2000Amp peak current and 1000A start current lithium jump starter EPower-99A is extremely  powerful to start all vehicles 12V or 24V, even tank. Handheld jump starter is easy to take it out from your vehicle when you need it.  It is much less lighter and longer life cycles than the lead acid battery jump starter. Nowadays, lead acid battery heavy duty jump starter is gradually replaced by lithium battery jump starter in the automotive industry.  If you are running car repair store or sell professional automotive tool, why not try it? CHARGING XX% BATTERY XX% Shows up the amount of internal battery capacity. At least 60% are recommended to jump start a car. LOW BATTERY RECHARGE NOW USB1 USB2 ON WARNINGCLAMPS REVERSED Shows that the clamps are connected reversely. At this time the start is prevented. Please remove the clamps and connect them in the right way. The red clamp must be connected to the positive (+) terminal and the black clamp to the negative (-) terminal of the battery. If you are sure that the connections are correct but this warning still shows up, press the Power button for three seconds to ignore this warning. SHORT CIRCUIT CHECK ALL CONNECTIONS 12V JUMP START READY 24V JUMP START READY Shows up when EPower-99A is connected to a 24V battery and is ready to jump start. If EPower-99A cannot detect the battery or the battery is too low to be detected, you may use the "Expert Mode" for manually choosing your 24V battery type and jump start your 24V car battery. LED Flashlight: the lumen of led light is 3W, and there are three modes: lighting, strobe, and flashing. Please press the button on the front till 3 or 5 second to see the lighting. If you want to change the any of these mode,you can press it at one time.  * 3 in 1 USB cables * Home Charger * Smart jumper cable * Manual  1.Make sure the battery is not less than 60% shown on the LCD display. 3.When you use EPower-60 jump start 12V car,it diaplays"12V JUMP START READY",when you use EPower-60 jump start 24V car,it diaplays"24V JUMP START READY". 5.When the vehicle is restarted, please remove the jumper cable from Jump Starter and remove RED and BALCK clamps from the vehicle battery. 1200A 12V Truck Battery Booster 30000mAh 2000Amp peak current and 1000A start current lithium jump starter EPower-99A is extremely  powerful to start all vehicles 12V or 24V, even tank. Handheld jump starter is easy to take it out from your vehicle when you need it.  It is much less lighter and longer life cycles than the lead acid battery jump starter. Nowadays, lead acid battery heavy duty jump starter is gradually replaced by lithium battery jump starter in the automotive industry.  If you are running car repair store or sell professional automotive tool, why not try it? CHARGING XX% BATTERY XX% Shows up the amount of internal battery capacity. At least 60% are recommended to jump start a car. LOW BATTERY RECHARGE NOW USB1 USB2 ON WARNINGCLAMPS REVERSED Shows that the clamps are connected reversely. At this time the start is prevented. Please remove the clamps and connect them in the right way. The red clamp must be connected to the positive (+) terminal and the black clamp to the negative (-) terminal of the battery. If you are sure that the connections are correct but this warning still shows up, press the Power button for three seconds to ignore this warning. SHORT CIRCUIT CHECK ALL CONNECTIONS 12V JUMP START READY 24V JUMP START READY Shows up when EPower-99A is connected to a 24V battery and is ready to jump start. If EPower-99A cannot detect the battery or the battery is too low to be detected, you may use the "Expert Mode" for manually choosing your 24V battery type and jump start your 24V car battery. LED Flashlight: the lumen of led light is 3W, and there are three modes: lighting, strobe, and flashing. Please press the button on the front till 3 or 5 second to see the lighting. If you want to change the any of these mode,you can press it at one time.  * 3 in 1 USB cables * Home Charger * Smart jumper cable * Manual  1.Make sure the battery is not less than 60% shown on the LCD display. 3.When you use EPower-60 jump start 12V car,it diaplays"12V JUMP START READY",when you use EPower-60 jump start 24V car,it diaplays"24V JUMP START READY". 5.When the vehicle is restarted, please remove the jumper cable from Jump Starter and remove RED and BALCK clamps from the vehicle battery. 1200A 12V Truck Battery Booster 30000mAh SHAOXING CARESO PLASTIC CO., LTD. , https://www.caresoplastic.com
 Â
Â
2 .Accessories:
3. How to jumpstart lithium battery starter charger EPower-99A?
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
4.Start the vehicle.
 4. What vehicles can you start?
Auto battery engine booster 40000mAh EPower-99A can start up to all petrol cars, SUV, Mower, motocycles, or all diesel trucks, even tanks.5. Related Product:
1000Amp 24000mAh Heavy Duty Car Jump Starter
Gas & Diesel Mini Jump Starter 18000mAh
 Â
Â
2 .Accessories:
3. How to jumpstart lithium battery starter charger EPower-99A?
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
4.Start the vehicle.
 4. What vehicles can you start?
Auto battery engine booster 40000mAh EPower-99A can start up to all petrol cars, SUV, Mower, motocycles, or all diesel trucks, even tanks.5. Related Product:
1000Amp 24000mAh Heavy Duty Car Jump Starter
Gas & Diesel Mini Jump Starter 18000mAh
40000mAh Lithium Jump Starter for Car, SUV Truck, and Tank
Model NO.: EHUPG-99
Full Charging Time: About 10 Hours
Lifetime: >1000 Cycles
Trademark: EHUPG or clients′ brand
Transport Package: Box
Specification: 248*248*96mm
Origin: China
HS Code: 8507600090
Model NO.: EHUPG-99
Full Charging Time: About 10 Hours
Lifetime: >1000 Cycles
Trademark: EHUPG or clients′ brand
Transport Package: Box
Specification: 248*248*96mm
Origin: China
HS Code: 8507600090
1. 12V 2000A Peak Current CARKU Jump Starter for Tanks