Tube End Beveling Machine with Ce Certificate (2CPV)

Model NO.: 2CPV
Tube Od of Chamfer/Squaring/Deburring: 6-50mm
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
Model NO.: 2CPV
Tube Od of Chamfer/Squaring/Deburring: 6-50mm
Tube Od of Flaring: 3-50 mm
Tube Od of Beading: 6-45 mm
Tube Material: Titanium Alloys, Stainless Steel, Aluminum Alloy
Trademark: Hartco
Transport Package: Wood
Specification: OD6-50mm
Origin: Shanghai
HS Code: 8461909000
2CPV Table Model Tube End Finish Machine
Description: Table Model Tube End Finish Machine
Model: 2CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
  2. Weight: 160 kg
  3. Power supply: 220V±10%, 50Hz/60Hz, single phase
  4. Power: 1 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=5KN;
  8. Rotation axis: asynchronous motor, 0.75kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 3-50 mm;
  4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
  5. Flaring method: eccentric inner diameter rotary swage;
  6. Tube OD of beading: Φ6-45 mm;
  7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
  8. Beading method: inner diameter rotary swage;
  9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
  10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
  5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Tube End Beveling Machine with Ce Certificate (2CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Tube End Beveling Machine with Ce Certificate (2CPV)
  3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
    Tube End Beveling Machine with Ce Certificate (2CPV)
  4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Tube End Beveling Machine with Ce Certificate (2CPV) 
     
2CPV Table Model Tube End Finish Machine
Description: Table Model Tube End Finish Machine
Model: 2CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =460X650X380mm
  2. Weight: 160 kg
  3. Power supply: 220V±10%, 50Hz/60Hz, single phase
  4. Power: 1 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=5KN;
  8. Rotation axis: asynchronous motor, 0.75kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-50mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 3-50 mm;
  4. Tube WT of flaring: Stainless steel 0.4 ~ 1mm, Aluminum alloy 0.5 ~ 1.5mm;
  5. Flaring method: eccentric inner diameter rotary swage;
  6. Tube OD of beading: Φ6-45 mm;
  7. Tube WT of beading: stainless steel: ≤0.5mm, aluminum alloy: ≤ 1mm;
  8. Beading method: inner diameter rotary swage;
  9. Tube min clamp: 10mm (flare tube is based on material and wall thickness);
  10. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 10mm, which is the first and best level.
  5. Operating lever and clamping cylinder joint together, when pull the operating lever, the cylinder clamping automatic clamping tube, then the main shaft forward, after the processing complete, release lever, spindle retreat, cylinder clamping automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 10mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. The mechanical lever of connecting rod reduces the feed speed, operation more smooth and efficient.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Tube End Beveling Machine with Ce Certificate (2CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Tube End Beveling Machine with Ce Certificate (2CPV)
  3. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness.
    Tube End Beveling Machine with Ce Certificate (2CPV)
  4. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Tube End Beveling Machine with Ce Certificate (2CPV) 
     

Clutch Kit

Clutch kit includes Clutch Cover, Clutch Disc and clutch release bearing.

SYC Clutch has developed SET / KIT products for years, in order to provide various benefits for our customers.


Clutch kit

Function of the Clutch

  1. Function of transmitting the torque from the engine to the drivetrain.
  2. Smoothly deliver the power from the engine to enable smooth vehicle movement.
  3. Perform quietly and to reduce drive-related vibration.
  4. Protect the drivetrain when given the inappropriate use. Given the situation, the SYC clutch will fail when given the inappropriate use in turn to protect the rest of the drivetrain, similar to the function of an electric fuse.

 

Why replace the clutch as clutch kit?

1.    Improve durability. Reduce the cost of after sales.

2.    Better profit for All. Clutch Set / Clutch Kit product is expected to be more profitable for both distributors and drivers. Distributors can secure more sales by selling 3 components at a time while drivers can save their efforts by replacing the 3 components at on time.

3.    Enhanced Reliance. Clutch Kit includes all the clutch components including clutch cover, disc and bearing, customers can avoid any possible problem that could be caused by disharmony among parts manufactured by different makers.

If you have any questions, please contact with us directly. Welcome to visit our factory- SYC Clutch

Clutch Kit

Clutch Kit,Clutch Pressure Plate,Auto Clutch Kit,Clutch Disk

Yuhuan Shouyuan Machinery Co., Ltd. , http://www.sycclutch.com