Taizheng Instruments launched a pneumatic automatic burst strength testing machine in July

Automatic burst strength testing machine features:
1. Adopt advanced microcomputer detection control system and digital signal processing technology to ensure accurate test data. 2.LCD liquid crystal display 3. With fast, high-quality micro-printer and complete and detailed test data report 4. With real-time calendar and clock, With power-down protection test data 5. Can save power and save double page display The last 99 test records 6. Built-in a small drawer can be placed in various supplies Fully automatic burst strength testing machine Specifications: TZ-101QA
Operation mode: Key operation display mode: LCD liquid crystal display indication error: ±0.5%FS
Indication variability: ≤0.5%
Automatic clamping and loosening device, sample clamping force: >690kPa (adjustable)
Test system tightness: pressure drop <10% Pmax within 1min
Resolution: 1kPa
Exhaust volume: (0.02~0.3) m3 /min
Rated pressure: (0.6~0.7) Mpa
Weight: about 50kg
Hydraulic oil: 85% glycerin, 15% distilled water
Clamp ring material: stainless steel SUS 304#
Clamp ring upper ring: high pressure type Φ 31.50mm
Lower ring: high pressure type Φ 31.50mm
Volume: 44 × 42 × 56cm
Power supply: AC220V±10%, 50Hz 120W
Burden resistance measurement range: 250~5600kPa
Pressurization speed: 170±15ml/min
Standard delivery: one wrench, 1 bottle of special glycerin, 1 bag of calibration film, 1 piece of rubber film can print 99 test values ​​(clamping force, minimum value, maximum value, average value, pressure difference, time)

Flame Retardant Hose

Fiber Strengthened Rubber Hosefor Fire-Fighting Use/Fiber Braided Hose
Braided Rubber Hose applies to the type MFT-20,type MFT-35, typ e MFT-50 and type MFT-70 portable drypowder fire extinguisher and fire-fighting use rub ber hose with baking soda and carbondioxide mixed.

Technical standard: Rubber Tubing is Q/XXC005-2009

Precautions.

1.Check whether the inspection cycle of acetylene hoses is expired.
2.Check whether the acetylene hose body has cracks, bulging, dent deformation, scratches and whether the base splicing welds are cracked and other problems.
3.Check the corrosion of the acetylene hose body, especially check the corrosion of the bottom and side seams of the acetylene bottle carefully.
4.Check whether the acetylene hose and accessories are defective and damaged.
5.Check whether the color of acetylene hose is off and discolored, if the color of the gas cylinder is not correct, check carefully to determine whether it is acetylene hose. If the new bottle should be pumped into vacuum and replenished with acetone. Open the cylinder valve and check whether the inner core and valve stem of the cylinder are intact and not slipping when measuring the residual pressure of gas with the residual pressure table.

Flame Retardant Hose,Flame Resistant Hose,Fire Retardant Hose,Rubber Hose For Water Delivery

Shaanxi Yanchang Petroleum Northwest Rubber Flexible Pipe Co., Ltd. , https://www.cnrtp.com