20" Big Blue Pleated Filter Cartridge

  • Model NO.: MKHF-BB
  • Medium Material: Melt Blown
  • Filter Bag Filter: The Filter Type
  • Usage: Liquid Filter, Water Filter
  • Filter Bag Sectional Shape: Round Bag
  • Cartridge Installation: Vertical Lifting
  • Size: OEM
  • Length: 20inches
  • ID: 28mm
  • Trademark: OEM
  • Origin: Shanghai
  • Material: PP
  • Cartridge Filter: Non-Woven Polyester Fiber
  • Type: Pleated Filter Cartridge
  • Filtration Grade: PRE Filter
  • Filter Bag Environment: Room Temperature
  • Filter Media: Polypropylene
  • Micron Rating Nominal: 1 Micron \5 Micron\10micron\20micron\etc
  • Od: 4.5inches
  • Max.Flow: 4-25gpm
  • Specification: OEM
  • HS Code: 84219990
MKHF SERIES PLOYESTER PLEATED CARTRIDGE

20


Melko MKHF Series ployester pleated cartridges are manufactured from durable polyester to provide you with a superior pleated cartridge that is durable,washable,and reusable.MKHF Series can provide great dirt holding capacity to extend the time between cartridge change outs. MKHF Series can be used in residential,commercial,and industrial applications. The polyester media is pleated around a polypropylene core for added strength and the ends are immersed in a thermosetting Vinyl Plastisol which fuses the three components together forming a unified end cap and gasket.
 
Material of Construction:
Filter Media: Non-woven Polyester
End Caps: Vinyl Plastisol
Core: Polypropylene
Temperature Range: 40ºF to 125ºF(4.4ºCto51.7ºC)
 
Specification:
Micron Rating(μm): 1,5,10,20,30,50
Lengths(inch) :  10",20",30",40"
O. D.(inch) :  2.5",4.5"
I. D. (mm) : 28mm
*Note:Special Lengths and diameters available


Packaging & Shipping:
Packaging:
1.      Products are packed by shrink film. It can reduce abrasion when transport.
2.      Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1.      If this kind of products is in stock, the product will be sent for you 1-7days after payment.
2.      If this kind of products is not in stock, the products will take about 7-25 days to produce.
Shipping:
Maritime; Railway; Air (DHL/UPS/TNT/FEDEX)
 
Contacts:
If you have interest in any kind of our product, warmly welcome your inquiry. We will supply our best quality products and service for you.
 
Mobile: +8613818972204
Tel:  +86-021-57600791*816
Fax:  +86-021-57600792
 

Core Barrel&Overshot

Drilling tool assembly (P, H, N and B)
Relevant description of products:
Retrieve the inner tube with an overshot without lifting out the whole rods string to obtain the core, the wireline coring system lifts the underground core sample out of the borehole through the overshot to take back the entire inner tube and conduct sampling analysis. This improves productivity of the work site and guarantees safety of core sample during drilling down.
The system is realized through a fully independent inner tube. During its working, the inner tube does not connect with the overshot but locates at the bottom of the coring Drilling Rod directly (behind the coring drilling bit). An assembly device is installed on top of the inner tube, which includes coring and recycling functions. When the inner tube is full of core sample, the overshot is placed to the bottom from the borehole through a steel wire rope and lifted out by a winch. After the inner tube assembly is lifted to the surface, an empty inner tube is placed to the bottom of the hole to recover the drilling. This improves well drilling efficiency.
Our company provides core barrel assmeblies of different diameters to meet customers' demands. The wireline coring system is applicable for most drilling conditions and standard DCDMA hole sizes (B, N, H and P).
Currently, the company provides two models of wireline coring systems: double-tube and triple-tube
Core barrel assembly: It consists of inner tube and outer tube groups.
The inner part consists of the following parts: spearhead assemly, retrival components, core sample collection component, landing shoulder, stop ring and other parts.inner tube group, independent from outer tube group, collects core sample sample during well drilling.
The outer tube part consists of parts , which includes locking coupling, adapter coupling, outer tube, etc. The outer tube group that is kept at the bottom of the hole all the time holds the inner tube assembly during drilling.
The triple tube coring system AU3 has the same components as the dual-tube. And its interior has a third tube that is known as liner tube of the inner tube.
Liner tube of the inner tube is placed in the inner tube. The triple tube system can realize overall recovery ratio of core sample when drilling stratum with coal, clay or bigger crack. The liner tube or split tube keeps the core sample at its receiving status to collect or load and store easily.
Only N, H and P sizes are available for the triple tube coring system.

Core Barrel&Overshot,Core Barrel Overshot,Core Barrel For Geological,Core Barrel Of Diamond Core Driller

JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com