipe will be put at 2.5m intervals for the connection of the mesh.Concertina wire will be put at the top of the fence to make the fence more securer.
Airport Fence,Prison Fence,Prison Security Fence,Prison Electric Fence Hebei Qianye Metal Product Co., Ltd. , https://www.qymetalfence.com
1 provides the best image quality:
In the VGA signal display, the image quality of the notebook is the highest. The CPU will display the data to be displayed on the graphics card. After the graphics card is processed to form a graphic signal (digital signal) to be displayed, the digital signal is directly driven to the LCD screen to form the display signal of the notebook. This is the most "original" signal. After any treatment and loss. After the graphic signal (digital) is converted by D/A to form an RGBHV signal, it needs to go through the A/D process when it reaches the display device, regenerate the digital signal, and drive the LCD and other devices. The signal at this time goes through D/A, D/A conversion results in losses in terms of bandwidth, signal-to-noise ratio, etc. For example: According to the Nyquist sampling principle, the maximum analog bandwidth is only half of the sampling clock, and the signal-to-noise ratio is only about 56dB (by 8bit quantization) . However, if the graphics signal (digital) is subjected to parallel/serial conversion to form a DVI signal output and then transmitted to the display device via the DVI, the serial/parallel conversion is only required to directly drive the LCD and other devices. This process does not pass through A. /D, D/A conversion will not cause signal loss.
2 reduces the loss of the signal in the transmission process:
During the transmission of analog signals, due to the amplitude and frequency stability of the transmission system, high- and low-frequency interference, power ground interference and reflection, etc., the signal loss is severe. It is very difficult to solve and deal with the above problems in the project. Some can't even be solved. However, these problems do not exist during digital signal transmission. The greatest advantage of digital transmission lies in its strong anti-interference ability and reconstruction. In simple terms, as long as the error in "0" and "1" is not detected in the transmission process, no error occurs. The signal at the receiving end is correct and lossless. The problem that is difficult to solve in analog transmission does not exist in the digital transmission process. This is a solution that fundamentally solves the problem, ensuring that the signal reaching the display device is the same as the signal displayed by the notebook. , Give full play to the advantages of display devices, and obviously improve the display effect of the entire system.
QYM-Airport fence
Advantages of DVI HD Matrix Signals
The advantages of DVI high-definition matrix signals: