Liquid tank filter for waterproof tank glue

                 Liquid tank jelly rubber product specification

Liquid tank jelly glue product use:

Applied to the potting of high-efficiency filter tanks to play a role in waterproofing, sealing, etc.

Liquid tank jelly color

Transparent, sky blue

Liquid tank jelly glue use process:

1. Before mixing, first mix components A and B thoroughly in their respective containers.

2. When mixing, follow the A component: B component = 1 : 1 weight ratio.

3. HY may be necessary for the conduct defoaming 9400 when used. It may be the A, B After stirring the mixture evenly into the vacuum container, degassed under 0.08MPa 5 minutes, then perfused use.

4. The corresponding curing time should be maintained above the temperature given in the technical parameter table before and after curing. If the thickness is thicker, the curing time may exceed. Room temperature or heat curing can be. The curing speed of the adhesive is affected by the curing temperature. It takes a long time to cure in the winter. It is recommended that the adhesive be cured by heating. It should be cured at 80 to 100 °C for 20 minutes. It usually takes about 8 hours at room temperature to cure.