Single Stage Vertical Inline Circulation Pump

Model NO.: MSP/MSPR
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Open, Simi-Open, Closed
Usage: Slurry Pump, Sand Pump
Material: A05, A07, A49, Rubber, Polyurethane
Bearing: Imported Brand
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Certificate: SGS
Warranty: Within 1 Year
Application1: Mining
Application2: Heavy Industrial
Trademark: Depon
Transport Package: Plywood Cases/ as Customer Required
Specification: DN40-DN300mm
Origin: China
HS Code: 8413810090
Model NO.: MSP/MSPR
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Open, Simi-Open, Closed
Usage: Slurry Pump, Sand Pump
Material: A05, A07, A49, Rubber, Polyurethane
Bearing: Imported Brand
Drive: Electric Motor/ Diesel Engine
Voltage: 220V/380V/410V/460V/High Voltage
Frequeccy: 50Hz/60Hz
Color: as Customer Required
Certificate: SGS
Warranty: Within 1 Year
Application1: Mining
Application2: Heavy Industrial
Trademark: Depon
Transport Package: Plywood Cases/ as Customer Required
Specification: DN40-DN300mm
Origin: China
HS Code: 8413810090
Single Stage Vertical Inline Circulation Pump

Single Stage Vertical Inline Circulation Pump

Product Presentation

-MSP heavy duty sump pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abraisive and high density slurries from sumps, pits and other submersible sources.

-Models are available in sizes ranging from 40mm to 250mm discharge and are capable of flow rates from 5 to 350 litres per second (79-5540 USGPM) at heads of up to 40 metres (130ft). The heavy duty design of the MSP pumps allows the passage of large particles with a diameter of up to 50mm.

-Pumps will continue to operate even when the top inlet is not submerged, allowing the liquid level to to be lowered to the bottom of the sump or pit. Suction extension pipes of up to 2metres in length can be added to the bottom inlet of the pump to extend the pumping depth.

-Designed as a fixed installation the MSP provides reliable pumping performance with minimal maintenance requirements and simple servicing.

Feature
 
CANTILEVERED SHAFT
The standard MSP pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

HEAVY DUTY WET END 
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

COLUMN AND DISCHARGE PIPES 
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

VERSATILE DRIVE OPTIONS
MSP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

REMOVABLE STRAINERS
MSP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.

Application

The MSP Heavy Duty Sump Pumps are capable of providing reliable and efficient performance for the transfer of abraisive and high density slurries from sumps, pits and tanks in a wide range of mining, processing and heavy industrial applications.

Single Stage Vertical Inline Circulation Pump

MSP/MSP(R) Sump Pump Clean Water Performance Table
 
TYPE Allowable
Mating
Max
Power		 Material Range of Performance Impeller
Liner Impeller Capacity (Q) Head(H) Max.Eff
(%)		 Speed
(r/min)		 NO. of
Vanes		 Impeller Diameter
(mm)
(m³/h) (L/s) (m)
40PV(L)-MSP 15 M M 19.44-43.2 5.4-12 4.5-28.5 40 1000-2200 5 188
40PV(L)-MSPR RU RU 17.28-39.6 4.8-11 4-26 40 1000-2200 5 188
65QV(L)-MSP 30 M M 23.4-111 6.5-30.8 5-29.5 50 700-1500 5 280
65QV(L)-MSPR RU RU 22.5-105 6.25-29.15 5.5-30.5 51 700-1500 5 280
100RV(L)-MSP 75 M M 54-289 15-80.3 5-35 56 500-1200 5 370
100RV(L)-MSPR RU RU 64.8-285 18-79.2 7.5-36 62 600-1200 5 370
150SV(L)-MSP 110 M M 108-479.16 30-133.1 8.5-40 52 500-1000 5 450
200SV(L)-MSP 110 M M 189-891 152.5-247.5 6.5-37 64 400-850 5 520
250TV(L)-MSP 200 M M 261-1089 72.5-302.5 7.5-33.5 60 400-750 5

575
 
300TV(L)-MSP 200 M M 288-1267 80-352 6.5-33 50 350-700 5 610
 Note: "M": Wear-resistant Alloy. "RU": Rubber

Material 
 
Description Standard Material Material Options
Shaft 4140 Mild Steel Available on Request
Bearing Housing Cast Iron  
Column Mild Steel  
Upper Strainer Rubber Cast Iron
Lower Strainer Cast Iron  
Back Liner 27% Chrome White Iron  
Pump Casing 27% Chrome White Iron Rubber Lined White Iron
Impeller 27% Chrome White Iron Rubber
Discharge Pipe Mild Steel Rubber Lined Mild Steel/ Composite
Adaptor Plate Mild Steel  
Single Stage Vertical Inline Circulation PumpSingle Stage Vertical Inline Circulation PumpSingle Stage Vertical Inline Circulation Pump
FAQ

A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


Welcome inquiry! 
Shirley She

Contact: 
Mob: +86 139 3227 8621
Tel: +86 312 8929296
Fax: +86 312 3085383
 
 
 
 
  Single Stage Vertical Inline Circulation Pump

Single Stage Vertical Inline Circulation Pump

Product Presentation

-MSP heavy duty sump pumps are vertical, shaft driven centrifugal slurry pumps designed for transferring abraisive and high density slurries from sumps, pits and other submersible sources.

-Models are available in sizes ranging from 40mm to 250mm discharge and are capable of flow rates from 5 to 350 litres per second (79-5540 USGPM) at heads of up to 40 metres (130ft). The heavy duty design of the MSP pumps allows the passage of large particles with a diameter of up to 50mm.

-Pumps will continue to operate even when the top inlet is not submerged, allowing the liquid level to to be lowered to the bottom of the sump or pit. Suction extension pipes of up to 2metres in length can be added to the bottom inlet of the pump to extend the pumping depth.

-Designed as a fixed installation the MSP provides reliable pumping performance with minimal maintenance requirements and simple servicing.

Feature
 
CANTILEVERED SHAFT
The standard MSP pumps feature a cantilevered shaft which is up to 2400mm long. The cantilevered shaft means that there is no shaft sealing requirement and the drive end bearings do not come into contact with any pumped product. This reduces the risk of bearing failure and extends the wear life of the pumps.

HEAVY DUTY WET END 
Wet end components are manufactured from high quality 27% chrome white iron or rubber coated steel for exceptional wear resistance and service life with minimal corrosion. The heavy duty design can pump high density and abraisive slurries and the large passages of the impeller allows the transfer of large particles without blockages in a wide range of mining, processing and heavy industrial applications. Wet end stub shaft options are available to suit severe duty applications.

COLUMN AND DISCHARGE PIPES 
Column and discharge pipes are available in a range of materials to suit the requirements of operators. Standard options include mild steel and rubber lined mild steel. Composite options are available.

VERSATILE DRIVE OPTIONS
MSP pumps can be directly driven using electric motors or belt driven with either set speed or variable speed operation.

REMOVABLE STRAINERS
MSP pumps feature rubber or cast iron upper strainers and cast iron lower strainers to prevent blockages. The strainers are easily removed for servicing or replacement.

"L" MODELS EXTENDED SHAFT
The extended shaft "L" model features column bearings and shaft seal which further extends the pumping depth and enables the transfer of slurries from deeper sumps and pits.

Application

The MSP Heavy Duty Sump Pumps are capable of providing reliable and efficient performance for the transfer of abraisive and high density slurries from sumps, pits and tanks in a wide range of mining, processing and heavy industrial applications.

Single Stage Vertical Inline Circulation Pump

MSP/MSP(R) Sump Pump Clean Water Performance Table
 
TYPE Allowable
Mating
Max
Power		 Material Range of Performance Impeller
Liner Impeller Capacity (Q) Head(H) Max.Eff
(%)		 Speed
(r/min)		 NO. of
Vanes		 Impeller Diameter
(mm)
(m³/h) (L/s) (m)
40PV(L)-MSP 15 M M 19.44-43.2 5.4-12 4.5-28.5 40 1000-2200 5 188
40PV(L)-MSPR RU RU 17.28-39.6 4.8-11 4-26 40 1000-2200 5 188
65QV(L)-MSP 30 M M 23.4-111 6.5-30.8 5-29.5 50 700-1500 5 280
65QV(L)-MSPR RU RU 22.5-105 6.25-29.15 5.5-30.5 51 700-1500 5 280
100RV(L)-MSP 75 M M 54-289 15-80.3 5-35 56 500-1200 5 370
100RV(L)-MSPR RU RU 64.8-285 18-79.2 7.5-36 62 600-1200 5 370
150SV(L)-MSP 110 M M 108-479.16 30-133.1 8.5-40 52 500-1000 5 450
200SV(L)-MSP 110 M M 189-891 152.5-247.5 6.5-37 64 400-850 5 520
250TV(L)-MSP 200 M M 261-1089 72.5-302.5 7.5-33.5 60 400-750 5

575
 
300TV(L)-MSP 200 M M 288-1267 80-352 6.5-33 50 350-700 5 610
 Note: "M": Wear-resistant Alloy. "RU": Rubber

Material 
 
Description Standard Material Material Options
Shaft 4140 Mild Steel Available on Request
Bearing Housing Cast Iron  
Column Mild Steel  
Upper Strainer Rubber Cast Iron
Lower Strainer Cast Iron  
Back Liner 27% Chrome White Iron  
Pump Casing 27% Chrome White Iron Rubber Lined White Iron
Impeller 27% Chrome White Iron Rubber
Discharge Pipe Mild Steel Rubber Lined Mild Steel/ Composite
Adaptor Plate Mild Steel  
Single Stage Vertical Inline Circulation PumpSingle Stage Vertical Inline Circulation PumpSingle Stage Vertical Inline Circulation Pump
FAQ

A: What kind of company you are?
Q: Shijiazhuang Depon Pump Company is professional manufacturer in pumps. After accumulation and development of many years, we have formed a complete system of pump design, selection, application, manufacture, marketing and maintenance. We have passed CE, SGS certificate. Our customers are at home and abroad. Hope to coorperate with the worldwide friends. 

Q: What's your MOQ?
A: Trial sample order is OK.
 
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A or as customer required
 
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
 
Q: What is the delivery time?
A: 7-30 days according to customer quantities.
 
Q: Can you do OEM brand?
A: Yes, Welcome.
 
Q: What information should I offer to get pump solution?
1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


Welcome inquiry! 
Shirley She

Contact: 
Mob: +86 139 3227 8621
Tel: +86 312 8929296
Fax: +86 312 3085383
 
 
 
 
 

Winder FRP DTRO MEMBRANE HOUSING:

DTRO (Disc Tube Module) is a kind of RO technology, a special module for high concentration of sewage treatment. It can deal with the landfill leachate, composted refuse landfill leachate treatment.

Winder DTRO FRP membrane housing/shell is original design housing module. It is produced by winding techniques, with high strength, smooth inner surface, excellent property of pressure and corrosion resistance.

Standard design, OEM and customized design all are available!

FRP Dtro Housing

FRP Dtro Housing,FRP Dtro Pressure Vessels,FRP Membrane Housings,FRP Dtro Shell

HEBEI CHENG DA PIPES CO.,LTD , http://www.chengdapipe.com