In the process of industrial oxygen supply, the oxygen delivery pipeline must be equipped with a corresponding flow measurement system. Due to the need to economically calculate and collect fees, the measurement accuracy of oxygen flow has attracted more and more attention. In the past, most orifice plates were used to measure oxygen flow, and an appropriate intelligent flow meter was used to automatically compensate for errors caused by oxygen pressure and temperature changes to improve the measurement accuracy. The orifice plate has a simple structure and is widely adaptable to fluids and has been standardized. However, in practical applications, it sometimes results in errors that are difficult to estimate. The key is to detect a part at one time. As we all know, the traditional orifice plate throttling device has the disadvantage that it is difficult to overcome: the range ratio is too small, usually only 3:1, so that the large flow can not be taken into account, the small flow rate is often not measured, resulting in a large error in the cumulative flow value; Secondly, the orifice plate throttling device has a large pressure loss, which is not conducive to energy saving, and has a large amount of construction and high installation costs. Field Pipe Fusion Equipment fuses HDPE / poly / polyethylene pipe and fittings. The aluminum inserts of thermoplastic welding machines can be made in Metric size or IPS size. Wuxi Yuda HDPE Pipe Welding Machines can weld metric size from 40 to 3000mm. How do you fuse HDPE ? Generally speaking, HDPE pipe is butt fused by applying heat to prepared pipe ends and then pushing the pipe ends together with a pre-determined force to make a permanent butt fusion joint. It is a very simple process utilizing a properly sized butt fusion machine for the pipe size to be joined. The Metric HDPE Fusion Machines included:
5. Support with electric box for heating plate and planing tool
6. Hydraulic Unit
7.Plasitc welding tools (optional)
Metric HDPE Fusion Machine,HDPE Fusion Machine,HDPE Pipe Welding,HDPE Welding Machine WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com
1. Basic frame– machine body with 4 clamps
2. Complete set of clamp/ metric insert set
3. Heating plate
4. Planing tool